diff options
Diffstat (limited to 'keyboards')
| -rw-r--r-- | keyboards/daisy/config.h | 175 | ||||
| -rw-r--r-- | keyboards/daisy/daisy.c | 15 | ||||
| -rw-r--r-- | keyboards/daisy/daisy.h | 19 | ||||
| -rw-r--r-- | keyboards/daisy/keymaps/default/keymap.c | 99 | ||||
| -rw-r--r-- | keyboards/daisy/keymaps/default/readme.md | 5 | ||||
| -rw-r--r-- | keyboards/daisy/readme.md | 29 | ||||
| -rw-r--r-- | keyboards/daisy/rules.mk | 66 |
7 files changed, 408 insertions, 0 deletions
diff --git a/keyboards/daisy/config.h b/keyboards/daisy/config.h new file mode 100644 index 0000000000..d2ab92f875 --- /dev/null +++ b/keyboards/daisy/config.h @@ -0,0 +1,175 @@ +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x1209 +#define PRODUCT_ID 0x2328 +#define DEVICE_VER 0x501 +#define MANUFACTURER K.T.E.C. +#define PRODUCT Daisy +#define DESCRIPTION qmk port for Daisy + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 11 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D2, D3, D5, B7 } +#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, B6, B5, B4, D7, D6 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ +#define DIODE_DIRECTION COL2ROW + +#define BACKLIGHT_PIN D0 +#define BACKLIGHT_LEVELS 6 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +// ws2812 options +#define RGB_DI_PIN C7 // pin the DI on the ws2812 is hooked-up to +#define RGBLIGHT_ANIMATIONS // run RGB animations +#define RGBLED_NUM 8 // number of LEDs +#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue +#define RGBLIGHT_SAT_STEP 25 // units to step when in/decresing saturation +#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness) + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +#endif diff --git a/keyboards/daisy/daisy.c b/keyboards/daisy/daisy.c new file mode 100644 index 0000000000..f8ca24ff0b --- /dev/null +++ b/keyboards/daisy/daisy.c @@ -0,0 +1,15 @@ +#include "daisy.h" + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // output low + DDRC |= (1<<PC6); + PORTC &= ~(1<<PC6); + } else { + // Hi-Z + DDRC &= ~(1<<PC6); + PORTC &= ~(1<<PC6); + } + led_set_user(usb_led); +}
\ No newline at end of file diff --git a/keyboards/daisy/daisy.h b/keyboards/daisy/daisy.h new file mode 100644 index 0000000000..7e45bee2b5 --- /dev/null +++ b/keyboards/daisy/daisy.h @@ -0,0 +1,19 @@ +#ifndef DAISY_H +#define DAISY_H + +#include "quantum.h" + +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K3A, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, \ + K30, K31, K32, K34, K35, K37, K38, K39 \ +) \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A }, \ + { K30, K31, K32, KC_NO, K34, K35, KC_NO, K37, K38, K39, K3A } \ +} + +#endif
\ No newline at end of file diff --git a/keyboards/daisy/keymaps/default/keymap.c b/keyboards/daisy/keymaps/default/keymap.c new file mode 100644 index 0000000000..ff08cf0a8f --- /dev/null +++ b/keyboards/daisy/keymaps/default/keymap.c @@ -0,0 +1,99 @@ + #include "daisy.h" +#include "action_layer.h" + +extern keymap_config_t keymap_config; + +// Layer shorthand +#define _BL 0 +#define _LW 1 +#define _RS 2 + +enum layer_keycodes { + QWERTY = SAFE_RANGE, LOWER, RAISE +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Base Layer + * .-----------------------------------------------------------------------. + * | ESC | Q | W | E | R | T | Y | U | I | O | P | \| | + * |-----------------------------------------------------------------------| + * | TAB | A | S | D | F | G | H | J | K | L | ENTER | + * |-----------------------------------------------------------------------| + * | LSHIFT | Z | X | C | V | B | N | M | ,< | .> | /? | + * |-----------------------------------------------------------------------| + * | LCTRL | LGUI | LALT | SPACE | BACKSPACE | LW | RS | RALT | + * '-----------------------------------------------------------------------' + */ + + [_BL] = KEYMAP( + GRAVE_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_BSPC, LOWER, RAISE, KC_RALT ), + + +/* Function Layer + * .-----------------------------------------------------------------------. + * | GRV | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | -_ | + * |-----------------------------------------------------------------------| + * | | =+ | UP | | | | [{ | ]} | ;: | '" | | + * |-----------------------------------------------------------------------| + * | | LEFT| DOWN |RIGHT| | | | | | | | + * |-----------------------------------------------------------------------| + * | | | | | DELETE | | | | + * '-----------------------------------------------------------------------' + */ + + [_LW] = KEYMAP( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + KC_TRNS, KC_EQL, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_SCLN, KC_QUOT, KC_TRNS, + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_LCTL, KC_LGUI, KC_LALT, KC_TRNS, KC_DEL, KC_TRNS, KC_TRNS, KC_TRNS ), + + + /* Second Function Layer + * .-----------------------------------------------------------------------. + * | RST | F1 | F2 | F3 | F4 | F5 | F6 | | HOME| PGUP| | | + * |-----------------------------------------------------------------------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | END | PGDN| | + * |-----------------------------------------------------------------------| + * | |RGBtog|RGBmod|RGBhud|RGBhui|RGBvad|RGBvai|RGBsad|RGBsai|BL| | + * |-----------------------------------------------------------------------| + * | | | | | | | | | + * '-----------------------------------------------------------------------' + */ + + [_RS] = KEYMAP( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS, KC_TRNS, + KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_SMOD, RGB_HUD, RGB_HUI, RGB_VAD, RGB_VAI, RGB_SAD, RGB_SAI, BL_STEP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), + +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case LOWER: + if(record->event.pressed){ + layer_on(_LW); + } else { + layer_off(_LW); + } + return false; + break; + case RAISE: + if(record->event.pressed){ + layer_on(_RS); + } else { + layer_off(_RS); + } + return false; + break; + } + return true; +};
\ No newline at end of file diff --git a/keyboards/daisy/keymaps/default/readme.md b/keyboards/daisy/keymaps/default/readme.md new file mode 100644 index 0000000000..dff0dcbdee --- /dev/null +++ b/keyboards/daisy/keymaps/default/readme.md @@ -0,0 +1,5 @@ + + +# Default Daisy Layout + +This is the default layout as offered by KPRepublic's TMK firmware for the Daisy with a few minor tweaks for usability made by me. diff --git a/keyboards/daisy/readme.md b/keyboards/daisy/readme.md new file mode 100644 index 0000000000..427891d96e --- /dev/null +++ b/keyboards/daisy/readme.md @@ -0,0 +1,29 @@ +# Daisy + +A 40% keyboard kit sold by KPRepublic. + +Keyboard Maintainer: westfoxtrot (https://github.com/westfoxtrot) +Hardware Supported: Daisy PCB Rev.1, Daisy PCB Rev.2 +Hardware Availability: http://tinyurl.com/yc26lq22 + +Make example for this keyboard (after setting up your build environment): + + make daisy:default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. + + +# Other Keymaps + +The "default" keymap included is the layout I personally use on the Daisy and the one I have found the most comfortable. + +A printable picture showing this layout is available here: https://imgur.com/9mSF0yf + + +``` +$ make daisy:[default|<name>] +``` + +# Bootloader + +I personally had issues with the bootloader on my Daisy PCB and was unable to flash a firmware to the board after the first time. I replaced the bootloader with the one available in the repository at ../../util/bootloader_atmega32u4_1_0_0.hex diff --git a/keyboards/daisy/rules.mk b/keyboards/daisy/rules.mk new file mode 100644 index 0000000000..f24df2fd6c --- /dev/null +++ b/keyboards/daisy/rules.mk @@ -0,0 +1,66 @@ +# MCU name +#MCU = at90usb1286 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4996 + +# QMK Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
\ No newline at end of file |