summaryrefslogtreecommitdiffstats
path: root/keyboards
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards')
-rw-r--r--keyboards/massdrop/alt/config.h51
-rw-r--r--keyboards/massdrop/alt/matrix.c6
-rw-r--r--keyboards/massdrop/ctrl/config.h51
-rw-r--r--keyboards/massdrop/ctrl/matrix.c6
4 files changed, 104 insertions, 10 deletions
diff --git a/keyboards/massdrop/alt/config.h b/keyboards/massdrop/alt/config.h
index a486f34a0c..660d44421b 100644
--- a/keyboards/massdrop/alt/config.h
+++ b/keyboards/massdrop/alt/config.h
@@ -32,17 +32,64 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROWS 5
#define MATRIX_COLS 15
+/* MCU Port name definitions */
#define PA 0
#define PB 1
+/* Port and Pin definition of key row hardware configuration */
#define MATRIX_ROW_PORTS PA, PA, PA, PA, PA
#define MATRIX_ROW_PINS 0, 1, 2, 3, 4
+/* Port and Pin definition of key column hardware configuration */
#define MATRIX_COL_PORTS PB, PB, PB, PB, PB, PB, PB, PB, PB, PB, PA, PA, PA, PA, PA
#define MATRIX_COL_PINS 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 5, 6, 7, 10, 11
-/* Print boot debug codes using debug LED when M28 and M30 shorted */
-#define DEBUG_BOOT_TRACING
+/* This Shift Register expands available hardware output lines to control additional peripherals */
+/* It uses four lines from the MCU to provide 16 output lines */
+/* Shift Register Clock configuration (MCU to ShiftRegister.RCLK) */
+#define SR_EXP_RCLK_PORT PB
+#define SR_EXP_RCLK_PIN 14
+/* Shift Register Output Enable configuration (MCU to ShiftRegister.OE_N) */
+#define SR_EXP_OE_N_PORT PB
+#define SR_EXP_OE_N_PIN 15
+/* SERCOM port to use for Shift Register SPI */
+/* DATAOUT and SCLK must be configured to use hardware pins of this port */
+#define SR_EXP_SERCOM SERCOM2
+/* Shift Register SPI Data Out configuration (MCU.SERCOMx.PAD[0] to ShiftRegister.SER) */
+#define SR_EXP_DATAOUT_PORT PA
+#define SR_EXP_DATAOUT_PIN 12
+#define SR_EXP_DATAOUT_MUX 2
+/* Shift Register SPI Serial Clock configuration (MCU.SERCOMx.PAD[1] to ShiftRegister.SRCLK) */
+#define SR_EXP_SCLK_PORT PA
+#define SR_EXP_SCLK_PIN 13
+#define SR_EXP_SCLK_MUX 2
+
+/* Debug LED (Small LED Located near MCU) */
+#define DEBUG_LED_ENABLE 1
+#define DEBUG_LED_PORT PA
+#define DEBUG_LED_PIN 27
+
+/* Additional debugging ports */
+/* PCB M21 */
+#define DEBUG_PORT1_ENABLE 1
+#define DEBUG_PORT1_PORT PB
+#define DEBUG_PORT1_PIN 3
+/* PCB M23 */
+#define DEBUG_PORT2_ENABLE 1
+#define DEBUG_PORT2_PORT PB
+#define DEBUG_PORT2_PIN 17
+/* PCB M25 */
+#define DEBUG_PORT3_ENABLE 1
+#define DEBUG_PORT3_PORT PA
+#define DEBUG_PORT3_PIN 20
+
+/* Debug Boot Tracing - During boot sequence, ground this pin to halt and display debug code using Debug LED */
+/* This is useful in determining which hardware device may have malfunctioned or is improperly configured */
+/* Feature is automatically disabled after successful boot */
+/* PCB M27 */
+#define DEBUG_BOOT_TRACING_ENABLE 1
+#define DEBUG_BOOT_TRACING_PORT PB
+#define DEBUG_BOOT_TRACING_PIN 23
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
diff --git a/keyboards/massdrop/alt/matrix.c b/keyboards/massdrop/alt/matrix.c
index 75a4d62b99..892d38791c 100644
--- a/keyboards/massdrop/alt/matrix.c
+++ b/keyboards/massdrop/alt/matrix.c
@@ -75,7 +75,7 @@ void matrix_init(void)
PORT->Group[col_ports[col]].DIRSET.reg = 1 << col_pins[col]; //Output
PORT->Group[col_ports[col]].OUTCLR.reg = 1 << col_pins[col]; //Low
}
-
+
matrix_init_quantum();
}
@@ -91,7 +91,7 @@ uint8_t matrix_scan(void)
if (CLK_get_ms() < mdebouncing) return 1; //mdebouncing == 0 when no debouncing active
- //m15_off; //Profiling scans
+ //DBG_1_OFF; //Profiling scans
memset(mlatest, 0, MATRIX_ROWS * sizeof(matrix_row_t)); //Zero the result buffer
@@ -135,7 +135,7 @@ uint8_t matrix_scan(void)
mdebouncing = CLK_get_ms() + DEBOUNCING_DELAY;
}
- //m15_on; //Profiling scans
+ //DBG_1_ON; //Profiling scans
matrix_scan_quantum();
diff --git a/keyboards/massdrop/ctrl/config.h b/keyboards/massdrop/ctrl/config.h
index 1ab7f93cdd..31eccda87d 100644
--- a/keyboards/massdrop/ctrl/config.h
+++ b/keyboards/massdrop/ctrl/config.h
@@ -32,17 +32,64 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROWS 11
#define MATRIX_COLS 8
+/* MCU Port name definitions */
#define PA 0
#define PB 1
+/* Port and Pin definition of key row hardware configuration */
#define MATRIX_ROW_PORTS PB, PB, PB, PB, PB, PB, PA, PA, PB, PB, PB
#define MATRIX_ROW_PINS 4, 5, 6, 7, 8, 9, 10, 11, 10, 11, 12
+/* Port and Pin definition of key column hardware configuration */
#define MATRIX_COL_PORTS PA, PA, PA, PA, PA, PA, PA, PA
#define MATRIX_COL_PINS 0, 1, 2, 3, 4, 5, 6, 7
-/* Print boot debug codes using debug LED when M28 and M30 shorted */
-#define DEBUG_BOOT_TRACING
+/* This Shift Register expands available hardware output lines to control additional peripherals */
+/* It uses four lines from the MCU to provide 16 output lines */
+/* Shift Register Clock configuration (MCU to ShiftRegister.RCLK) */
+#define SR_EXP_RCLK_PORT PB
+#define SR_EXP_RCLK_PIN 14
+/* Shift Register Output Enable configuration (MCU to ShiftRegister.OE_N) */
+#define SR_EXP_OE_N_PORT PB
+#define SR_EXP_OE_N_PIN 15
+/* SERCOM port to use for Shift Register SPI */
+/* DATAOUT and SCLK must be configured to use hardware pins of this port */
+#define SR_EXP_SERCOM SERCOM2
+/* Shift Register SPI Data Out configuration (MCU.SERCOMx.PAD[0] to ShiftRegister.SER) */
+#define SR_EXP_DATAOUT_PORT PA
+#define SR_EXP_DATAOUT_PIN 12
+#define SR_EXP_DATAOUT_MUX 2
+/* Shift Register SPI Serial Clock configuration (MCU.SERCOMx.PAD[1] to ShiftRegister.SRCLK) */
+#define SR_EXP_SCLK_PORT PA
+#define SR_EXP_SCLK_PIN 13
+#define SR_EXP_SCLK_MUX 2
+
+/* Debug LED (Small LED Located near MCU) */
+#define DEBUG_LED_ENABLE 1
+#define DEBUG_LED_PORT PA
+#define DEBUG_LED_PIN 27
+
+/* Additional debugging ports */
+/* PCB M21 */
+#define DEBUG_PORT1_ENABLE 1
+#define DEBUG_PORT1_PORT PB
+#define DEBUG_PORT1_PIN 3
+/* PCB M23 */
+#define DEBUG_PORT2_ENABLE 1
+#define DEBUG_PORT2_PORT PB
+#define DEBUG_PORT2_PIN 17
+/* PCB M25 */
+#define DEBUG_PORT3_ENABLE 1
+#define DEBUG_PORT3_PORT PA
+#define DEBUG_PORT3_PIN 20
+
+/* Debug Boot Tracing - During boot sequence, ground this pin to halt and display debug code using Debug LED */
+/* This is useful in determining which hardware device may have malfunctioned or is improperly configured */
+/* Feature is automatically disabled after successful boot */
+/* PCB M27 */
+#define DEBUG_BOOT_TRACING_ENABLE 1
+#define DEBUG_BOOT_TRACING_PORT PB
+#define DEBUG_BOOT_TRACING_PIN 23
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
diff --git a/keyboards/massdrop/ctrl/matrix.c b/keyboards/massdrop/ctrl/matrix.c
index 6f306962e6..3580577dc1 100644
--- a/keyboards/massdrop/ctrl/matrix.c
+++ b/keyboards/massdrop/ctrl/matrix.c
@@ -75,7 +75,7 @@ void matrix_init(void)
PORT->Group[col_ports[col]].DIRSET.reg = 1 << col_pins[col]; //Output
PORT->Group[col_ports[col]].OUTCLR.reg = 1 << col_pins[col]; //Low
}
-
+
matrix_init_quantum();
}
@@ -91,7 +91,7 @@ uint8_t matrix_scan(void)
if (CLK_get_ms() < mdebouncing) return 1; //mdebouncing == 0 when no debouncing active
- //m15_off; //Profiling scans
+ //DBG_1_OFF; //Profiling scans
memset(mlatest, 0, MATRIX_ROWS * sizeof(matrix_row_t)); //Zero the result buffer
@@ -135,7 +135,7 @@ uint8_t matrix_scan(void)
mdebouncing = CLK_get_ms() + DEBOUNCING_DELAY;
}
- //m15_on; //Profiling scans
+ //DBG_1_ON; //Profiling scans
matrix_scan_quantum();
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 23:22:24 +0000