diff options
Diffstat (limited to 'keyboards')
-rw-r--r-- | keyboards/pilcrow/Makefile | 3 | ||||
-rw-r--r-- | keyboards/pilcrow/config.h | 162 | ||||
-rw-r--r-- | keyboards/pilcrow/keymaps/default/Makefile | 21 | ||||
-rw-r--r-- | keyboards/pilcrow/keymaps/default/config.h | 8 | ||||
-rw-r--r-- | keyboards/pilcrow/keymaps/default/keymap.c | 88 | ||||
-rw-r--r-- | keyboards/pilcrow/keymaps/default/readme.md | 1 | ||||
-rw-r--r-- | keyboards/pilcrow/pilcrow.c | 28 | ||||
-rw-r--r-- | keyboards/pilcrow/pilcrow.h | 23 | ||||
-rw-r--r-- | keyboards/pilcrow/readme.md | 28 | ||||
-rw-r--r-- | keyboards/pilcrow/rules.mk | 67 | ||||
-rw-r--r-- | keyboards/weebkeeb/Makefile | 3 | ||||
-rw-r--r-- | keyboards/weebkeeb/aek.dxf | 6486 | ||||
-rw-r--r-- | keyboards/weebkeeb/config.h | 162 | ||||
-rw-r--r-- | keyboards/weebkeeb/keymaps/default/Makefile | 21 | ||||
-rw-r--r-- | keyboards/weebkeeb/keymaps/default/config.h | 8 | ||||
-rw-r--r-- | keyboards/weebkeeb/keymaps/default/keymap.c | 119 | ||||
-rw-r--r-- | keyboards/weebkeeb/keymaps/default/readme.md | 1 | ||||
-rw-r--r-- | keyboards/weebkeeb/readme.md | 28 | ||||
-rw-r--r-- | keyboards/weebkeeb/rules.mk | 67 | ||||
-rw-r--r-- | keyboards/weebkeeb/weebkeeb.c | 28 | ||||
-rw-r--r-- | keyboards/weebkeeb/weebkeeb.h | 23 |
21 files changed, 0 insertions, 7375 deletions
diff --git a/keyboards/pilcrow/Makefile b/keyboards/pilcrow/Makefile deleted file mode 100644 index 4e2a6f00fd..0000000000 --- a/keyboards/pilcrow/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -ifndef MAKEFILE_INCLUDED - include ../../Makefile -endif
\ No newline at end of file diff --git a/keyboards/pilcrow/config.h b/keyboards/pilcrow/config.h deleted file mode 100644 index d79c1ba40c..0000000000 --- a/keyboards/pilcrow/config.h +++ /dev/null @@ -1,162 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER You -#define PRODUCT pilcrow -#define DESCRIPTION A custom keyboard - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 10 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { B2, C6, D7, E6 } -#define MATRIX_COL_PINS { B6, D1, B4, B5, D4, D0, B3, B1, F7, F6 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/pilcrow/keymaps/default/Makefile b/keyboards/pilcrow/keymaps/default/Makefile deleted file mode 100644 index f4671a9d11..0000000000 --- a/keyboards/pilcrow/keymaps/default/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif
\ No newline at end of file diff --git a/keyboards/pilcrow/keymaps/default/config.h b/keyboards/pilcrow/keymaps/default/config.h deleted file mode 100644 index df06a26206..0000000000 --- a/keyboards/pilcrow/keymaps/default/config.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here - -#endif
\ No newline at end of file diff --git a/keyboards/pilcrow/keymaps/default/keymap.c b/keyboards/pilcrow/keymaps/default/keymap.c deleted file mode 100644 index e382e4c6ad..0000000000 --- a/keyboards/pilcrow/keymaps/default/keymap.c +++ /dev/null @@ -1,88 +0,0 @@ -#include "pilcrow.h" -#define _______ KC_TRNS -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = KEYMAP( \ - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, \ - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, \ - KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, \ - KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, MT(MOD_LSFT, KC_SPC), MO(2), MO(3), KC_DEL, KC_ESC \ -), - -/* Colemak - * ,-----------------------------------------------------------------------------------. - * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | R | S | T | D | H | N | E | I | O | " | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ -[1] = KEYMAP( \ - KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, \ - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, \ - KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),KC_PIPE, S(KC_QUOT), \ - _______, _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_GRV \ -), -[2] = KEYMAP( \ - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, \ - KC_TAB, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT,KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, \ - OSM(MOD_LSFT), KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_BSLS, KC_QUOT, \ - _______, _______, _______, _______, KC_ENT, KC_ENT, _______, KC_MNXT, KC_VOLD, KC_VOLU \ -), - -/* Adjust (Lower + Raise) - * ,-----------------------------------------------------------------------------------. - * | | Reset| | | | | | | | | | Del | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | - * `-----------------------------------------------------------------------------------' - */ -[3] = KEYMAP( \ - RESET, KC_UP, _______, _______, _______, _______, _______, KC_MS_WH_DOWN, KC_MS_U, KC_MS_WH_UP, \ - KC_LEFT, KC_DOWN, KC_RIGHT, AU_ON, AU_OFF, AG_NORM, AG_SWAP, KC_MS_L,KC_MS_D, KC_MS_R, \ - RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, \ - _______, _______, _______, _______, KC_MS_BTN1, KC_MS_BTN2, _______, _______, _______, _______ \ -) -}; - -const uint16_t PROGMEM fn_actions[] = { - -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -}
\ No newline at end of file diff --git a/keyboards/pilcrow/keymaps/default/readme.md b/keyboards/pilcrow/keymaps/default/readme.md deleted file mode 100644 index 95472dfca8..0000000000 --- a/keyboards/pilcrow/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for pilcrow
\ No newline at end of file diff --git a/keyboards/pilcrow/pilcrow.c b/keyboards/pilcrow/pilcrow.c deleted file mode 100644 index c8243df7bf..0000000000 --- a/keyboards/pilcrow/pilcrow.c +++ /dev/null @@ -1,28 +0,0 @@ -#include "pilcrow.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} diff --git a/keyboards/pilcrow/pilcrow.h b/keyboards/pilcrow/pilcrow.h deleted file mode 100644 index 7138ccb3f6..0000000000 --- a/keyboards/pilcrow/pilcrow.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef PILCROW_H -#define PILCROW_H - -#include "quantum.h" - -// This a shortcut to help you visually see your layout. -// The following is an example using the Planck MIT layout -// The first section contains all of the arguements -// The second converts the arguments into a two-dimensional array -#define KEYMAP( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39 \ -) \ -{ \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19 }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39 } \ -} - -#endif diff --git a/keyboards/pilcrow/readme.md b/keyboards/pilcrow/readme.md deleted file mode 100644 index 7a7f6d2af5..0000000000 --- a/keyboards/pilcrow/readme.md +++ /dev/null @@ -1,28 +0,0 @@ -pilcrow keyboard firmware -====================== - -## Quantum MK Firmware - -For the full Quantum feature list, see [the parent readme](/). - -## Building - -Download or clone the whole firmware and navigate to the keyboards/pilcrow folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. - -Depending on which keymap you would like to use, you will have to compile slightly differently. - -### Default - -To build with the default keymap, simply run `make default`. - -### Other Keymaps - -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. - -To build the firmware binary hex file with a keymap just do `make` with a keymap like this: - -``` -$ make [default|jack|<name>] -``` - -Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/pilcrow/rules.mk b/keyboards/pilcrow/rules.mk deleted file mode 100644 index 55898147dd..0000000000 --- a/keyboards/pilcrow/rules.mk +++ /dev/null @@ -1,67 +0,0 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 diff --git a/keyboards/weebkeeb/Makefile b/keyboards/weebkeeb/Makefile deleted file mode 100644 index 4e2a6f00fd..0000000000 --- a/keyboards/weebkeeb/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -ifndef MAKEFILE_INCLUDED - include ../../Makefile -endif
\ No newline at end of file diff --git a/keyboards/weebkeeb/aek.dxf b/keyboards/weebkeeb/aek.dxf deleted file mode 100644 index cfe80946bd..0000000000 --- a/keyboards/weebkeeb/aek.dxf +++ /dev/null @@ -1,6486 +0,0 @@ -0 -SECTION -2 -ENTITIES -0 -LINE -8 -0 -10 -104.7875 -20 --89.2875 -11 -104.7875 -21 --91.6875 -0 -LINE -8 -0 -10 -104.7875 -20 --91.6875 -11 -102.3875 -21 --91.6875 -0 -LINE -8 -0 -10 -102.3875 -20 --91.6875 -11 -102.3875 -21 --89.2875 -0 -LINE -8 -0 -10 -102.3875 -20 --89.2875 -11 -104.7875 -21 --89.2875 -0 -LINE -8 -0 -10 -116.8875 -20 --89.2875 -11 -116.8875 -21 --91.6875 -0 -LINE -8 -0 -10 -116.8875 -20 --91.6875 -11 -114.4875 -21 --91.6875 -0 -LINE -8 -0 -10 -114.4875 -20 --91.6875 -11 -114.4875 -21 --89.2875 -0 -LINE -8 -0 -10 -114.4875 -20 --89.2875 -11 -116.8875 -21 --89.2875 -0 -CIRCLE -8 -0 -10 -109.6375 -20 --90.4875 -40 -3.15 -0 -LINE -8 -0 -10 -103.4875 -20 --94.3875 -11 -103.4875 -21 --99.4875 -0 -LINE -8 -0 -10 -103.4875 -20 --99.4875 -11 -100.8875 -21 --99.4875 -0 -LINE -8 -0 -10 -100.8875 -20 --99.4875 -11 -100.8875 -21 --94.3875 -0 -LINE -8 -0 -10 -100.8875 -20 --94.3875 -11 -103.4875 -21 --94.3875 -0 -LINE -8 -0 -10 -191.7875 -20 --94.3875 -11 -191.7875 -21 --99.4875 -0 -LINE -8 -0 -10 -191.7875 -20 --99.4875 -11 -194.3875 -21 --99.4875 -0 -LINE -8 -0 -10 -194.3875 -20 --99.4875 -11 -194.3875 -21 --94.3875 -0 -LINE -8 -0 -10 -194.3875 -20 --94.3875 -11 -191.7875 -21 --94.3875 -0 -LINE -8 -0 -10 -155.3875 -20 --84.0875 -11 -139.8875 -21 --84.0875 -0 -LINE -8 -0 -10 -139.8875 -20 --84.0875 -11 -139.8875 -21 --96.8875 -0 -LINE -8 -0 -10 -139.8875 -20 --96.8875 -11 -155.3875 -21 --96.8875 -0 -LINE -8 -0 -10 -155.3875 -20 --96.8875 -11 -155.3875 -21 --84.0875 -0 -LINE -8 -0 -10 -256.28125 -20 --56.2875 -11 -256.28125 -21 --61.3875 -0 -LINE -8 -0 -10 -256.28125 -20 --61.3875 -11 -253.68125 -21 --61.3875 -0 -LINE -8 -0 -10 -253.68125 -20 --61.3875 -11 -253.68125 -21 --56.2875 -0 -LINE -8 -0 -10 -253.68125 -20 --56.2875 -11 -256.28125 -21 --56.2875 -0 -LINE -8 -0 -10 -281.88125 -20 --56.2875 -11 -281.88125 -21 --61.3875 -0 -LINE -8 -0 -10 -281.88125 -20 --61.3875 -11 -284.48125 -21 --61.3875 -0 -LINE -8 -0 -10 -284.48125 -20 --61.3875 -11 -284.48125 -21 --56.2875 -0 -LINE -8 -0 -10 -284.48125 -20 --56.2875 -11 -281.88125 -21 --56.2875 -0 -LINE -8 -0 -10 -276.83125 -20 --45.9875 -11 -261.33125 -21 --45.9875 -0 -LINE -8 -0 -10 -261.33125 -20 --45.9875 -11 -261.33125 -21 --58.7875 -0 -LINE -8 -0 -10 -261.33125 -20 --58.7875 -11 -276.83125 -21 --58.7875 -0 -LINE -8 -0 -10 -276.83125 -20 --58.7875 -11 -276.83125 -21 --45.9875 -0 -LINE -8 -0 -10 -258.6625 -20 --18.1875 -11 -258.6625 -21 --23.2875 -0 -LINE -8 -0 -10 -258.6625 -20 --23.2875 -11 -256.0625 -21 --23.2875 -0 -LINE -8 -0 -10 -256.0625 -20 --23.2875 -11 -256.0625 -21 --18.1875 -0 -LINE -8 -0 -10 -256.0625 -20 --18.1875 -11 -258.6625 -21 --18.1875 -0 -LINE -8 -0 -10 -284.2625 -20 --18.1875 -11 -284.2625 -21 --23.2875 -0 -LINE -8 -0 -10 -284.2625 -20 --23.2875 -11 -286.8625 -21 --23.2875 -0 -LINE -8 -0 -10 -286.8625 -20 --23.2875 -11 -286.8625 -21 --18.1875 -0 -LINE -8 -0 -10 -286.8625 -20 --18.1875 -11 -284.2625 -21 --18.1875 -0 -LINE -8 -0 -10 -279.2125 -20 --7.8875 -11 -263.7125 -21 --7.8875 -0 -LINE -8 -0 -10 -263.7125 -20 --7.8875 -11 -263.7125 -21 --20.6875 -0 -LINE -8 -0 -10 -263.7125 -20 --20.6875 -11 -279.2125 -21 --20.6875 -0 -LINE -8 -0 -10 -279.2125 -20 --20.6875 -11 -279.2125 -21 --7.8875 -0 -LINE -8 -0 -10 -13.39375 -20 --75.3375 -11 -13.39375 -21 --80.4375 -0 -LINE -8 -0 -10 -13.39375 -20 --80.4375 -11 -10.79375 -21 --80.4375 -0 -LINE -8 -0 -10 -10.79375 -20 --80.4375 -11 -10.79375 -21 --75.3375 -0 -LINE -8 -0 -10 -10.79375 -20 --75.3375 -11 -13.39375 -21 --75.3375 -0 -LINE -8 -0 -10 -38.99375 -20 --75.3375 -11 -38.99375 -21 --80.4375 -0 -LINE -8 -0 -10 -38.99375 -20 --80.4375 -11 -41.59375 -21 --80.4375 -0 -LINE -8 -0 -10 -41.59375 -20 --80.4375 -11 -41.59375 -21 --75.3375 -0 -LINE -8 -0 -10 -41.59375 -20 --75.3375 -11 -38.99375 -21 --75.3375 -0 -LINE -8 -0 -10 -33.94375 -20 --65.0375 -11 -18.44375 -21 --65.0375 -0 -LINE -8 -0 -10 -18.44375 -20 --65.0375 -11 -18.44375 -21 --77.8375 -0 -LINE -8 -0 -10 -18.44375 -20 --77.8375 -11 -33.94375 -21 --77.8375 -0 -LINE -8 -0 -10 -33.94375 -20 --77.8375 -11 -33.94375 -21 --65.0375 -0 -LINE -8 -0 -10 -193.4875 -20 --7.8875 -11 -177.9875 -21 --7.8875 -0 -LINE -8 -0 -10 -177.9875 -20 --7.8875 -11 -177.9875 -21 --20.6875 -0 -LINE -8 -0 -10 -177.9875 -20 --20.6875 -11 -193.4875 -21 --20.6875 -0 -LINE -8 -0 -10 -193.4 |