diff options
Diffstat (limited to 'keyboards')
58 files changed, 59 insertions, 72 deletions
diff --git a/keyboards/ai/readme.md b/keyboards/ai/readme.md index 670996640f..f61e4933ac 100644 --- a/keyboards/ai/readme.md +++ b/keyboards/ai/readme.md @@ -31,4 +31,4 @@ Enter the bootloader in 3 ways: - **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard - **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -- **Keycode in layout**: Press the key mapped to `RESET` if it is available +- **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/aidansmithdotdev/fine40/readme.md b/keyboards/aidansmithdotdev/fine40/readme.md index ad3eba7c5c..19d23fb914 100644 --- a/keyboards/aidansmithdotdev/fine40/readme.md +++ b/keyboards/aidansmithdotdev/fine40/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (top left key) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/at_at/660m/config.h b/keyboards/at_at/660m/config.h index b3676e9704..cdb9b81967 100644 --- a/keyboards/at_at/660m/config.h +++ b/keyboards/at_at/660m/config.h @@ -17,7 +17,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -/* Ensure we jump to bootloader if the RESET keycode was pressed */ +/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */ #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE /* LSE clock */ diff --git a/keyboards/boardrun/bizarre/readme.md b/keyboards/boardrun/bizarre/readme.md index 5c73313d38..3ca84dfac2 100644 --- a/keyboards/boardrun/bizarre/readme.md +++ b/keyboards/boardrun/bizarre/readme.md @@ -18,6 +18,6 @@ Flashing example for this keyboard: make boardrun/bizarre:default:flash -The board may be reset into bootloader mode via either the reset button (on the bottom of the PCB) or a configured RESET shortcut (which may vary depending on when the PCB was flashed). +The board may be reset into bootloader mode via either the reset button (on the bottom of the PCB) or a configured `QK_BOOT` shortcut (which may vary depending on when the PCB was flashed). See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/boardrun/classic/readme.md b/keyboards/boardrun/classic/readme.md index 2ed4ff1bd0..eeb2c0d55c 100644 --- a/keyboards/boardrun/classic/readme.md +++ b/keyboards/boardrun/classic/readme.md @@ -18,6 +18,6 @@ Flashing example for this keyboard: make boardrun/classic:default:flash -The board may be reset into bootloader mode via either the reset button (on the bottom of the PCB) or a configured RESET shortcut (which may vary depending on when the PCB was flashed). +The board may be reset into bootloader mode via either the reset button (on the bottom of the PCB) or a configured `QK_BOOT` shortcut (which may vary depending on when the PCB was flashed). See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/cannonkeys/malicious_ergo/readme.md b/keyboards/cannonkeys/malicious_ergo/readme.md index 2103fe04db..72cb963070 100644 --- a/keyboards/cannonkeys/malicious_ergo/readme.md +++ b/keyboards/cannonkeys/malicious_ergo/readme.md @@ -13,6 +13,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Toggle the switch on the back of the pcb to "0" and briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/cannonkeys/nearfield/readme.md b/keyboards/cannonkeys/nearfield/readme.md index ea63a5f221..fca9388ce7 100644 --- a/keyboards/cannonkeys/nearfield/readme.md +++ b/keyboards/cannonkeys/nearfield/readme.md @@ -26,6 +26,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the top left key and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/cannonkeys/satisfaction75/config.h b/keyboards/cannonkeys/satisfaction75/config.h index ef4123770d..615ad1d056 100644 --- a/keyboards/cannonkeys/satisfaction75/config.h +++ b/keyboards/cannonkeys/satisfaction75/config.h @@ -17,7 +17,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -/* Ensure we jump to bootloader if the RESET keycode was pressed */ +/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */ #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE /* LSE clock */ diff --git a/keyboards/capsunlocked/cu75/cu75.c b/keyboards/capsunlocked/cu75/cu75.c index e52edd90fa..690d72055a 100644 --- a/keyboards/capsunlocked/cu75/cu75.c +++ b/keyboards/capsunlocked/cu75/cu75.c @@ -91,7 +91,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record) if (click_toggle && record->event.pressed){ click(click_hz, click_time); } - if (keycode == RESET) { + if (keycode == QK_BOOT) { reset_keyboard_kb(); } else { } diff --git a/keyboards/carbo65/config.h b/keyboards/carbo65/config.h index 2e547604d1..dfbd4db1ac 100644 --- a/keyboards/carbo65/config.h +++ b/keyboards/carbo65/config.h @@ -32,7 +32,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 -/* Ensure we jump to bootloader if the RESET keycode was pressed */ +/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */ #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE /* Indicator LEDs */ diff --git a/keyboards/clueboard/66/rev4/mine/keymap.c b/keyboards/clueboard/66/rev4/mine/keymap.c deleted file mode 100644 index df145eb488..0000000000 --- a/keyboards/clueboard/66/rev4/mine/keymap.c +++ /dev/null @@ -1,13 +0,0 @@ -#include QMK_KEYBOARD_H - -/* THIS FILE WAS GENERATED! - * - * This file was generated by qmk json2c. You may or may not want to - * edit it directly. - */ - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT(KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), - [1] = LAYOUT(KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_MUTE, KC_VOLD, KC_TRNS, KC_TRNS, MO(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(1), KC_TRNS, KC_HOME, KC_PGDN, KC_END), - [2] = LAYOUT(BL_STEP, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, KC_TRNS, KC_TRNS, MO(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD, RGB_MOD, KC_TRNS, KC_TRNS, MO(1), KC_TRNS, RGB_HUD, RGB_SAD, RGB_HUI) -}; diff --git a/keyboards/emery65/config.h b/keyboards/emery65/config.h index 2e547604d1..dfbd4db1ac 100644 --- a/keyboards/emery65/config.h +++ b/keyboards/emery65/config.h @@ -32,7 +32,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 -/* Ensure we jump to bootloader if the RESET keycode was pressed */ +/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */ #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE /* Indicator LEDs */ diff --git a/keyboards/feker/ik75/readme.md b/keyboards/feker/ik75/readme.md index ed88e6123e..e533f4a200 100644 --- a/keyboards/feker/ik75/readme.md +++ b/keyboards/feker/ik75/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (Esc key) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to RESET if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/fjlabs/avalon/readme.md b/keyboards/fjlabs/avalon/readme.md index 30e2c49044..154f48ac6c 100644 --- a/keyboards/fjlabs/avalon/readme.md +++ b/keyboards/fjlabs/avalon/readme.md @@ -16,4 +16,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available
\ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
\ No newline at end of file diff --git a/keyboards/foostan/cornelius/readme.md b/keyboards/foostan/cornelius/readme.md index ffd6b60a16..ce0854dd75 100644 --- a/keyboards/foostan/cornelius/readme.md +++ b/keyboards/foostan/cornelius/readme.md @@ -16,6 +16,6 @@ Flashing example for this keyboard: make foostan/cornelius:default:flash -The board reset into bootloader mode via either the reset button (on the back of the PCB) or a configured RESET shortcut (which may vary depending on when the PCB was flashed). +The board reset into bootloader mode via either the reset button (on the back of the PCB) or a configured `QK_BOOT` shortcut (which may vary depending on when the PCB was flashed). See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/hand88/config.h b/keyboards/hand88/config.h index 78e7dadc9b..cb2c25cb8f 100755 --- a/keyboards/hand88/config.h +++ b/keyboards/hand88/config.h @@ -32,7 +32,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 -/* Ensure we jump to bootloader if the RESET keycode was pressed */ +/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */ #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE /* Indicator LEDs */ diff --git a/keyboards/handwired/cyberstar/config.h b/keyboards/handwired/cyberstar/config.h index 755fa5b6c0..bedeb157be 100644 --- a/keyboards/handwired/cyberstar/config.h +++ b/keyboards/handwired/cyberstar/config.h @@ -32,7 +32,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 -/* Ensure we jump to bootloader if the RESET keycode was pressed */ +/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */ #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE /* RGB Light */ diff --git a/keyboards/handwired/dactyl/readme.md b/keyboards/handwired/dactyl/readme.md index 698ef29e01..e99df7f5a2 100644 --- a/keyboards/handwired/dactyl/readme.md +++ b/keyboards/handwired/dactyl/readme.md @@ -21,7 +21,7 @@ To flash the firmware: - Load the .hex file into it. - Put the Teensy in firmware-loading mode: - * If your current layout has a RESET key, press it. + * If your current layout has a `QK_BOOT` key, press it. * If you lack a RESET key, press the reset button on the Teensy board itself. - Click the button in the Teensy app to download the firmware. @@ -35,5 +35,5 @@ To flash with ´teensy-loader-cli´: - If you like, you can do both at once: `make handwired/dactyl:<keymapname>:teensy` - Put the Teensy in firmware-loading mode: - * If your current layout has a RESET key, press it. + * If your current layout has a `QK_BOOT` key, press it. * If you lack a RESET key, press the reset button on the Teensy board itself. diff --git a/keyboards/idobao/id80/v1/readme.md b/keyboards/idobao/id80/v1/readme.md index 9be4dffeae..c9c446e1b7 100644 --- a/keyboards/idobao/id80/v1/readme.md +++ b/keyboards/idobao/id80/v1/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the Escape key and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/idobao/id80/v2/readme.md b/keyboards/idobao/id80/v2/readme.md index 11d9856913..333de28523 100644 --- a/keyboards/idobao/id80/v2/readme.md +++ b/keyboards/idobao/id80/v2/readme.md @@ -38,4 +38,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the Escape key and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available *(default is [Fn]+[Esc])* +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available *(default is [Fn]+[Esc])* diff --git a/keyboards/jacky_studio/s7_elephant/readme.md b/keyboards/jacky_studio/s7_elephant/readme.md index 1cfeefb209..7e441ac8ea 100644 --- a/keyboards/jacky_studio/s7_elephant/readme.md +++ b/keyboards/jacky_studio/s7_elephant/readme.md @@ -15,6 +15,6 @@ Make example for this keyboard (after setting up your build environment): make jacky_studio/s7_elephant/rev1:default # 2018 run make jacky_studio/s7_elephant/rev2:default # 2019 run -To enter the bootloader, either short the pins on the PCB or the RESET button on the FN layer. +To enter the bootloader, either short the pins on the PCB or the `QK_BOOT` key on the FN layer. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/jacky_studio/s7_elephant/rev1/readme.md b/keyboards/jacky_studio/s7_elephant/rev1/readme.md index 702be4c3a7..8308f60f62 100644 --- a/keyboards/jacky_studio/s7_elephant/rev1/readme.md +++ b/keyboards/jacky_studio/s7_elephant/rev1/readme.md @@ -12,6 +12,6 @@ Make example for this keyboard (after setting up your build environment): make s7_elephant/rev1:default -To enter the bootloader, either short the pins on the PCB or the RESET button on the FN layer. +To enter the bootloader, either short the pins on the PCB or the `QK_BOOT` key on the FN layer. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kegen/gboy/readme.md b/keyboards/kegen/gboy/readme.md index 942d50d308..25ca760ff4 100644 --- a/keyboards/kegen/gboy/readme.md +++ b/keyboards/kegen/gboy/readme.md @@ -25,4 +25,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/lazydesigners/bolt/readme.md b/keyboards/lazydesigners/bolt/readme.md index d89bca097e..4d759ea706 100644 --- a/keyboards/lazydesigners/bolt/readme.md +++ b/keyboards/lazydesigners/bolt/readme.md @@ -16,6 +16,6 @@ Flashing example for this keyboard: make lazydesigners/bolt:default:flash -**Reset Key:** To enter the bootloader, either push the RESET button on the PCB or the RESET button on the FN layer. +**Reset Key:** To enter the bootloader, either push the RESET button on the PCB or the `QK_BOOT` key on the FN layer. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/lazydesigners/cassette8/readme.md b/keyboards/lazydesigners/cassette8/readme.md index 7211bf5e97..b973c45037 100755 --- a/keyboards/lazydesigners/cassette8/readme.md +++ b/keyboards/lazydesigners/cassette8/readme.md @@ -16,6 +16,6 @@ Flashing example for this keyboard: make lazydesigners/cassette8:default:flash -**Reset Key:** To enter the bootloader, either push the RESET button on the PCB or the RESET button on the FN layer. +**Reset Key:** To enter the bootloader, either push the RESET button on the PCB or the `QK_BOOT` key on the FN layer. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/lazydesigners/dimple/readme.md b/keyboards/lazydesigners/dimple/readme.md index 2e15cec2b9..b6e59272d6 100644 --- a/keyboards/lazydesigners/dimple/readme.md +++ b/keyboards/lazydesigners/dimple/readme.md @@ -21,6 +21,6 @@ Make example for this keyboard (after setting up your build environment): make lazydesigners/dimple/staggered/rev2:default make lazydesigners/dimple/ortho:default -To enter the bootloader, either short the pins on the PCB or the RESET button on the FN layer. +To enter the bootloader, either short the pins on the PCB or the `QK_BOOT` key on the FN layer. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/lazydesigners/dimpleplus/readme.md b/keyboards/lazydesigners/dimpleplus/readme.md index fc5881cdc1..78db492427 100644 --- a/keyboards/lazydesigners/dimpleplus/readme.md +++ b/keyboards/lazydesigners/dimpleplus/readme.md @@ -14,6 +14,6 @@ Flashing example for this keyboard: make lazydesigners/dimpleplus:default:flash -**Reset Key:** To enter the bootloader, either push the RESET button on the PCB or the RESET button on the FN layer. +**Reset Key:** To enter the bootloader, either push the RESET button on the PCB or the `QK_BOOT` key on the FN layer. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/lazydesigners/the40/readme.md b/keyboards/lazydesigners/the40/readme.md index e618967561..2b0a163628 100644 --- a/keyboards/lazydesigners/the40/readme.md +++ b/keyboards/lazydesigners/the40/readme.md @@ -21,6 +21,6 @@ Flashing example for this keyboard: make lazydesigners/the40:default:flash -**Reset Key:** To enter the bootloader, either push the RESET button on the PCB or the RESET button on the FN layer. +**Reset Key:** To enter the bootloader, either push the RESET button on the PCB or the `QK_BOOT` key on the FN layer. See the [build environment setup](https://docs.qm |