diff options
Diffstat (limited to 'keyboards')
26 files changed, 1008 insertions, 24 deletions
diff --git a/keyboards/matrix/m12og/readme.md b/keyboards/matrix/m12og/readme.md index 24fcbb5d8d..c0562cec67 100644 --- a/keyboards/matrix/m12og/readme.md +++ b/keyboards/matrix/m12og/readme.md @@ -1,16 +1,12 @@ # Matrix 8XV1.2 OG keyboard - + -This was the Matrix 8XV1.2 OG keyboard made by the Matrix team. Note: this firmware only support ISO/ANSI version, -and DO NOT support the 8XV1.2 OG ANSI only version. +This was the Matrix 8XV1.2 OG keyboard made by the Matrix team. -* Keyboard Maintainer: [astro](https://github.com/yulei) -* Hardware Supported: Matrix 8XV1.2 OG (ISO/ANSI) keyboard -* Hardware Availability: Matrix Lab +There are two versions of the PCB available. -Make example for this keyboard (after setting up your build environment): - - make matrix/m12og:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). +|Version|Features | +|-------|-----------------------------------------------------| +|rev1 |Green/Yellow PCB / ARM STM32 controller / ANSI only | +|rev2 |White PCB / Atmel AVR controller / ANSI/ISO | diff --git a/keyboards/matrix/m12og/rev1/boards/m12og_v1/board.c b/keyboards/matrix/m12og/rev1/boards/m12og_v1/board.c new file mode 100644 index 0000000000..b1fc61c557 --- /dev/null +++ b/keyboards/matrix/m12og/rev1/boards/m12og_v1/board.c @@ -0,0 +1,50 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include <hal.h> + +/** + * @brief PAL setup. + * @details Digital I/O ports static configuration as defined in @p board.h. + * This variable is used by the HAL when initializing the PAL driver. + */ +#if HAL_USE_PAL || defined(__DOXYGEN__) +const PALConfig pal_default_config = +{ + {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH}, + {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH}, + {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH}, + {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH}, + {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH}, +}; +#endif + +/* + * Early initialization code. + * This initialization must be performed just after stack setup and before + * any other initialization. + */ +void __early_init(void) { + stm32_clock_init(); + +} + +/* + * Board-specific initialization code. + */ +void boardInit(void) { + +} diff --git a/keyboards/matrix/m12og/rev1/boards/m12og_v1/board.h b/keyboards/matrix/m12og/rev1/boards/m12og_v1/board.h new file mode 100644 index 0000000000..685deb4160 --- /dev/null +++ b/keyboards/matrix/m12og/rev1/boards/m12og_v1/board.h @@ -0,0 +1,142 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +/* + * Board identifier. + */ +#define BOARD_M12OG +#define BOARD_NAME "Matrix 12og keyboard" + +/* + * Board frequencies. + */ +#define STM32_LSECLK 32768 +#define STM32_HSECLK 8000000 + +/* + * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h. + * + * Only xB (128KB Flash) is defined, but it's identical to the + * x8 version (64KB Flash) except for the Flash region size in the + * linker script. For x8 parts use xB here and change to the x8 linker + * script in the project Makefile. + */ +#define STM32F103xB + +/* + * IO pins assignments + * + * numbering is sorted by onboard/connectors, as from the schematics in + * http://www.vcc-gnd.com/read.php?tid=369 + */ + +/* on-board */ +#define GPIOA_USBDM 11 // pin 8 +#define GPIOA_USBDP 12 // pin 9 + +#define GPIOC_OSC32_IN 14 +#define GPIOC_OSC32_OUT 15 + +/* + * I/O ports initial setup, this configuration is established soon after reset + * in the initialization code. + * + * The digits have the following meaning: + * 0 - Analog input. + * 1 - Push Pull output 10MHz. + * 2 - Push Pull output 2MHz. + * 3 - Push Pull output 50MHz. + * 4 - Digital input. + * 5 - Open Drain output 10MHz. + * 6 - Open Drain output 2MHz. + * 7 - Open Drain output 50MHz. + * 8 - Digital input with PullUp or PullDown resistor depending on ODR. + * 9 - Alternate Push Pull output 10MHz. + * A - Alternate Push Pull output 2MHz. + * B - Alternate Push Pull output 50MHz. + * C - Reserved. + * D - Alternate Open Drain output 10MHz. + * E - Alternate Open Drain output 2MHz. + * F - Alternate Open Drain output 50MHz. + * Please refer to the STM32 Reference Manual for details. + */ + +/* + * Port A setup. + * Everything input with pull-up except: + */ +#define VAL_GPIOACRL 0x88888888 /* PA7...PA0 */ +#define VAL_GPIOACRH 0x88888888 /* PA15...PA8 */ +#define VAL_GPIOAODR 0xFFFFFFFF + +/* + * Port B setup. + * Everything input with pull-up except: + */ +#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */ +#define VAL_GPIOBCRH 0x88888888 /* PB15...PB8 */ +#define VAL_GPIOBODR 0xFFFFFFFF + +/* + * Port C setup. + * Everything input with pull-up except: + */ +#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */ +#define VAL_GPIOCCRH 0x88888888 /* PC15...PC8 */ +#define VAL_GPIOCODR 0xFFFFFFFF + +/* + * Port D setup. + * Everything input with pull-up except: + * PD0 - Normal input (XTAL). + * PD1 - Normal input (XTAL). + */ +#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */ +#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */ +#define VAL_GPIODODR 0xFFFFFFFF + +/* + * Port E setup. + * Everything input with pull-up except: + */ +#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */ +#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */ +#define VAL_GPIOEODR 0xFFFFFFFF + +/* + * USB bus activation macro, required by the USB driver. + */ +#define usb_lld_connect_bus(usbp) /* always connected */ + +/* + * USB bus de-activation macro, required by the USB driver. + */ +#define usb_lld_disconnect_bus(usbp) /* always connected */ + +#if !defined(_FROM_ASM_) +#ifdef __cplusplus +extern "C" { +#endif + void boardInit(void); +#ifdef __cplusplus +} +#endif +#endif /* _FROM_ASM_ */ + +#endif /* _BOARD_H_ */ diff --git a/keyboards/matrix/m12og/rev1/boards/m12og_v1/board.mk b/keyboards/matrix/m12og/rev1/boards/m12og_v1/board.mk new file mode 100644 index 0000000000..48f620db1c --- /dev/null +++ b/keyboards/matrix/m12og/rev1/boards/m12og_v1/board.mk @@ -0,0 +1,5 @@ +# List of all the board related files. +BOARDSRC = $(BOARD_PATH)/boards/m12og_v1/board.c + +# Required include directories +BOARDINC = $(BOARD_PATH)/boards/m12og_v1 diff --git a/keyboards/matrix/m12og/rev1/chconf.h b/keyboards/matrix/m12og/rev1/chconf.h new file mode 100644 index 0000000000..5109645a37 --- /dev/null +++ b/keyboards/matrix/m12og/rev1/chconf.h @@ -0,0 +1,40 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/matrix/m12og/rev1/chconf.h -r platforms/chibios/common/configs/chconf.h` + */ + +#pragma once + +#define CH_CFG_ST_TIMEDELTA 0 + +#define CH_CFG_USE_REGISTRY TRUE + +#define CH_CFG_USE_WAITEXIT TRUE + +#define CH_CFG_USE_CONDVARS TRUE + +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE + +#define CH_CFG_USE_MESSAGES TRUE + +#define CH_CFG_USE_MAILBOXES TRUE + +#define CH_CFG_USE_HEAP TRUE + +#include_next <chconf.h> diff --git a/keyboards/matrix/m12og/rev1/config.h b/keyboards/matrix/m12og/rev1/config.h new file mode 100644 index 0000000000..204ece1617 --- /dev/null +++ b/keyboards/matrix/m12og/rev1/config.h @@ -0,0 +1,54 @@ +/* +Copyright 2021 kb-elmo<mail@elmo.space> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4D58 +#define PRODUCT_ID 0x0369 +#define DEVICE_VER 0x0001 +#define MANUFACTURER matrix +#define PRODUCT m12og_v1 + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 16 + +/* Keyboard Matrix Assignments */ + +#define MATRIX_ROW_PINS { A0, A1, A2, A3, A4, A5 } +#define MATRIX_COL_PINS { C0, C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15 } + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Status LEDs */ +#define LED_CAPS_LOCK_PIN B6 +#define LED_SCROLL_LOCK_PIN B5 + +/* RGB */ +#define RGB_DI_PIN B8 +#define RGBLIGHT_ANIMATIONS + +#define RGBLED_NUM 16 +#define RGBLIGHT_SLEEP +#define WS2812_BYTE_ORDER WS2812_BYTE_ORDER_RGB + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 diff --git a/keyboards/matrix/m12og/rev1/halconf.h b/keyboards/matrix/m12og/rev1/halconf.h new file mode 100644 index 0000000000..20ce9bc3c0 --- /dev/null +++ b/keyboards/matrix/m12og/rev1/halconf.h @@ -0,0 +1,26 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/matrix/m12og/rev1/halconf.h -r platforms/chibios/common/configs/halconf.h` + */ + +#pragma once + +#define HAL_USE_PWM TRUE + +#include_next <halconf.h> diff --git a/keyboards/matrix/m12og/rev1/info.json b/keyboards/matrix/m12og/rev1/info.json new file mode 100644 index 0000000000..4bf8ed9d3f --- /dev/null +++ b/keyboards/matrix/m12og/rev1/info.json @@ -0,0 +1,99 @@ +{ + "keyboard_name": "Matrix 8XV1.2 OG rev1", + "url": "", + "maintainer": "kb-elmo", + "width": 18.25, + "height": 6.5, + "layouts": { + "LAYOUT_all": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + {"label":"~", "x":0, "y":1.5}, + {"label":"!", "x":1, "y":1.5}, + {"label":"@", "x":2, "y":1.5}, + {"label":"#", "x":3, "y":1.5}, + {"label":"$", "x":4, "y":1.5}, + {"label":"%", "x":5, "y":1.5}, + {"label":"^", "x":6, "y":1.5}, + {"label":"&", "x":7, "y":1.5}, + {"label":"*", "x":8, "y":1.5}, + {"label":"(", "x":9, "y":1.5}, + {"label":")", "x":10, "y":1.5}, + {"label":"_", "x":11, "y":1.5}, + {"label":"+", "x":12, "y":1.5}, + {"label":"Backspace", "x":13, "y":1.5, "w":2}, + {"label":"Insert", "x":15.25, "y":1.5}, + {"label":"Home", "x":16.25, "y":1.5}, + {"label":"PgUp", "x":17.25, "y":1.5}, + {"label":"Tab", "x":0, "y":2.5, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.5}, + {"label":"W", "x":2.5, "y":2.5}, + {"label":"E", "x":3.5, "y":2.5}, + {"label":"R", "x":4.5, "y":2.5}, + {"label":"T", "x":5.5, "y":2.5}, + {"label":"Y", "x":6.5, "y":2.5}, + {"label":"U", "x":7.5, "y":2.5}, + {"label":"I", "x":8.5, "y":2.5}, + {"label":"O", "x":9.5, "y":2.5}, + {"label":"P", "x":10.5, "y":2.5}, + {"label":"{", "x":11.5, "y":2.5}, + {"label":"}", "x":12.5, "y":2.5}, + {"label":"|", "x":13.5, "y":2.5, "w":1.5}, + {"label":"Delete", "x":15.25, "y":2.5}, + {"label":"End", "x":16.25, "y":2.5}, + {"label":"PgDn", "x":17.25, "y":2.5}, + {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, + {"label":"A", "x":1.75, "y":3.5}, + {"label":"S", "x":2.75, "y":3.5}, + {"label":"D", "x":3.75, "y":3.5}, + {"label":"F", "x":4.75, "y":3.5}, + {"label":"G", "x":5.75, "y":3.5}, + {"label":"H", "x":6.75, "y":3.5}, + {"label":"J", "x":7.75, "y":3.5}, + {"label":"K", "x":8.75, "y":3.5}, + {"label":"L", "x":9.75, "y":3.5}, + {"label":":", "x":10.75, "y":3.5}, + {"label":"\"", "x":11.75, "y":3.5}, + {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, + {"label":"Shift", "x":0, "y":4.5, "w":2.25}, + {"label":"Z", "x":2.25, "y":4.5}, + {"label":"X", "x":3.25, "y":4.5}, + {"label":"C", "x":4.25, "y":4.5}, + {"label":"V", "x":5.25, "y":4.5}, + {"label":"B", "x":6.25, "y":4.5}, + {"label":"N", "x":7.25, "y":4.5}, + {"label":"M", "x":8.25, "y":4.5}, + {"label":"<", "x":9.25, "y":4.5}, + {"label":">", "x":10.25, "y":4.5}, + {"label":"?", "x":11.25, "y":4.5}, + {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, + {"label":"\u2191", "x":16.25, "y":4.5}, + {"label":"Ctrl", "x":0, "y":5.5, "w":1.5}, + {"label":"Win", "x":1.5, "y":5.5}, + {"label":"Alt", "x":2.5, "y":5.5, "w":1.5}, + {"x":4, "y":5.5, "w":7}, + {"label":"Win", "x":11, "y":5.5, "w":1.5}, + {"label":"Menu", "x":12.5, "y":5.5}, + {"label":"Ctrl", "x":13.5, "y":5.5, "w":1.5}, + {"label":"\u2190", "x":15.25, "y":5.5}, + {"label":"\u2193", "x":16.25, "y":5.5}, + {"label":"\u2192", "x":17.25, "y":5.5} + ] + } + } +} diff --git a/keyboards/matrix/m12og/rev1/keymaps/default/keymap.c b/keyboards/matrix/m12og/rev1/keymaps/default/keymap.c new file mode 100644 index 0000000000..311725c15d --- /dev/null +++ b/keyboards/matrix/m12og/rev1/keymaps/default/keymap.c @@ -0,0 +1,50 @@ +/* Copyright 2021 kb-elmo<mail@elmo.space> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_all( + KC_TRNS, RGB_TOG, RGB_MOD, RGB_RMOD, KC_TRNS, RGB_VAI, RGB_VAD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_MPRV, KC_MNXT, KC_MPLY, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; + +bool led_update_user(led_t led_state) { + static uint8_t caps_state = 0; + if (caps_state != led_state.caps_lock) { + if (led_state.caps_lock) { + rgblight_sethsv_noeeprom_cyan(); + rgblight_mode_noeeprom(1); + } else { + rgblight_sethsv_noeeprom(5, 255, 255); + rgblight_mode_noeeprom(37); + } + caps_state = led_state.caps_lock; + } + return true; +}; diff --git a/keyboards/matrix/m12og/rev1/ld/m12og_v1.ld b/keyboards/matrix/m12og/rev1/ld/m12og_v1.ld new file mode 100644 index 0000000000..ad04d6d170 --- /dev/null +++ b/keyboards/matrix/m12og/rev1/ld/m12og_v1.ld @@ -0,0 +1,85 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F103xB memory setup for use with the matrix 12og mass-storage device bootloader. + */ +MEMORY +{ + flash0 : org = 0x08018000, len = 128k - 0x18000 + flash1 : org = 0x00000000, len = 0 + flash2 : org = 0x00000000, len = 0 + flash3 : org = 0x00000000, len = 0 + flash4 : org = 0x00000000, len = 0 + flash5 : org = 0x00000000, len = 0 + flash6 : org = 0x00000000, len = 0 + flash7 : org = 0x00000000, len = 0 + ram0 : org = 0x20000000, len = 20k + ram1 : org = 0x00000000, len = 0 + ram2 : org = 0x00000000, len = 0 + ram3 : org = 0x00000000, len = 0 + ram4 : org = 0x00000000, len = 0 + ram5 : org = 0x00000000, len = 0 + ram6 : org = 0x00000000, len = 0 + ram7 : org = 0x00000000, len = 0 +} + +/* For each data/text section two region are defined, a virtual region + and a load region (_LMA suffix).*/ + +/* Flash region to be used for exception vectors.*/ +REGION_ALIAS("VECTORS_FLASH", flash0); +REGION_ALIAS("VECTORS_FLASH_LMA", flash0); + +/* Flash region to be used for constructors and destructors.*/ +REGION_ALIAS("XTORS_FLASH", flash0); +REGION_ALIAS("XTORS_FLASH_LMA", flash0); + +/* Flash region to be used for code text.*/ +REGION_ALIAS("TEXT_FLASH", flash0); +REGION_ALIAS("TEXT_FLASH_LMA", flash0); + +/* Flash region to be used for read only data.*/ +REGION_ALIAS("RODATA_FLASH", flash0); +REGION_ALIAS("RODATA_FLASH_LMA", flash0); + +/* Flash region to be used for various.*/ +REGION_ALIAS("VARIOUS_FLASH", flash0); +REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); + +/* Flash region to be used for RAM(n) initialization data.*/ +REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); + +/* RAM region to be used for Main stack. This stack accommodates the processing + of all exceptions and interrupts.*/ +REGION_ALIAS("MAIN_STACK_RAM", ram0); + +/* RAM region to be used for the process stack. This is the stack used by + the main() function.*/ +REGION_ALIAS("PROCESS_STACK_RAM", ram0); + +/* RAM region to be used for data segment.*/ +REGION_ALIAS("DATA_RAM", ram0); +REGION_ALIAS("DATA_RAM_LMA", flash0); + +/* RAM region to be used for BSS segment.*/ +REGION_ALIAS("BSS_RAM", ram0); + +/* RAM region to be used for the default heap.*/ +REGION_ALIAS("HEAP_RAM", ram0); + +/* Generic rules inclusion.*/ +INCLUDE rules.ld diff --git a/keyboards/matrix/m12og/rev1/matrix.c b/keyboards/matrix/m12og/rev1/matrix.c new file mode 100644 index 0000000000..9c36153da1 --- /dev/null +++ b/keyboards/matrix/m12og/rev1/matrix.c @@ -0,0 +1,96 @@ +/* Copyright 2021 xyzz + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <stdint.h> +#include <stdbool.h> +#include "util.h" +#include "matrix.h" +#include "debounce.h" +#include "quantum.h" + +static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; +static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; + +static void select_col(uint8_t col) { + setPinOutput(col_pins[col]); + writePinHigh(col_pins[col]); +} + +static void unselect_col(uint8_t col) { setPinInputLow(col_pins[col]); } + +static void unselect_cols(void) { + for (uint8_t x = 0; x < MATRIX_COLS; x++) { + setPinInputLow(col_pins[x]); + } +} + +static void init_pins(void) { + unselect_cols(); + for (uint8_t x = 0; x < MATRIX_ROWS; x++) { + setPinInputLow(row_pins[x]); + } +} + +static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) { + bool matrix_changed = false; + + // Select col and wait for col selecton to stabilize + select_col(current_col); + matrix_io_delay(); + + // For each row... + for (uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++) { + // Store last value of row prior to reading + matrix_row_t last_row_value = current_matrix[row_index]; + matrix_row_t current_row_value = last_row_value; + + // Check row pin state + if (readPin(row_pins[row_index]) != 0) { + // Pin LO, set col bit + current_row_value |= (MATRIX_ROW_SHIFTER << current_col); + } else { + // Pin HI, clear col bit + current_row_value &= ~(MATRIX_ROW_SHIFTER << current_col); + } + + // Determine if the matrix changed state + if ((last_row_value != current_row_value)) { + matrix_changed |= true; + current_matrix[row_index] = current_row_value; + } + } + + // Unselect col + unselect_col(current_col); + + return matrix_changed; +} + +void matrix_init_custom(void) { + // initialize key pins + init_pins(); +} + +uint8_t matrix_scan_custom(matrix_row_t current_matrix[]) { + bool changed = false; + + // Set col, read rows + for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { + changed |= read_rows_on_col(current_matrix, current_col); + } + + return (uint8_t)changed; +} diff --git a/keyboards/matrix/m12og/rev1/mcuconf.h b/keyboards/matrix/m12og/rev1/mcuconf.h new file mode 100644 index 0000000000..a645d3c5d5 --- /dev/null +++ b/keyboards/matrix/m12og/rev1/mcuconf.h @@ -0,0 +1,209 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define STM32F103_MCUCONF + +/* + * STM32F103 drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED FALSE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_RTCSEL STM32_RTCSEL_HSEDIV +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC1_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_1 |