diff options
Diffstat (limited to 'keyboards')
| -rw-r--r-- | keyboards/amj60/Makefile | 70 | ||||
| -rw-r--r-- | keyboards/amj60/amj60.c | 30 | ||||
| -rw-r--r-- | keyboards/amj60/amj60.h | 153 | ||||
| -rw-r--r-- | keyboards/amj60/config.h | 94 | ||||
| -rw-r--r-- | keyboards/amj60/keymaps/iso_split_rshift/Makefile | 23 | ||||
| -rwxr-xr-x | keyboards/amj60/keymaps/iso_split_rshift/build.sh | 42 | ||||
| -rw-r--r-- | keyboards/amj60/keymaps/iso_split_rshift/keymap.c | 147 | ||||
| -rw-r--r-- | keyboards/amj60/keymaps/iso_split_rshift/readme.md | 30 | ||||
| -rwxr-xr-x | keyboards/amj60/keymaps/iso_split_rshift/updatemerge.sh | 4 | ||||
| -rw-r--r-- | keyboards/amj60/readme.md | 57 |
10 files changed, 650 insertions, 0 deletions
diff --git a/keyboards/amj60/Makefile b/keyboards/amj60/Makefile new file mode 100644 index 0000000000..1f695aa4d8 --- /dev/null +++ b/keyboards/amj60/Makefile @@ -0,0 +1,70 @@ + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID + +ifndef QUANTUM_DIR + include ../../Makefile +endif diff --git a/keyboards/amj60/amj60.c b/keyboards/amj60/amj60.c new file mode 100644 index 0000000000..993a5917db --- /dev/null +++ b/keyboards/amj60/amj60.c @@ -0,0 +1,30 @@ +#include "amj60.h" +#include "led.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + led_init_ports(); +}; + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + matrix_scan_user(); +}; + +void led_init_ports(void) { + // * Set our LED pins as output + DDRB |= (1<<2); +} + +void led_set_kb(uint8_t usb_led) { + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // Turn capslock on + PORTB &= ~(1<<2); + } else { + // Turn capslock off + PORTB |= (1<<2); + } +} diff --git a/keyboards/amj60/amj60.h b/keyboards/amj60/amj60.h new file mode 100644 index 0000000000..a0cb473310 --- /dev/null +++ b/keyboards/amj60/amj60.h @@ -0,0 +1,153 @@ +#ifndef AMJ60_H +#define AMJ60_H + +#include "quantum.h" + +// readability +#define XXX KC_NO + +/* AMJ60 layout to the best of my knowledge matrix layout + * ,-----------------------------------------------------------. + * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d| 49| + * |-----------------------------------------------------------| + * | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d | + * |-----------------------------------------------------------| + * | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d | + * |-----------------------------------------------------------| + * | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3c | 3d | + * |-----------------------------------------------------------| + * | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d | + * `-----------------------------------------------------------' + */ +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k49,\ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ + k40, k41, k42, k45, k4a, k4b, k4c, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \ + {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d} \ +} + +/* + * ANSI + * ,-----------------------------------------------------------. + * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d | + * |-----------------------------------------------------------| + * | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d | + * |-----------------------------------------------------------| + * | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d | + * |-----------------------------------------------------------| + * | 30 | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d | + * |-----------------------------------------------------------| + * | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d | + * `-----------------------------------------------------------' + */ +#define KEYMAP_ANSI( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, \ + k40, k41, k42, k45, k4a, k4b, k4c, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d}, \ + {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, XXX, k3d}, \ + {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d} \ +} + +/* AMJ60 HHKB matrix layout + * ,------------------------------------------------------------. + * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d| 49 | + * |------------------------------------------------------------| + * | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d | + * |------------------------------------------------------------| + * | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d | + * |------------------------------------------------------------| + * | 30 | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d | 3c | + * |------------------------------------------------------------| + * | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d | + * `------------------------------------------------------------' + */ + +#define KEYMAP_HHKB( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k49, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \ + k40, k41, k42, k45, k4a, k4b, k4c, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d}, \ + {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \ + {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d} \ +} + +/* ISO + * ,-----------------------------------------------------------. + * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d | + * |-----------------------------------------------------------| + * | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d | + * |-----------------------------------------------------------| + * | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c|2d | + * |-----------------------------------------------------------| + * | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d | + * |-----------------------------------------------------------| + * | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d | + * `-----------------------------------------------------------' + */ +#define KEYMAP_ISO( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, \ + k40, k41, k42, k45, k4a, k4b, k4c, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, XXX}, \ + {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d} \ +} +/* ISO w/ split right shift key matrix layout + * ,-----------------------------------------------------------. + * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d | + * |-----------------------------------------------------------| + * | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d | + * |-----------------------------------------------------------| + * | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c|2d | + * |-----------------------------------------------------------| + * | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d | 3c | + * |-----------------------------------------------------------| + * | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d | + * `-----------------------------------------------------------' + */ +#define KEYMAP_ISO_SPLITRSHIFT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \ + k40, k41, k42, k45, k4a, k4b, k4c, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \ + {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d} \ +} + +void matrix_init_user(void); +void matrix_scan_user(void); + +#endif diff --git a/keyboards/amj60/config.h b/keyboards/amj60/config.h new file mode 100644 index 0000000000..d98e0e9f2f --- /dev/null +++ b/keyboards/amj60/config.h @@ -0,0 +1,94 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6066 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Han Chen +#define PRODUCT AMJ60 +#define DESCRIPTION qmk port of AMJ60 PCB + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +// ROWS: Top to bottom, COLS: Left to right + +#define MATRIX_ROW_PINS { F7, F6, F5, F4, D5} +#define MATRIX_COL_PINS { F1, F0, E6, C7, C6, B0, D4, B1, B7, B5, B4, D7, D6, B3} +#define UNUSED_PINS + +#define BACKLIGHT_PIN B6 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* Backlight configuration + */ +#define BACKLIGHT_LEVELS 4 + +/* Underlight configuration + */ + +#define RGB_DI_PIN E2 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 8 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/amj60/keymaps/iso_split_rshift/Makefile b/keyboards/amj60/keymaps/iso_split_rshift/Makefile new file mode 100644 index 0000000000..2969ed8aec --- /dev/null +++ b/keyboards/amj60/keymaps/iso_split_rshift/Makefile @@ -0,0 +1,23 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/amj60/keymaps/iso_split_rshift/build.sh b/keyboards/amj60/keymaps/iso_split_rshift/build.sh new file mode 100755 index 0000000000..6b4b4568f5 --- /dev/null +++ b/keyboards/amj60/keymaps/iso_split_rshift/build.sh @@ -0,0 +1,42 @@ +#!/bin/bash +# adjust for cpu +# -j 16 gave best result on a hyperthreaded quad core core i7 + +LIMIT=10 +THREADS="-j 16" +KMAP=iso_split_rshift + +echo "We need sudo later" +sudo ls 2>&1 /dev/null + +function wait_bootloader { + echo "Waiting for Bootloader..." + local STARTTIME=$(date +"%s") + local REMIND=0 + local EXEC=dfu-programmer + local TARGET=atmega32u4 + while true + do + sudo $EXEC $TARGET get > /dev/null 2>&1 + [ $? -eq 0 ] && break + ENDTIME=$(date +"%s") + DURATION=$(($ENDTIME-$STARTTIME)) + if [ $REMIND -eq 0 -a $DURATION -gt $LIMIT ] + then + echo "Did you forget to press the reset button?" + REMIND=1 + fi + sleep 1 + done +} +make clean +make KEYMAP=${KMAP} ${THREADS} +if [[ $? -eq 0 ]] +then + echo "please trigger flashing!" + wait_bootloader + sudo make KEYMAP=${KMAP} dfu ${THREADS} +else + echo "make failed" + exit 77 +fi diff --git a/keyboards/amj60/keymaps/iso_split_rshift/keymap.c b/keyboards/amj60/keymaps/iso_split_rshift/keymap.c new file mode 100644 index 0000000000..60fb0bfb0b --- /dev/null +++ b/keyboards/amj60/keymaps/iso_split_rshift/keymap.c @@ -0,0 +1,147 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "amj60.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _DEF 0 +#define _SPC 1 +#define _TAB 2 +#define _SFX 3 + +// dual-role shortcuts +#define TABDUAL LT(_TAB, KC_TAB) +#define CAPSDUAL CTL_T(KC_ESC) +#define SPACEDUAL LT(_SPC, KC_SPACE) +#define ENTERDUAL CTL_T(KC_ENT) +// arrow cluster duality bottom right corner +#define ARRLEFT ALT_T(KC_LEFT) +#define ARRDOWN GUI_T(KC_DOWN) +#define ARRUP SFT_T(KC_UP) +#define ARRRIGHT CTL_T(KC_RIGHT) +// german brackets +#define GER_CUR_L RALT(KC_7) // [ +#define GER_CUR_R RALT(KC_0) // ] +#define GER_PAR_L LSFT(KC_8) // ( +#define GER_PAR_R LSFT(KC_9) // ) +#define GER_ANG_L KC_NUBS // < +#define GER_ANG_R LSFT(KC_NUBS) // > +#define GER_BRC_L RALT(KC_8) // [ +#define GER_BRC_R RALT(KC_9) // ] + +// increase readability +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _DEF: Default Layer + * ,-----------------------------------------------------------. + * |Grv| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | Tab is Fn1 + * |-----------------------------------------------------------| + * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| Return | + * |-----------------------------------------------------------| + * |Sft | < | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn2| RShift is UP + * |-----------------------------------------------------------| + * |Ctrl|Win |Alt | Space/Fn0 |Alt |Win |Menu|RCtl| Gui Menu, RCtrl is + * `-----------------------------------------------------------' LEFT DWN RIGHT + */ + [_DEF] = KEYMAP_ISO_SPLITRSHIFT( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + TABDUAL, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + CAPSDUAL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, ENTERDUAL, \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, ARRUP, TG(_SFX), \ + KC_LCTL, KC_LGUI, KC_LALT, SPACEDUAL, KC_RALT, ARRLEFT, ARRDOWN, ARRRIGHT), + + /* Keymap 1: F-and-vim Layer, modified with Space (by holding space) + * ,-----------------------------------------------------------. + * |PrSc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete| + * |-----------------------------------------------------------| + * | |Paus| Up| [ | ] | | | | ( | ) | | | | | + * |-----------------------------------------------------------| + * | |Lft|Dwn|Rgt| | |Left|Down|Right|Up| | | PLAY | + * |-----------------------------------------------------------| + * | | | | | < | > | |M0 | | | | | Vol+ | | + * |-----------------------------------------------------------| + * | | | | |Alt |Prev|Vol-|Next| + * `-----------------------------------------------------------' + */ + [_SPC] = KEYMAP_ISO_SPLITRSHIFT( + KC_PSCR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + _______, KC_PAUS, KC_UP, GER_BRC_L, GER_BRC_R, _______, _______, GER_PAR_L, GER_PAR_R, _______, _______, _______, _______, _______, \ + _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, _______, KC_MPLY, \ + _______, _______, _______, _______, GER_ANG_L, GER_ANG_R, KC_SPACE, M(0), _______, _______, _______, _______, KC_VOLU, _______, \ + _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT), + + /* Keymap 2: Tab Layer w/ vim pageup, modified with Tab (by holding tab) + * ,-----------------------------------------------------------. + * |WAKE| | | | | | | | | | | | |Insert| TAB+GRC = WAKE + * |-----------------------------------------------------------| + * | | | | | | | | | { | } | | | | | + * |-----------------------------------------------------------| + * | | | | | | |Pos1|PgDn|PgUp|End| | |Retrn | + * |-----------------------------------------------------------| + * | | | | | | | |AF2| | | | | PgUp | | + * |-----------------------------------------------------------| + * | | | | |Alt |Pos1|PgDn|End | + * `-----------------------------------------------------------' + */ + [_TAB] = KEYMAP_ISO_SPLITRSHIFT( + KC_WAKE, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, \ + _______, _______, _______, _______, _______, _______, _______, GER_CUR_L, GER_CUR_R, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END, _______, _______, _______, KC_ENT, \ + _______, _______, _______, _______, _______, _______, _______, M(1), _______, _______, _______, _______, KC_PGUP, _______, \ + _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END), + + /* Keymap 3: Split right shift Numpad toggle Layer (by tapping the split rshift key) + * ,-----------------------------------------------------------. + * |RSET| | | | | | | 7| 8| 9| | | |Backsp | + * |-----------------------------------------------------------| + * | | | | | | | | 4 | 5 | 6 | | | | \ | + * |-----------------------------------------------------------| + * | | L | L | | | | | 1 | 2 | 3 | | | Return | + * |-----------------------------------------------------------| + * | | | L | L | L | L | L | L | | 0 | | /| Up | | All "L"s represent + * |-----------------------------------------------------------| LED controlling + * |Ctrl|Win |Alt | |Alt |Left|Down|Right| + * `-----------------------------------------------------------' + */ + [_SFX] = KEYMAP_ISO_SPLITRSHIFT( + RESET, _______, _______, _______, _______, _______, _______, KC_7, KC_8, KC_9, _______, _______, _______, KC_BSPC, \ + _______, _______, _______, _______, _______, _______, _______, KC_4, KC_5, KC_6, _______, _______, _______, KC_BSLS, \ + _______, F(2), F(3), _______, _______, _______, _______, KC_1, KC_2, KC_3, _______, _______, XXXXXXX, KC_ENT, \ + _______, F(4), F(5), F(6), F(7), F(8), F(9), _______, _______, KC_0, _______, KC_SLSH, KC_UP, _______, \ + _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT), +}; + +enum function_id { + LAUNCH, + RGBLED_TOGGLE, +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_FUNCTION(LAUNCH), + [10] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ENT), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + return (record->event.pressed ? + MACRO( D(RALT), T(SPC), U(RALT), END ) + :MACRO( END )); + break; + case 1: + return (record->event.pressed ? + MACRO( D(LALT), T(F2), U(LALT), END ) + :MACRO( END )); + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/amj60/keymaps/iso_split_rshift/readme.md b/keyboards/amj60/keymaps/iso_split_rshift/readme.md new file mode 100644 index 0000000000..2113d93e4d --- /dev/null +++ b/keyboards/amj60/keymaps/iso_split_rshift/readme.md @@ -0,0 +1,30 @@ +toneman77's custom spacefn Layout +===================== + +##Quantum MK Firmware +For the full Quantum feature list, see the parent readme.md. + +# Features +* heavily modified ISO (!) layout with split right shift key +* spaceFn +* Dual-Role keys: +* + | Original key | when tapped | when held | + | ---------------- | ------------- | ------------- | + | Space | Space | layer change | + | Caps lock | Escape | Control | + | Tab | Tab | layer change | + | Enter | Enter | Control | + +* vim-style arrow keys on hjkl (spacefn layer) +* corresponding Home/PgDn/PgUp/End on hjkl (tab layer) +* bonus arrow keys in the bottom right corner on Alt/Win/Menu/rCtrl/Shift +* more bonus arrow keys on wasd (spacefn layer) +* media keys prev/next/play/vol+/vol- (spacefn layer) +* firmware bootloader button +* additional brackets that only work in german layout due to horrible placement +in the default qwertz layout + + +### Additional Credits +* visualization of the layers [here](http://www.keyboard-layout-editor.com/#/gists/aba4e4396459ede85bc66a22cee88e48) (without the LED keys) diff --git a/keyboards/amj60/keymaps/iso_split_rshift/updatemerge.sh b/keyboards/amj60/keymaps/iso_split_rshift/updatemerge.sh new file mode 100755 index 0000000000..da5457e195 --- /dev/null +++ b/keyboards/amj60/keymaps/iso_split_rshift/updatemerge.sh @@ -0,0 +1,4 @@ +#!/bin/bash +git checkout amj60 # gets you on branch amj60 +git fetch origin # gets you up to date with origin +git merge origin/master diff --git a/keyboards/amj60/readme.md b/keyboards/amj60/readme.md new file mode 100644 index 0000000000..0896134e0c --- /dev/null +++ b/keyboards/amj60/readme.md @@ -0,0 +1,57 @@ +AMJ60 keyboard firmware +====================== +DIY/Assembled compact 60% keyboard. + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme.md](/readme.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/amj60 +folder. Once your dev env is setup, you'll be able to type `make` to generate +your .hex - you can then use `make dfu` to program your PCB once you hit the +reset button. + +Depending on which keymap you would like to use, you will have to compile +slightly differently. + +### Default +To build with the default keymap, simply run `make`. + +### Other Keymaps +Several version of keymap are available in advance but you are recommended to +define your favorite layout yourself. To define your own keymap create file +named `<name>.c` in the keymaps folder, and see keymap document (you can find +in top readme.md) and existent keymap files. + +To build the firmware binary hex file with a keymap just do `make` with +`KEYMAP` option like: +`` +$ make KEYMAP=[default|jack|<name>] +`` +Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` +folder. + +## Variations +KEYMAP macros for the following layouts are available: + +* default, for all the available, possible keys +* ANSI, for 60% ANSI keyboard +* ISO +* ISO w/ split right shift key +* HHKB + +Remark: all but "ISO w/ split right shift key" are untested and were done to the best of my knowledge. + +### Original tmk firmware +The original firmware that was used to port to qmk can be found [here](https://github.com/AMJKeyboard/AMJ60). + +## Further information +Since information and documentation for this board are sparse, (at least for non-chinese speaking ppl) here is everything that could be found + +* [geekhack discussion](https://geekhack.org/index.php?topic=53070.0) +* [chinese discussion](https://www.v2ex.com/t/161887) +* Board has [dedicated pinouts](https://i.imgur.com/D0sWhyh.jpg?1) for a bluetooth module +* has pins for external power [picture](https://i.imgur.com/00VrtIp.jpg?1). +* most information comes from [reddit](https://www.reddit.com/r/MechanicalKeyboards/comments/32oonr/gh60_pcb_for_your_custom_keyboard/) |