summaryrefslogtreecommitdiffstats
path: root/keyboards
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards')
-rw-r--r--keyboards/synthlabs/solo/config.h64
-rw-r--r--keyboards/synthlabs/solo/info.json43
-rw-r--r--keyboards/synthlabs/solo/keymaps/default/keymap.c12
-rw-r--r--keyboards/synthlabs/solo/keymaps/default/readme.md3
-rw-r--r--keyboards/synthlabs/solo/keymaps/gamepad/keymap.c35
-rw-r--r--keyboards/synthlabs/solo/keymaps/gamepad/readme.md3
-rw-r--r--keyboards/synthlabs/solo/keymaps/gamepad/rules.mk2
-rw-r--r--keyboards/synthlabs/solo/keymaps/via/keymap.c74
-rw-r--r--keyboards/synthlabs/solo/keymaps/via/rules.mk1
-rw-r--r--keyboards/synthlabs/solo/readme.md28
-rw-r--r--keyboards/synthlabs/solo/rules.mk13
-rw-r--r--keyboards/synthlabs/solo/solo.c18
-rw-r--r--keyboards/synthlabs/solo/solo.h41
13 files changed, 337 insertions, 0 deletions
diff --git a/keyboards/synthlabs/solo/config.h b/keyboards/synthlabs/solo/config.h
new file mode 100644
index 0000000000..02fbd7abe0
--- /dev/null
+++ b/keyboards/synthlabs/solo/config.h
@@ -0,0 +1,64 @@
+// Copyright 2022 Aaron Hong (@hongaaronc)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define MANUFACTURER Synth Labs
+#define PRODUCT Solo
+
+#define ENCODERS 1
+#define ENCODER_RESOLUTION 4
+#define ENCODERS_PAD_A { B2 }
+#define ENCODERS_PAD_B { B3 }
+#define ENCODERS_CW_KEY { { 2, 1 } }
+#define ENCODERS_CCW_KEY { { 0, 1 } }
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 7
+
+#define QMK_KEYS_PER_SCAN 17
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+
+#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+#define BOOTMAGIC_LITE_ROW 1
+#define BOOTMAGIC_LITE_COLUMN 1
+
+#define JOYSTICK_BUTTON_COUNT 8
+#define JOYSTICK_AXES_COUNT 1
+#define JOYSTICK_AXES_RESOLUTION 16
diff --git a/keyboards/synthlabs/solo/info.json b/keyboards/synthlabs/solo/info.json
new file mode 100644
index 0000000000..18a144a8b3
--- /dev/null
+++ b/keyboards/synthlabs/solo/info.json
@@ -0,0 +1,43 @@
+{
+ "keyboard_name": "Synth Labs Solo",
+ "url": "http://solo.synthlabs.io",
+ "maintainer": "hongaaronc",
+ "bootloader": "atmel-dfu",
+ "processor": "atmega32u4",
+ "debounce": 5,
+ "matrix_pins": {
+ "direct": [
+ ["C6", "D6", "B5", "B4", "D7", "B6", "D4"],
+ [null, "B7", null, null, null, null, null],
+ ["F0", "F7", "F4", "F5", "F6", "F1", "C7"]
+ ]
+ },
+ "usb": {
+ "vid": "0x534E",
+ "pid": "0x3031",
+ "device_ver": "0x0001"
+ },
+ "layouts": {
+ "LAYOUT": {
+ "layout": [
+ {"label":"P2 1", "x":3, "y":0, "w":0.5, "h":1.5, "matrix":[0,0]},
+ {"label":"P1 2", "x":3.5, "y":0, "w":0.5, "h":1.5, "matrix":[0,1]},
+ {"label":"P2 3", "x":4, "y":0, "w":0.5, "h":1.5, "matrix":[0,2]},
+ {"label":"P1 4", "x":4.5, "y":0, "w":0.5, "h":1.5, "matrix":[0,3]},
+ {"label":"P2 5", "x":5, "y":0, "w":0.5, "h":1.5, "matrix":[0,4]},
+ {"label":"P1 6", "x":5.5, "y":0, "w":0.5, "h":1.5, "matrix":[0,5]},
+ {"label":"P2 7", "x":6, "y":0, "w":0.5, "h":1.5, "matrix":[0,6]},
+ {"label":"Knob Press", "x":0.5, "y":1, "w":1.5, "h":1.5, "matrix":[1,1]},
+ {"label":"Knob CCW", "x":0, "y":1.25, "w":0.5, "matrix":[1,0]},
+ {"label":"Knob CW", "x":2, "y":1.25, "w":0.5, "matrix":[1,2]},
+ {"label":"P1 1", "x":3, "y":2, "w":0.5, "h":1.5, "matrix":[2,0]},
+ {"label":"P2 2", "x":3.5, "y":2, "w":0.5, "h":1.5, "matrix":[2,1]},
+ {"label":"P1 3", "x":4, "y":2, "w":0.5, "h":1.5, "matrix":[2,2]},
+ {"label":"P2 4", "x":4.5, "y":2, "w":0.5, "h":1.5, "matrix":[2,3]},
+ {"label":"P1 5", "x":5, "y":2, "w":0.5, "h":1.5, "matrix":[2,4]},
+ {"label":"P2 6", "x":5.5, "y":2, "w":0.5, "h":1.5, "matrix":[2,5]},
+ {"label":"P1 7", "x":6, "y":2, "w":0.5, "h":1.5, "matrix":[2,6]}
+ ]
+ }
+ }
+}
diff --git a/keyboards/synthlabs/solo/keymaps/default/keymap.c b/keyboards/synthlabs/solo/keymaps/default/keymap.c
new file mode 100644
index 0000000000..fa54111fe8
--- /dev/null
+++ b/keyboards/synthlabs/solo/keymaps/default/keymap.c
@@ -0,0 +1,12 @@
+// Copyright 2022 Aaron Hong (@hongaaronc)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT_all(
+ KC_J, KC_U, KC_K, KC_I, KC_L, KC_O, KC_SCLN,
+ _______, KC_MUTE, _______,
+ KC_J, KC_U, KC_K, KC_I, KC_L, KC_O, KC_SCLN
+ )
+};
diff --git a/keyboards/synthlabs/solo/keymaps/default/readme.md b/keyboards/synthlabs/solo/keymaps/default/readme.md
new file mode 100644
index 0000000000..625bd392b6
--- /dev/null
+++ b/keyboards/synthlabs/solo/keymaps/default/readme.md
@@ -0,0 +1,3 @@
+# Default Synth Labs Solo Layout
+
+This keymap is intended for usage as a macropad.
diff --git a/keyboards/synthlabs/solo/keymaps/gamepad/keymap.c b/keyboards/synthlabs/solo/keymaps/gamepad/keymap.c
new file mode 100644
index 0000000000..3e55f346f1
--- /dev/null
+++ b/keyboards/synthlabs/solo/keymaps/gamepad/keymap.c
@@ -0,0 +1,35 @@
+// Copyright 2022 Aaron Hong (@hongaaronc)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+#include "joystick.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT_all(
+ JS_BUTTON0,JS_BUTTON1,JS_BUTTON2,JS_BUTTON3,JS_BUTTON4,JS_BUTTON5,JS_BUTTON6,
+ KC_NO, JS_BUTTON7, KC_NO,
+ JS_BUTTON0,JS_BUTTON1,JS_BUTTON2,JS_BUTTON3,JS_BUTTON4,JS_BUTTON5,JS_BUTTON6
+ )
+};
+
+#if defined(JOYSTICK_ENABLE) && defined(ENCODER_ENABLE)
+
+int16_t joystick_position = 0;
+int16_t pulses_per_revolution = 24; // Depends on encoder model. Usually 18ppr or 24ppr for Bourns EC11s.
+int16_t full_joystick_value = 32767; // Equivalent to max value of int16. +full_joystick_value is +1.0 axis output. -full_joystick_value is -1.0 axis output.
+joystick_config_t joystick_axes[JOYSTICK_AXES_COUNT] = {
+ [0] = JOYSTICK_AXIS_VIRTUAL
+};
+
+bool encoder_update_kb(uint8_t index, bool clockwise) {
+ joystick_position += (clockwise ? 2 : -2) * (full_joystick_value / pulses_per_revolution); // +2 and -2 are used, since +1.0 and -1.0 axis output refers to positions at half of a full rotation
+
+ if (joystick_position != joystick_status.axes[0]) {
+ joystick_status.axes[0] = joystick_position;
+ joystick_status.status |= JS_UPDATED;
+ }
+ return true;
+}
+
+#endif
diff --git a/keyboards/synthlabs/solo/keymaps/gamepad/readme.md b/keyboards/synthlabs/solo/keymaps/gamepad/readme.md
new file mode 100644
index 0000000000..9930bb61b4
--- /dev/null
+++ b/keyboards/synthlabs/solo/keymaps/gamepad/readme.md
@@ -0,0 +1,3 @@
+# Gamepad Synth Labs Solo Layout
+
+This keymap is intended for usage as a IIDX controller. The rotary encoder is mapped as a virtual 1-axis joystick.
diff --git a/keyboards/synthlabs/solo/keymaps/gamepad/rules.mk b/keyboards/synthlabs/solo/keymaps/gamepad/rules.mk
new file mode 100644
index 0000000000..30c23b8763
--- /dev/null
+++ b/keyboards/synthlabs/solo/keymaps/gamepad/rules.mk
@@ -0,0 +1,2 @@
+JOYSTICK_ENABLE = yes
+DEBOUNCE_TYPE = sym_eager_pk
diff --git a/keyboards/synthlabs/solo/keymaps/via/keymap.c b/keyboards/synthlabs/solo/keymaps/via/keymap.c
new file mode 100644
index 0000000000..7949c61375
--- /dev/null
+++ b/keyboards/synthlabs/solo/keymaps/via/keymap.c
@@ -0,0 +1,74 @@
+// Copyright 2022 Aaron Hong (@hongaaronc)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT_all(
+ KC_J, KC_U, KC_K, KC_I, KC_L, KC_O, KC_SCLN,
+ KC_VOLD, KC_MUTE, KC_VOLU,
+ KC_J, KC_U, KC_K, KC_I, KC_L, KC_O, KC_SCLN
+ ),
+ [1] = LAYOUT_all(
+ _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______
+ ),
+ [2] = LAYOUT_all(
+ _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______
+ ),
+ [3] = LAYOUT_all(
+ _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______
+ )
+};
+
+#if defined(VIA_ENABLE) && defined(ENCODER_ENABLE)
+
+#ifdef ENCODERS
+static uint8_t encoder_state[] = {0};
+static keypos_t encoder_cw[] = ENCODERS_CW_KEY;
+static keypos_t encoder_ccw[] = ENCODERS_CCW_KEY;
+#endif
+
+void encoder_action_unregister(void) {
+#ifdef ENCODERS
+ for (int index = 0; index < ENCODERS; ++index) {
+ if (encoder_state[index]) {
+ keyevent_t encoder_event = (keyevent_t) {
+ .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index],
+ .pressed = false,
+ .time = (timer_read() | 1)
+ };
+ encoder_state[index] = 0;
+ action_exec(encoder_event);
+ }
+ }
+#endif
+}
+
+void encoder_action_register(uint8_t index, bool clockwise) {
+#ifdef ENCODERS
+ keyevent_t encoder_event = (keyevent_t) {
+ .key = clockwise ? encoder_cw[index] : encoder_ccw[index],
+ .pressed = true,
+ .time = (timer_read() | 1)
+ };
+ encoder_state[index] = (clockwise ^ 1) | (clockwise << 1);
+ action_exec(encoder_event);
+#endif
+}
+
+void matrix_scan_user(void) {
+ encoder_action_unregister();
+}
+
+bool encoder_update_user(uint8_t index, bool clockwise) {
+ encoder_action_register(index, clockwise);
+ return false;
+}
+
+#endif
diff --git a/keyboards/synthlabs/solo/keymaps/via/rules.mk b/keyboards/synthlabs/solo/keymaps/via/rules.mk
new file mode 100644
index 0000000000..1e5b99807c
--- /dev/null
+++ b/keyboards/synthlabs/solo/keymaps/via/rules.mk
@@ -0,0 +1 @@
+VIA_ENABLE = yes
diff --git a/keyboards/synthlabs/solo/readme.md b/keyboards/synthlabs/solo/readme.md
new file mode 100644
index 0000000000..204bc3857f
--- /dev/null
+++ b/keyboards/synthlabs/solo/readme.md
@@ -0,0 +1,28 @@
+# Synth Labs Solo
+
+![Synth Labs Solo](https://i.imgur.com/uVUtfksh.png)
+
+The Solo Macropad by Synth Labs.
+
+* Keyboard Maintainer: [Nostril](https://github.com/hongaaronc)
+* Hardware Supported: Synth Labs Solo
+* Hardware Availability: [https://solo.synthlabs.io/](https://solo.synthlabs.io/)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make synthlabs/solo:default
+
+Flashing example for this keyboard:
+
+ make synthlabs/solo:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (1,1) in the matrix (the rotary encoder button) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+*
diff --git a/keyboards/synthlabs/solo/rules.mk b/keyboards/synthlabs/solo/rules.mk
new file mode 100644
index 0000000000..131aa72aeb
--- /dev/null
+++ b/keyboards/synthlabs/solo/rules.mk
@@ -0,0 +1,13 @@
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = yes # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+AUDIO_ENABLE = no # Audio output
+ENCODER_ENABLE = yes
diff --git a/keyboards/synthlabs/solo/solo.c b/keyboards/synthlabs/solo/solo.c
new file mode 100644
index 0000000000..b557a3505c
--- /dev/null
+++ b/keyboards/synthlabs/solo/solo.c
@@ -0,0 +1,18 @@
+// Copyright 2022 Aaron Hong (@hongaaronc)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "solo.h"
+
+#if !defined(VIA_ENABLE) && !defined(JOYSTICK_ENABLE) && defined(ENCODER_ENABLE)
+bool encoder_update_kb(uint8_t index, bool clockwise) {
+ if (!encoder_update_user(index, clockwise)) { return false; }
+ if (index == 0) {
+ if (clockwise) {
+ tap_code_delay(KC_VOLU, 10);
+ } else {
+ tap_code_delay(KC_VOLD, 10);
+ }
+ }
+ return true;
+}
+#endif
diff --git a/keyboards/synthlabs/solo/solo.h b/keyboards/synthlabs/solo/solo.h
new file mode 100644
index 0000000000..c487446a49
--- /dev/null
+++ b/keyboards/synthlabs/solo/solo.h
@@ -0,0 +1,41 @@
+// Copyright 2022 Aaron Hong (@hongaaronc)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "quantum.h"
+
+#define XXX KC_NO
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT_all( \
+ k00, k01, k02, k03, k04, k05, k06, \
+ k10, k11, k12, \
+ k20, k21, k22, k23, k24, k25, k26 \
+) { \
+ { k00, k01, k02, k03, k04, k05, k06 }, \
+ { k10, k11, k12, XXX, XXX, XXX, XXX }, \
+ { k20, k21, k22, k23, k24, k25, k26 } \
+}
+
+#define LAYOUT_left( \
+ k01, k03, k05, \
+ k10, k11, k12, \
+ k20, k22, k24, k26 \
+) { \
+ { XXX, k01, XXX, k03, XXX, k05, XXX }, \
+ { k10, k11, k12, XXX, XXX, XXX, XXX }, \
+ { k20, XXX, k22, XXX, k24, XXX, k26 } \
+}
+
+#define LAYOUT_right( \
+ k25, k23, k21, \
+ k10, k11, k12, \
+ k06, k04, k02, k00 \
+) { \
+ { k00, XXX, k02, XXX, k04, XXX, k06 }, \
+ { k10, k11, k12, XXX, XXX, XXX, XXX }, \
+ { XXX, k21, XXX, k23, XXX, k25, XXX } \
+}
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-11 07:56:48 +0000