diff options
Diffstat (limited to 'keyboards')
25 files changed, 2771 insertions, 8 deletions
diff --git a/keyboards/dztech/dz40rgb/bootloader_defs.h b/keyboards/dztech/dz40rgb/bootloader_defs.h new file mode 100644 index 0000000000..3b0e9d20a6 --- /dev/null +++ b/keyboards/dztech/dz40rgb/bootloader_defs.h @@ -0,0 +1,7 @@ +/* Address for jumping to bootloader on STM32 chips. */ +/* It is chip dependent, the correct number can be looked up here: + * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf + * This also requires a patch to chibios: + * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch + */ +#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800 diff --git a/keyboards/dztech/dz40rgb/chconf.h b/keyboards/dztech/dz40rgb/chconf.h new file mode 100644 index 0000000000..1d9f12ff1f --- /dev/null +++ b/keyboards/dztech/dz40rgb/chconf.h @@ -0,0 +1,520 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 100000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY TRUE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/dztech/dz40rgb/config.h b/keyboards/dztech/dz40rgb/config.h new file mode 100644 index 0000000000..2ac7fbdc87 --- /dev/null +++ b/keyboards/dztech/dz40rgb/config.h @@ -0,0 +1,34 @@ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x1220 +#define DEVICE_VER 0x0001 +#define MANUFACTURER DZTECH +#define PRODUCT DZ40RGB +#define DESCRIPTION DZ40 ARM RGB keyboard +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +#define MATRIX_ROW_PINS { B13, B12, A2, A1 } +#define MATRIX_COL_PINS {A6, A7, B0, B1, C15, C14, C13, B9, B8, A8, B14, B15 } + +/* #define UNUSED_PINS {A0,A1,A2, A3,A4,A9,A10,C15,A13,A14,B2}*/ + +#define DIODE_DIRECTION COL2ROW + +#define DEBOUNCE 3 +#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended +#define RGB_MATRIX_SKIP_FRAMES 0 +#define RGB_MATRIX_KEYPRESSES +#define DISABLE_RGB_MATRIX_SPLASH +#define DISABLE_RGB_MATRIX_MULTISPLASH +#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +#define DRIVER_ADDR_1 0b1010000 +#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons. + +#define DRIVER_COUNT 2 + diff --git a/keyboards/dztech/dz40rgb/dz40rgb.c b/keyboards/dztech/dz40rgb/dz40rgb.c new file mode 100644 index 0000000000..b1a03760f8 --- /dev/null +++ b/keyboards/dztech/dz40rgb/dz40rgb.c @@ -0,0 +1,297 @@ +#include "dz40rgb.h" +#include "config.h" +#if defined (split_space) +const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { +/* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + {0, K_12, J_12, L_12}, + {0, K_11, J_11, L_11}, + {0, K_10, J_10, L_10}, + {0, K_9, J_9, L_9}, + {0, K_8, J_8, L_8}, + {0, K_7, J_7, L_7}, + {0, K_6, J_6, L_6}, + {0, K_5, J_5, L_5}, + {0, K_4, J_4, L_4}, + {0, K_3, J_3, L_3}, + {0, K_2, J_2, L_2}, + {0, K_1, J_1, L_1}, + + {0, K_13, J_13, L_13}, + {0, K_14, J_14, L_14}, + + {0, H_12, G_12, I_12}, + {0, H_11, G_11, I_11}, + {0, H_10, G_10, I_10}, + {0, H_9, G_9, I_9}, + {0, H_8, G_8, I_8}, + {0, H_7, G_7, I_7}, + {0, H_6, G_6, I_6}, + {0, H_5, G_5, I_5}, + {0, H_4, G_4, I_4}, + {0, H_3, G_3, I_3}, + {0, H_2, G_2, I_2}, + {0, H_1, G_1, I_1}, + + {0, H_13, G_13, I_13}, + {0, H_14, G_14, I_14}, + + {0, E_12, D_12, F_12}, + {0, E_11, D_11, F_11}, + {0, E_10, D_10, F_10}, + {0, E_9, D_9, F_9}, + {0, E_8, D_8, F_8}, + {0, E_7, D_7, F_7}, + {0, E_6, D_6, F_6}, + {0, E_5, D_5, F_5}, + {0, E_4, D_4, F_4}, + {0, E_3, D_3, F_3}, + {0, E_2, D_2, F_2}, + {0, E_1, D_1, F_1}, + + {0, E_13, D_13, F_13}, + {0, E_14, D_14, F_14}, + + {0, B_12, A_12, C_12}, + {0, B_11, A_11, C_11}, + {0, B_10, A_10, C_10}, + {0, B_9, A_9, C_9}, + {0, B_8, A_8, C_8}, + {0, B_7, A_7, C_7}, + {0, B_6, A_6, C_6}, + {0, B_5, A_5, C_5}, + {0, B_4, A_4, C_4}, + {0, B_3, A_3, C_3}, + {0, B_2, A_2, C_2}, + {0, B_1, A_1, C_1} + +}; + +const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { + + {{0|(11<<4)}, {20.36*11, 0}, 1}, + {{0|(10<<4)}, {20.36*10, 0}, 1}, + {{0|(9<<4)}, {20.36*9, 0}, 1}, + {{0|(8<<4)}, {20.36*8, 0}, 1}, + {{0|(7<<4)}, {20.36*7, 0}, 1}, + {{0|(6<<4)}, { 20.36*6, 0}, 1}, + {{0|(5<<4)}, { 20.36*5, 0}, 1}, + {{0|(4<<4)}, { 20.36*4, 0}, 1}, + {{0|(3<<4)}, { 20.36*3, 0}, 1}, + {{0|(2<<4)}, { 20.36*2, 0}, 1}, + {{0|(1<<4)}, { 20.36*1, 0}, 1}, + {{0|(0<<4)}, { 20.36*0, 0}, 1}, + + {{0|(12<<4)}, {20.36*11, 21.33*0.5}, 1}, + {{0|(13<<4)}, {20.36*0,21.33*0.5}, 1}, + + {{1|(11<<4)}, {20.36*11, 21.33}, 1}, + {{1|(10<<4)}, {20.36*10, 21.33}, 0}, + {{1|(9<<4)}, {20.36*9, 21.33}, 0}, + {{1|(8<<4)}, {20.36*8, 21.33}, 0}, + {{1|(7<<4)}, {20.36*7, 21.33}, 0}, + {{1|(6<<4)}, { 20.36*6, 21.33}, 0}, + {{1|(5<<4)}, { 20.36*5, 21.33}, 0}, + {{1|(4<<4)}, { 20.36*4, 21.33}, 0}, + {{1|(3<<4)}, { 20.36*3, 21.33}, 0}, + {{1|(2<<4)}, { 20.36*2, 21.33}, 0}, + {{1|(1<<4)}, { 20.36*1, 21.33}, 0}, + {{1|(0<<4)}, { 20.36*0, 21.33}, 1}, + + {{1|(12<<4)}, {20.36*11, 21.33*1.5}, 1}, + {{1|(13<<4)}, {20.36*0,21.33*1.5}, 1}, + + {{2|(11<<4)}, {20.36*11, 21.33*2}, 1}, + {{2|(10<<4)}, {20.36*10, 21.33*2}, 0}, + {{2|(9<<4)}, {20.36*9, 21.33*2}, 0}, + {{2|(8<<4)}, {20.36*8, 21.33*2}, 0}, + {{2|(7<<4)}, {20.36*7, 21.33*2}, 0}, + {{2|(6<<4)}, { 20.36*6, 21.33*2}, 0}, + {{2|(5<<4)}, { 20.36*5, 21.33*2}, 0}, + {{2|(4<<4)}, { 20.36*4, 21.33*2}, 0}, + {{2|(3<<4)}, { 20.36*3, 21.33*2}, 0}, + {{2|(2<<4)}, { 20.36*2, 21.33*2}, 0}, + {{2|(1<<4)}, { 20.36*1, 21.33*2}, 0}, + {{2|(0<<4)}, { 20.36*0, 21.33*2}, 1}, + + {{2|(12<<4)}, {20.36*11, 21.33*2.5}, 1}, + {{2|(13<<4)}, {20.36*0,21.33*2.5}, 1}, + + {{3|(11<<4)}, {20.36*11, 21.33*3}, 1}, + {{3|(10<<4)}, {20.36*10, 21.33*3}, 1}, + {{3|(9<<4)}, {20.36*9, 21.33*3}, 1}, + {{3|(8<<4)}, {20.36*8, 21.33*3}, 1}, + {{3|(7<<4)}, {20.36*7, 21.33*3}, 1}, + {{3|(6<<4)}, { 20.36*6, 21.33*3}, 1}, + {{3|(5<<4)}, { 20.36*5, 21.33*3}, 1}, + {{3|(4<<4)}, { 20.36*4, 21.33*3}, 1}, + {{3|(3<<4)}, { 20.36*3, 21.33*3}, 1}, + {{3|(2<<4)}, { 20.36*2, 21.33*3}, 1}, + {{3|(1<<4)}, { 20.36*1, 21.33*3}, 1}, + {{3|(0<<4)}, { 20.36*0, 21.33*3}, 1} + +}; +#else +const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { +/* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + {0, K_12, J_12, L_12}, + {0, K_11, J_11, L_11}, + {0, K_10, J_10, L_10}, + {0, K_9, J_9, L_9}, + {0, K_8, J_8, L_8}, + {0, K_7, J_7, L_7}, + {0, K_6, J_6, L_6}, + {0, K_5, J_5, L_5}, + {0, K_4, J_4, L_4}, + {0, K_3, J_3, L_3}, + {0, K_2, J_2, L_2}, + {0, K_1, J_1, L_1}, + + {0, K_13, J_13, L_13}, + {0, K_14, J_14, L_14}, + + {0, H_12, G_12, I_12}, + {0, H_11, G_11, I_11}, + {0, H_10, G_10, I_10}, + {0, H_9, G_9, I_9}, + {0, H_8, G_8, I_8}, + {0, H_7, G_7, I_7}, + {0, H_6, G_6, I_6}, + {0, H_5, G_5, I_5}, + {0, H_4, G_4, I_4}, + {0, H_3, G_3, I_3}, + {0, H_2, G_2, I_2}, + {0, H_1, G_1, I_1}, + + {0, H_13, G_13, I_13}, + {0, H_14, G_14, I_14}, + + {0, E_12, D_12, F_12}, + {0, E_11, D_11, F_11}, + {0, E_10, D_10, F_10}, + {0, E_9, D_9, F_9}, + {0, E_8, D_8, F_8}, + {0, E_7, D_7, F_7}, + {0, E_6, D_6, F_6}, + {0, E_5, D_5, F_5}, + {0, E_4, D_4, F_4}, + {0, E_3, D_3, F_3}, + {0, E_2, D_2, F_2}, + {0, E_1, D_1, F_1}, + + {0, E_13, D_13, F_13}, + {0, E_14, D_14, F_14}, + + {0, B_12, A_12, C_12}, + {0, B_11, A_11, C_11}, + {0, B_10, A_10, C_10}, + {0, B_9, A_9, C_9}, + {0, B_8, A_8, C_8}, + {0, B_13, A_13, C_13}, + {0, B_5, A_5, C_5}, + {0, B_4, A_4, C_4}, + {0, B_3, A_3, C_3}, + {0, B_2, A_2, C_2}, + {0, B_1, A_1, C_1} + +}; + +const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { + + {{0|(11<<4)}, {20.36*11, 0}, 1}, + {{0|(10<<4)}, {20.36*10, 0}, 1}, + {{0|(9<<4)}, {20.36*9, 0}, 1}, + {{0|(8<<4)}, {20.36*8, 0}, 1}, + {{0|(7<<4)}, {20.36*7, 0}, 1}, + {{0|(6<<4)}, { 20.36*6, 0}, 1}, + {{0|(5<<4)}, { 20.36*5, 0}, 1}, + {{0|(4<<4)}, { 20.36*4, 0}, 1}, + {{0|(3<<4)}, { 20.36*3, 0}, 1}, + {{0|(2<<4)}, { 20.36*2, 0}, 1}, + {{0|(1<<4)}, { 20.36*1, 0}, 1}, + {{0|(0<<4)}, { 20.36*0, 0}, 1}, + + {{0|(12<<4)}, {20.36*11, 21.33*0.5}, 1}, + {{0|(13<<4)}, {20.36*0,21.33*0.5}, 1}, + + {{1|(11<<4)}, {20.36*11, 21.33}, 1}, + {{1|(10<<4)}, {20.36*10, 21.33}, 0}, + {{1|(9<<4)}, {20.36*9, 21.33}, 0}, + {{1|(8<<4)}, {20.36*8, 21.33}, 0}, + {{1|(7<<4)}, {20.36*7, 21.33}, 0}, + {{1|(6<<4)}, { 20.36*6, 21.33}, 0}, + {{1|(5<<4)}, { 20.36*5, 21.33}, 0}, + {{1|(4<<4)}, { 20.36*4, 21.33}, 0}, + {{1|(3<<4)}, { 20.36*3, 21.33}, 0}, + {{1|(2<<4)}, { 20.36*2, 21.33}, 0}, + {{1|(1<<4)}, { 20.36*1, 21.33}, 0}, + {{1|(0<<4)}, { 20.36*0, 21.33}, 1}, + + {{1|(12<<4)}, {20.36*11, 21.33*1.5}, 1}, + {{1|(13<<4)}, {20.36*0,21.33*1.5}, 1}, + + {{2|(11<<4)}, {20.36*11, 21.33*2}, 1}, + {{2|(10<<4)}, {20.36*10, 21.33*2}, 0}, + {{2|(9<<4)}, {20.36*9, 21.33*2}, 0}, + {{2|(8<<4)}, {20.36*8, 21.33*2}, 0}, + {{2|(7<<4)}, {20.36*7, 21.33*2}, 0}, + {{2|(6<<4)}, { 20.36*6, 21.33*2}, 0}, + {{2|(5<<4)}, { 20.36*5, 21.33*2}, 0}, + {{2|(4<<4)}, { 20.36*4, 21.33*2}, 0}, + {{2|(3<<4)}, { 20.36*3, 21.33*2}, 0}, + {{2|(2<<4)}, { 20.36*2, 21.33*2}, 0}, + {{2|(1<<4)}, { 20.36*1, 21.33*2}, 0}, + {{2|(0<<4)}, { 20.36*0, 21.33*2}, 1}, + + {{2|(12<<4)}, {20.36*11, 21.33*2.5}, 1}, + {{2|(13<<4)}, {20.36*0,21.33*2.5}, 1}, + + {{3|(11<<4)}, {20.36*11, 21.33*3}, 1}, + {{3|(10<<4)}, {20.36*10, 21.33*3}, 1}, + {{3|(9<<4)}, {20.36*9, 21.33*3}, 1}, + {{3|(8<<4)}, {20.36*8, 21.33*3}, 1}, + {{3|(7<<4)}, {20.36*7, 21.33*3}, 1}, + {{3|(6<<4)}, { 20.36*5.5, 21.33*3}, 1}, + {{3|(4<<4)}, { 20.36*4, 21.33*3}, 1}, + {{3|(3<<4)}, { 20.36*3, 21.33*3}, 1}, + {{3|(2<<4)}, { 20.36*2, 21.33*3}, 1}, + {{3|(1<<4)}, { 20.36*1, 21.33*3}, 1}, + {{3|(0<<4)}, { 20.36*0, 21.33*3}, 1} + +}; +#endif + + +void matrix_init_kb(void) { + matrix_init_user(); +} + + +void matrix_scan_kb(void) { + matrix_scan_user(); +} + + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + return process_record_user(keycode, record); +} + + +void suspend_power_down_kb(void) +{ + rgb_matrix_set_suspend_state(true); +} + +void suspend_wakeup_init_kb(void) +{ + rgb_matrix_set_suspend_state(false); +} diff --git a/keyboards/dztech/dz40rgb/dz40rgb.h b/keyboards/dztech/dz40rgb/dz40rgb.h new file mode 100644 index 0000000000..5f88a6225a --- /dev/null +++ b/keyboards/dztech/dz40rgb/dz40rgb.h @@ -0,0 +1,27 @@ +#pragma once +#include "quantum.h" +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k36, k37, k38, k39, k3a, k3b \ +) \ +{ \ + { k |