diff options
Diffstat (limited to 'keyboards')
46 files changed, 2033 insertions, 57 deletions
diff --git a/keyboards/ergodox/keymaps/ordinary/keymap.c b/keyboards/ergodox/keymaps/ordinary/keymap.c index 302c41cc8d..5c01d96784 100644 --- a/keyboards/ergodox/keymaps/ordinary/keymap.c +++ b/keyboards/ergodox/keymaps/ordinary/keymap.c @@ -1,5 +1,6 @@ #include "ergodox.h" #include "led.h" +#include "mousekey.h" #include "debug.h" #include "action_layer.h" #include "action_util.h" diff --git a/keyboards/ergodox/keymaps/robot_test_layout/keymap.c b/keyboards/ergodox/keymaps/robot_test_layout/keymap.c index 480be177f0..e9e2597d7e 100644 --- a/keyboards/ergodox/keymaps/robot_test_layout/keymap.c +++ b/keyboards/ergodox/keymaps/robot_test_layout/keymap.c @@ -68,7 +68,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { case RGB_FF0000: if (record->event.pressed) { #ifdef RGBLIGHT_ENABLE - EZ_RGB(0xff0000); + EZ_RGB(0xff0000UL); register_code(KC_1); unregister_code(KC_1); #endif } @@ -77,7 +77,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { case RGB_00FF00: if (record->event.pressed) { #ifdef RGBLIGHT_ENABLE - EZ_RGB(0x00ff00); + EZ_RGB(0x00ff00UL); register_code(KC_2); unregister_code(KC_2); #endif } @@ -86,7 +86,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { case RGB_0000FF: if (record->event.pressed) { #ifdef RGBLIGHT_ENABLE - EZ_RGB(0x0000ff); + EZ_RGB(0x0000ffUL); register_code(KC_3); unregister_code(KC_3); #endif } @@ -95,7 +95,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { case RGB_FFFFFF: if (record->event.pressed) { #ifdef RGBLIGHT_ENABLE - EZ_RGB(0xffffff); + EZ_RGB(0xffffffUL); register_code(KC_4); unregister_code(KC_4); #endif } diff --git a/keyboards/handwired/onekey/keymaps/default/keymap.c b/keyboards/handwired/onekey/keymaps/default/keymap.c index 756c4f51ed..10c486718d 100644 --- a/keyboards/handwired/onekey/keymaps/default/keymap.c +++ b/keyboards/handwired/onekey/keymaps/default/keymap.c @@ -1,5 +1,5 @@ #include "onekey.h" const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - { KC_A } + {{ KC_A }} }; diff --git a/keyboards/handwired/reddot/Makefile b/keyboards/handwired/reddot/Makefile new file mode 100755 index 0000000000..191c6bb664 --- /dev/null +++ b/keyboards/handwired/reddot/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/handwired/reddot/config.h b/keyboards/handwired/reddot/config.h new file mode 100755 index 0000000000..15f1142971 --- /dev/null +++ b/keyboards/handwired/reddot/config.h @@ -0,0 +1,162 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER upils +#define PRODUCT reddot +#define DESCRIPTION A custom keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 19 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { B0, B1, B2, B3, E6 } +#define MATRIX_COL_PINS { B7, D0, D1, D2, D3, C6, C7, D5, D4, D7, B4, B5, B6, F7, F6, F5, F4, F1, F0 } +#define UNUSED_PINS + + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/handwired/reddot/keymaps/default/keymap.c b/keyboards/handwired/reddot/keymaps/default/keymap.c new file mode 100755 index 0000000000..44ee2ce510 --- /dev/null +++ b/keyboards/handwired/reddot/keymaps/default/keymap.c @@ -0,0 +1,29 @@ +#include "reddot.h" +#include "../../../../../quantum/keymap_extras/keymap_french.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[0] = KEYMAP( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TAB, KC_CAPS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_FN0, KC_KP_SLASH, KC_KP_ASTERISK, KC_KP_MINUS,\ + KC_LALT, FR_AMP, FR_EACU, FR_QUOT, FR_APOS, FR_LPRN, KC_BSPACE, KC_DELETE, FR_MINS, FR_EGRV, FR_UNDS, FR_CCED, FR_AGRV, FR_RPRN, FR_EQL, KC_INSERT, KC_HOME, KC_PGUP,\ + KC_LGUI, FR_A, FR_Z, KC_E, KC_R, KC_T, KC_LSFT, KC_ENT, KC_Y, KC_U, KC_I, KC_O, KC_P, FR_CIRC, FR_DLR, KC_DELETE, KC_END, KC_PGDOWN, KC_KP_PLUS,\ + KC_LCTL, FR_Q, KC_S, KC_D, KC_F, KC_G, KC_ENT, KC_H, KC_J, KC_K, KC_L, FR_M, FR_UGRV, FR_ASTR, KC_KP_1, KC_UP, KC_KP_3,\ + FR_LESS, FR_W, KC_X, KC_C, KC_V, KC_B, KC_SPACE, KC_SPACE, KC_N, FR_COMM, FR_SCLN, FR_COLN, FR_EXLM, NO_ALGR, KC_LEFT, KC_DOWN, KC_RIGHT, KC_KP_ENTER), + + [1] = KEYMAP( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TAB, KC_CAPS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_FN0, KC_KP_SLASH, KC_KP_ASTERISK, KC_KP_MINUS,\ + KC_LALT, FR_AMP, FR_EACU, FR_QUOT, FR_APOS, FR_LPRN, KC_BSPACE, KC_DELETE, FR_MINS, FR_EGRV, FR_UNDS, FR_CCED, FR_AGRV, FR_RPRN, FR_EQL, KC_7, KC_8, KC_9,\ + KC_LGUI, FR_A, FR_Z, KC_E, KC_R, KC_T, KC_LSFT, KC_ENT, KC_Y, KC_U, KC_I, KC_O, KC_P, FR_CIRC, FR_DLR, KC_4, KC_5, KC_6, KC_KP_PLUS,\ + KC_LCTL, FR_Q, KC_S, KC_D, KC_F, KC_G, KC_ENT, KC_H, KC_J, KC_K, KC_L, FR_M, FR_UGRV, FR_ASTR, KC_1, KC_2, KC_3,\ + FR_LESS, FR_W, KC_X, KC_C, KC_V, KC_B, KC_SPACE, KC_SPACE, KC_N, FR_COMM, FR_SCLN, FR_COLN, FR_EXLM, NO_ALGR, KC_LEFT, KC_DOWN, KC_RIGHT, KC_KP_ENTER), +}; + + +const uint16_t PROGMEM fn_actions[] = { + ACTION_LAYER_TOGGLE(1), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + return MACRO_NONE; +}; + diff --git a/keyboards/handwired/reddot/keymaps/default/readme.md b/keyboards/handwired/reddot/keymaps/default/readme.md new file mode 100755 index 0000000000..f04833c3e0 --- /dev/null +++ b/keyboards/handwired/reddot/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for handwired/reddot diff --git a/keyboards/handwired/reddot/readme.md b/keyboards/handwired/reddot/readme.md new file mode 100755 index 0000000000..11bcba54ad --- /dev/null +++ b/keyboards/handwired/reddot/readme.md @@ -0,0 +1,24 @@ +## RedDot Specific Info ## + + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent README.md](/README.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboard/reddot folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default +To build with the default keymap, simply run `make`. + +### Other Keymaps +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` and see keymap document (you can find in top README.md) and existent keymap files. + +To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +``` +$ make KEYMAP=[default|jack|<name>] +``` +Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/handwired/reddot/reddot.c b/keyboards/handwired/reddot/reddot.c new file mode 100755 index 0000000000..4e1efc06ce --- /dev/null +++ b/keyboards/handwired/reddot/reddot.c @@ -0,0 +1,7 @@ +#include "reddot.h" + +void matrix_init_kb(void) { + + matrix_init_user(); +} + diff --git a/keyboards/handwired/reddot/reddot.h b/keyboards/handwired/reddot/reddot.h new file mode 100755 index 0000000000..f0c4be5571 --- /dev/null +++ b/keyboards/handwired/reddot/reddot.h @@ -0,0 +1,20 @@ +#ifndef REDDOT_H +#define REDDOT_H + +#include "quantum.h" + +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k10, k11, k12, k13, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k30, k31, k32, \ + k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k50, k51, k52, k53, \ + k60, k61, k62, k63, k64, k65, k66, k68, k69, k6A, k6B, k6C, k6D, k6E, k70, k71, k72, \ + k80, k81, k82, k83, k84, k85, k86, k88, k89, k8A, k8B, k8C, k8D, k8E, k90, k91, k92, k93\ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k10, k11, k12, k13 }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k30, k31, k32, KC_NO }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k50, k51, k52, k53 }, \ + { k60, k61, k62, k63, k64, k65, k66, KC_NO, k68, k69, k6A, k6B, k6C, k6D, k6E, k70, k71, k72, KC_NO }, \ + { k80, k81, k82, k83, k84, k85, k86, KC_NO, k88, k89, k8A, k8B, k8C, k8D, k8E, k90, k91, k92, k93 } \ +} + +#endif diff --git a/keyboards/handwired/reddot/rules.mk b/keyboards/handwired/reddot/rules.mk new file mode 100755 index 0000000000..9a4409fe66 --- /dev/null +++ b/keyboards/handwired/reddot/rules.mk @@ -0,0 +1,88 @@ + +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# for avr upload +USB ?= /dev/cu.usbmodem1421 +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + + +ifdef TEENSY2 + OPT_DEFS += -DATREUS_TEENSY2 + ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex +else + OPT_DEFS += -DATREUS_ASTAR + OPT_DEFS += -DCATERINA_BOOTLOADER + ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ + avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) +endif +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# MCU name + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../../Makefile +endif + +upload: build + $(ATREUS_UPLOAD_COMMAND) + diff --git a/keyboards/lets_split/Makefile b/keyboards/lets_split/Makefile index 4e2a6f00fd..f5c87d4d65 100644 --- a/keyboards/lets_split/Makefile +++ b/keyboards/lets_split/Makefile @@ -1,3 +1,5 @@ +SUBPROJECT_DEFAULT = rev2 + ifndef MAKEFILE_INCLUDED include ../../Makefile -endif
\ No newline at end of file +endif diff --git a/keyboards/lets_split/config.h b/keyboards/lets_split/config.h index 7df0c57527..008fb09789 100644 --- a/keyboards/lets_split/config.h +++ b/keyboards/lets_split/config.h @@ -26,4 +26,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #ifdef SUBPROJECT_rev2 #include "rev2/config.h" #endif +#ifdef SUBPROJECT_rev2fliphalf + #include "../../rev2fliphalf/config.h" +#endif #endif diff --git a/keyboards/lets_split/eeprom-lefthand.eep b/keyboards/lets_split/eeprom-lefthand.eep index a92200b124..b9666a74c0 100644 --- a/keyboards/lets_split/eeprom-lefthand.eep +++ b/keyboards/lets_split/eeprom-lefthand.eep @@ -1,2 +1,2 @@ -:080000000000000000000001F7
+:0B0000000000000000000000000001F4
:00000001FF
diff --git a/keyboards/lets_split/eeprom-righthand.eep b/keyboards/lets_split/eeprom-righthand.eep index 91a6831704..94cc5be7fc 100644 --- a/keyboards/lets_split/eeprom-righthand.eep +++ b/keyboards/lets_split/eeprom-righthand.eep @@ -1,2 +1,2 @@ -:080000000000000000000000F8
+:0B0000000000000000000000000000F5
:00000001FF
diff --git a/keyboards/lets_split/keymaps/i2c/config.h b/keyboards/lets_split/keymaps/i2c/config.h index efe8bb0f2b..013542731e 100644 --- a/keyboards/lets_split/keymaps/i2c/config.h +++ b/keyboards/lets_split/keymaps/i2c/config.h @@ -16,12 +16,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #define USE_I2C -#define I2C_MASTER_LEFT -// #define I2C_MASTER_RIGHT +#define MASTER_LEFT +// #define _MASTER_RIGHT +// #define EE_HANDS #ifdef SUBPROJECT_rev1 #include "../../rev1/config.h" #endif #ifdef SUBPROJECT_rev2 #include "../../rev2/config.h" -#endif
\ No newline at end of file +#endif +#ifdef SUBPROJECT_rev2fliphalf + #include "../../rev2fliphalf/config.h" +#endif diff --git a/keyboards/lets_split/keymaps/serial/config.h b/keyboards/lets_split/keymaps/serial/config.h index cd766cc4f1..ba271d1ac6 100644 --- a/keyboards/lets_split/keymaps/serial/config.h +++ b/keyboards/lets_split/keymaps/serial/config.h @@ -18,7 +18,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define USE_SERIAL -#define EE_HANDS +#define MASTER_LEFT +// #define _MASTER_RIGHT +// #define EE_HANDS #ifdef SUBPROJECT_rev1 @@ -26,4 +28,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #endif #ifdef SUBPROJECT_rev2 #include "../../rev2/config.h" -#endif
\ No newline at end of file +#endif +#ifdef SUBPROJECT_rev2fliphalf + #include "../../rev2fliphalf/config.h" +#endif diff --git a/keyboards/lets_split/lets_split.h b/keyboards/lets_split/lets_split.h index 2cdfb061f2..0de308c7a9 100644 --- a/keyboards/lets_split/lets_split.h +++ b/keyboards/lets_split/lets_split.h @@ -7,6 +7,9 @@ #ifdef SUBPROJECT_rev2 #include "rev2.h" #endif +#ifdef SUBPROJECT_rev2fliphalf + #include "rev2fliphalf.h" +#endif #include "quantum.h" diff --git a/keyboards/lets_split/readme.md b/keyboards/lets_split/readme.md index 6e296737a2..ecce3f4152 100644 --- a/keyboards/lets_split/readme.md +++ b/keyboards/lets_split/readme.md @@ -6,9 +6,45 @@ This readme and most of the code are from https://github.com/ahtn/tmk_keyboard/ Split keyboard firmware for Arduino Pro Micro or other ATmega32u4 based boards. + +## First Time Setup + +Download or clone the whole firmware and navigate to the keyboards/lets_split directory. Once your dev env is setup, you'll be able to generate the default .hex using: + +``` +$ make rev2 +``` + +You will see a lot of output and if everything worked correctly you will see the built hex files: + +``` +lets_split_rev2_serial.hex +lets_split_rev2_i2c.hex +``` + +If you would like to use one of the alternative keymaps, or create your own, copy one of the existing [keymaps](keymaps/) and run make like so: + + +``` +$ make rev2-YOUR_KEYMAP_NAME +``` + +If everything worked correctly you will see a file: + +``` +lets_split_rev2_YOUR_KEYMAP_NAME.hex +``` + +For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/readme.md##customizing-your-keymap) in the main readme.md. + +### Let's split 1.0 +If you have a first generation Let's Split you will need to use the revision 1 code. To do so, use `rev1` in all your commands instead. + Features -------- +For the full Quantum Mechanical Keyboard feature list, see [the parent readme.md](/readme.md). + Some features supported by the firmware: * Either half can connect to the computer via USB, or both halves can be used @@ -62,7 +98,7 @@ unnecessary in simple use cases. Notes on Software Configuration ------------------------------- -Configuring the firmware is similar to any other TMK project. One thing +Configuring the firmware is similar to any other QMK project. One thing |