diff options
Diffstat (limited to 'keyboards')
| -rwxr-xr-x | keyboards/amj40/Makefile | 3 | ||||
| -rwxr-xr-x | keyboards/amj40/amj40.c | 30 | ||||
| -rwxr-xr-x | keyboards/amj40/amj40.h | 38 | ||||
| -rwxr-xr-x | keyboards/amj40/config.h | 94 | ||||
| -rwxr-xr-x | keyboards/amj40/keymaps/default/Makefile | 27 | ||||
| -rwxr-xr-x | keyboards/amj40/keymaps/default/build.sh | 42 | ||||
| -rwxr-xr-x | keyboards/amj40/keymaps/default/keymap.c | 173 | ||||
| -rwxr-xr-x | keyboards/amj40/keymaps/default/readme.md | 11 | ||||
| -rwxr-xr-x | keyboards/amj40/keymaps/default/updatemerge.sh | 4 | ||||
| -rwxr-xr-x | keyboards/amj40/readme.md | 35 | ||||
| -rwxr-xr-x | keyboards/amj40/rules.mk | 66 |
11 files changed, 523 insertions, 0 deletions
diff --git a/keyboards/amj40/Makefile b/keyboards/amj40/Makefile new file mode 100755 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/amj40/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/amj40/amj40.c b/keyboards/amj40/amj40.c new file mode 100755 index 0000000000..5a23769991 --- /dev/null +++ b/keyboards/amj40/amj40.c @@ -0,0 +1,30 @@ +#include "amj40.h" +#include "led.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + led_init_ports(); +}; + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + matrix_scan_user(); +}; + +void led_init_ports(void) { + // * Set our LED pins as output + DDRB |= (1<<2); +} + +void led_set_kb(uint8_t usb_led) { + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // Turn capslock on + PORTB &= ~(1<<2); + } else { + // Turn capslock off + PORTB |= (1<<2); + } +} diff --git a/keyboards/amj40/amj40.h b/keyboards/amj40/amj40.h new file mode 100755 index 0000000000..ab629cba7f --- /dev/null +++ b/keyboards/amj40/amj40.h @@ -0,0 +1,38 @@ +#ifndef AMJ40_H +#define AMJ40_H + +#include "quantum.h" + +// readability +#define XXX KC_NO + +/* AMJ40 ver2.0 layout1 配列一 + * ,-----------------------------------------------------------. + * | 00 | 01 | 02 | 03 | 04 | 05 | 06 | 07 | 08 | 09 | 0A | 0B | + * |-----------------------------------------------------------| + * | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 1B | + * |-----------------------------------------------------------| + * | 20 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 2A | 2B | + * |-----------------------------------------------------------| + * | 30 | 31 | 32 | 34 | 35 | 39 | 3A | 3B | + * `-----------------------------------------------------------' + */ +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1b, \ + k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k34, k35, k39, k3a, k3b \ +) { \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, XXX, k1b}, \ + {k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b}, \ + {k30, k31, k32, XXX, k34, k35, XXX, XXX, XXX, k39, k3a, k3b} \ +} + + + + +void matrix_init_user(void); +void matrix_scan_user(void); + +#endif diff --git a/keyboards/amj40/config.h b/keyboards/amj40/config.h new file mode 100755 index 0000000000..4110111223 --- /dev/null +++ b/keyboards/amj40/config.h @@ -0,0 +1,94 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6072 +#define DEVICE_VER 0x0002 +#define MANUFACTURER Han Chen +#define PRODUCT AMJ40 +#define DESCRIPTION qmk port of AMJ40 v2 PCB + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +// ROWS: Top to bottom, COLS: Left to right + +#define MATRIX_ROW_PINS { F4, F5, F6, F7} +#define MATRIX_COL_PINS { F1, F0, E6, C7, C6, B0, D4, B1, B7, B5, B4, D7} +#define UNUSED_PINS + +#define BACKLIGHT_PIN B6 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* Backlight configuration + */ +#define BACKLIGHT_LEVELS 4 + +/* Underlight configuration + */ + +#define RGB_DI_PIN D3 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 4 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/amj40/keymaps/default/Makefile b/keyboards/amj40/keymaps/default/Makefile new file mode 100755 index 0000000000..034e697bc2 --- /dev/null +++ b/keyboards/amj40/keymaps/default/Makefile @@ -0,0 +1,27 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +#define ws2812_PORTREG PORTD +#define ws2812_DDRREG DDRD + + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/amj40/keymaps/default/build.sh b/keyboards/amj40/keymaps/default/build.sh new file mode 100755 index 0000000000..6b4b4568f5 --- /dev/null +++ b/keyboards/amj40/keymaps/default/build.sh @@ -0,0 +1,42 @@ +#!/bin/bash +# adjust for cpu +# -j 16 gave best result on a hyperthreaded quad core core i7 + +LIMIT=10 +THREADS="-j 16" +KMAP=iso_split_rshift + +echo "We need sudo later" +sudo ls 2>&1 /dev/null + +function wait_bootloader { + echo "Waiting for Bootloader..." + local STARTTIME=$(date +"%s") + local REMIND=0 + local EXEC=dfu-programmer + local TARGET=atmega32u4 + while true + do + sudo $EXEC $TARGET get > /dev/null 2>&1 + [ $? -eq 0 ] && break + ENDTIME=$(date +"%s") + DURATION=$(($ENDTIME-$STARTTIME)) + if [ $REMIND -eq 0 -a $DURATION -gt $LIMIT ] + then + echo "Did you forget to press the reset button?" + REMIND=1 + fi + sleep 1 + done +} +make clean +make KEYMAP=${KMAP} ${THREADS} +if [[ $? -eq 0 ]] +then + echo "please trigger flashing!" + wait_bootloader + sudo make KEYMAP=${KMAP} dfu ${THREADS} +else + echo "make failed" + exit 77 +fi diff --git a/keyboards/amj40/keymaps/default/keymap.c b/keyboards/amj40/keymaps/default/keymap.c new file mode 100755 index 0000000000..13b48c2ada --- /dev/null +++ b/keyboards/amj40/keymaps/default/keymap.c @@ -0,0 +1,173 @@ + + +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "amj40.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _LOWER 1 +#define _RAISE 2 +#define _ADJUST 3 + + + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + ADJUST, +}; + + + + + +// increase readability +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Default Layer + * ,-----------------------------------------------------------. + * | Esc| Q | W | E | R | T | Y | U | I | O | P | BS | + * |-----------------------------------------------------------| + * | Tab | A | S | D | F | G | H | J | K | L | Ent | + * |-----------------------------------------------------------| + * | LSft | Z | X | C | V | B | N | M | , | . | /? | + * |-----------------------------------------------------------| + * | LCtl | LGui| LAlt| spc fn0 | spc fn1 |fn2|RAlt|RCtl | + * `-----------------------------------------------------------' + */ + [_QWERTY] = KEYMAP( \ + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,\ + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT,\ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,\ + KC_LCTL, KC_LGUI, KC_LALT, F(0), F(1), F(2), KC_RALT, KC_RCTL \ + ), + + /* Function Layer 1 HHKB style + * ,-----------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bkspc| + * |-----------------------------------------------------------| + * | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | [ | ] | Pipe | + * |-----------------------------------------------------------| + * | F7 | F8 | F9 | F10 | F11 | F12 | End|PgDn| ↓ | | | + * |-----------------------------------------------------------| + * | | | | | | Stop| App| | + * `-----------------------------------------------------------' + */ + [_LOWER] = KEYMAP( \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),BL_TOGG, BL_INC, BL_DEC, \ + _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ + ), + + /* Function Layer 1 HHKB style + * ,-----------------------------------------------------------. + * |Caps| |MSel| ⏮ | ⏯ | ⏭ |PSCR|SkLk|Paus| ↑ | Ins| Del| + * |-----------------------------------------------------------| + * | | 🔇 | ⏏ | | * | / |Hone|PgUp| ← | → | | + * |-----------------------------------------------------------| + * | | 🔉 | 🔊 | | + | - | End|PgDn| ↓ | | | + * |-----------------------------------------------------------| + * | | | | | | Stop| App| | + * `-----------------------------------------------------------' + */ + [_RAISE] = KEYMAP( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, KC_DEL, \ + _______, KC_TRNS, _______, KC_TRNS, KC_TRNS, _______, _______, RGB_TOG \ + ), + + /* Function Layer 1 HHKB style + * ,-----------------------------------------------------------. + * |Caps| |MSel| ⏮ | ⏯ | ⏭ |PSCR|SkLk|Paus| ↑ | Ins| Del| + * |-----------------------------------------------------------| + * | | 🔇 | ⏏ | | * | / |Hone|PgUp| ← | → | | + * |-----------------------------------------------------------| + * | | 🔉 | 🔊 | | + | - | End|PgDn| ↓ | | | + * |-----------------------------------------------------------| + * | | | | | | Stop| App| | + * `-----------------------------------------------------------' + */ + [_ADJUST] = KEYMAP( \ + _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ + _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, _______, _______, _______, _______, \ + _______, _______, _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, \ + KC_SYSTEM_SLEEP, _______, _______, _______, _______, _______, _______, _______ \ + ), + + + +}; + + + + +enum function_id { + LAUNCH, + RGBLED_TOGGLE, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_TAP_KEY(_LOWER, KC_SPC), + [1] = ACTION_LAYER_TAP_KEY(_RAISE, KC_SPC), + [2] = ACTION_LAYER_TAP_KEY(_ADJUST, KC_LGUI), + +}; + + + + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + + return MACRO_NONE; +}; + + + + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + + switch (keycode) { + + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + } + return true; +} diff --git a/keyboards/amj40/keymaps/default/readme.md b/keyboards/amj40/keymaps/default/readme.md new file mode 100755 index 0000000000..2659292ae5 --- /dev/null +++ b/keyboards/amj40/keymaps/default/readme.md @@ -0,0 +1,11 @@ +AMJ40 Default Layout +===================== + +##Quantum MK Firmware +For the full Quantum feature list, see the parent readme.md. + +# Features +* Based on a combination of the original AMJ40 keymap from the TMK firmware as well as the Planck Ortholinear keyboard's "Lower," "Raise," and "Adjust" layers. +* View the keymap.c file to understand they layout of the keymap. +* Has keys to toggle both the switch LEDs and underglow LEDs. + diff --git a/keyboards/amj40/keymaps/default/updatemerge.sh b/keyboards/amj40/keymaps/default/updatemerge.sh new file mode 100755 index 0000000000..da5457e195 --- /dev/null +++ b/keyboards/amj40/keymaps/default/updatemerge.sh @@ -0,0 +1,4 @@ +#!/bin/bash +git checkout amj60 # gets you on branch amj60 +git fetch origin # gets you up to date with origin +git merge origin/master diff --git a/keyboards/amj40/readme.md b/keyboards/amj40/readme.md new file mode 100755 index 0000000000..e705f20fea --- /dev/null +++ b/keyboards/amj40/readme.md @@ -0,0 +1,35 @@ +AMJ40 keyboard firmware +====================== +DIY/Assembled compact 40% keyboard. + +Ported by N.Hou from the original TMK firmware. + +*Supports both backlight LEDs as well as RGB underglow. + +*For reference, the AMJ40 uses pin D3 for underglow lighting. + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme.md](/readme.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/amj40 +folder. Once your dev env is setup, you'll be able to type `make` to generate +your .hex - you can then use `make dfu` to program your PCB once you hit the +reset button. + +Depending on which keymap you would like to use, you will have to compile +slightly differently. + +### Default +To build with the default keymap, simply run `sudo make all`. +The .hex file will appear in the root of the qmk firmware folder. + + + + +### Original tmk firmware +The original firmware that was used to port to qmk can be found [here](https://github.com/AMJKeyboard/AMJ40). + + diff --git a/keyboards/amj40/rules.mk b/keyboards/amj40/rules.mk new file mode 100755 index 0000000000..18403ac328 --- /dev/null +++ b/keyboards/amj40/rules.mk @@ -0,0 +1,66 @@ + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID |