diff options
Diffstat (limited to 'keyboards')
57 files changed, 2564 insertions, 562 deletions
diff --git a/keyboards/atreus/readme.md b/keyboards/atreus/readme.md index a4077668e3..476d1bce3d 100644 --- a/keyboards/atreus/readme.md +++ b/keyboards/atreus/readme.md @@ -88,7 +88,7 @@ We've added shortcuts to make common modifier/tap (mod-tap) mappings more compac ### Remember: These are just aliases -These functions work the same way that their `ACTION_*` functions do - they're just quick aliases. To dig into all of the tmk ACTION_* functions, please see the [TMK documentation](https://github.com/jackhumbert/qmk_firmware/blob/master/tmk_core/doc/keymap.md#2-action). +These functions work the same way that their `ACTION_*` functions do - they're just quick aliases. To dig into all of the tmk ACTION_* functions, please see the [TMK documentation](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/doc/keymap.md#2-action). Instead of using `FNx` when defining `ACTION_*` functions, you can use `F(x)` - the benefit here is being able to use more than 32 function actions (up to 4096), if you happen to need them. @@ -169,7 +169,7 @@ This requires [some hardware changes](https://www.reddit.com/r/MechanicalKeyboar ## Building -Download or clone the whole firmware and navigate to the keyboards/planck folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use `make dfu` to program your PCB once you hit the reset button. +Download or clone the whole firmware and navigate to the keyboards/atreus folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use `make dfu` to program your PCB once you hit the reset button. Depending on which keymap you would like to use, you will have to compile slightly differently. diff --git a/keyboards/ergodox/ez/config.h b/keyboards/ergodox/ez/config.h index 6a8c66d7d4..e4f95c302c 100644 --- a/keyboards/ergodox/ez/config.h +++ b/keyboards/ergodox/ez/config.h @@ -49,7 +49,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_SAT_STEP 255 #define RGBLIGHT_VAL_STEP 12 -#define RGB_MIDI +// #define RGB_MIDI #define RGBW_BB_TWI #define RGBW 1 diff --git a/keyboards/ergodox/ez/ez.c b/keyboards/ergodox/ez/ez.c index 039e4c6bb1..3e19f23028 100644 --- a/keyboards/ergodox/ez/ez.c +++ b/keyboards/ergodox/ez/ez.c @@ -52,9 +52,9 @@ uint8_t init_mcp23018(void) { // I2C subsystem - uint8_t sreg_prev; - sreg_prev=SREG; - cli(); + // uint8_t sreg_prev; + // sreg_prev=SREG; + // cli(); if (i2c_initialized == 0) { i2c_init(); // on pins D(1,0) i2c_initialized++; @@ -83,7 +83,7 @@ uint8_t init_mcp23018(void) { out: i2c_stop(); - SREG=sreg_prev; + // SREG=sreg_prev; return mcp23018_status; } diff --git a/keyboards/ergodox/keymaps/ab/readme.md b/keyboards/ergodox/keymaps/ab/readme.md index 6b1ac2be35..62e08e1629 100644 --- a/keyboards/ergodox/keymaps/ab/readme.md +++ b/keyboards/ergodox/keymaps/ab/readme.md @@ -8,7 +8,7 @@ Beginner's keymap emulates standard QWERTY keyboard for beginners. Once you get * Easy on beginners. It has everything you need for your day to day usage. #### Cons -* Keys are not ergonomically placed to take full advantage of Ergodox-EZ. Take a look at this [Default Keymap](https://github.com/jackhumbert/qmk_firmware/blob/master/keyboards/ergodox_ez/keymaps/default/readme.md) +* Keys are not ergonomically placed to take full advantage of Ergodox-EZ. Take a look at this [Default Keymap](https://github.com/qmk/qmk_firmware/blob/master/keyboards/ergodox_ez/keymaps/default/readme.md) * While multiple layers are possible, beginner's keymap only uses one additional layer for mouse, function and volume keys. #### Notes diff --git a/keyboards/ergodox/keymaps/algernon/readme.md b/keyboards/ergodox/keymaps/algernon/readme.md index 015bd7cd32..3783eadf16 100644 --- a/keyboards/ergodox/keymaps/algernon/readme.md +++ b/keyboards/ergodox/keymaps/algernon/readme.md @@ -121,10 +121,10 @@ There is a very small tool in `tools/layer-notify`, that listens to the HID cons To make my workflow easier, this layout is maintained in [its own repository][algernon:ez-layout]. To build it, you will need the [QMK][qmk] firmware checked out, and this repo either checked out to something like `keyboards/ergodox_ez/algernon-master`. One way to achieve that is this: [algernon:ez-layout]: https://github.com/algernon/ergodox-layout - [qmk]: https://github.com/jackhumbert/qmk_firmware + [qmk]: https://github.com/qmk/qmk_firmware ``` -$ git clone https://github.com/jackhumbert/qmk_firmware.git +$ git clone https://github.com/qmk/qmk_firmware.git $ cd qmk_firmware $ git clone https://github.com/algernon/ergodox-layout.git \ keyboards/ergodox/keymaps/algernon-master diff --git a/keyboards/ergodox/keymaps/dvorak_programmer/README.md b/keyboards/ergodox/keymaps/dvorak_programmer/README.md index 3e4a2545b8..54da74f7f2 100644 --- a/keyboards/ergodox/keymaps/dvorak_programmer/README.md +++ b/keyboards/ergodox/keymaps/dvorak_programmer/README.md @@ -7,18 +7,23 @@ Layers ------ * BASE: this is where you type. +* SHELL_LAYER: this is a permanent layer which I use when I don't need the F keys and gives me bash shortcuts on the top row. * SHELL_NAV: hold down the Tab key to access shell/terminal navigation shorcuts such as forward/backward word, history, Ctrl+C, screen tab movement. * KEY_NAV: arrow key movement with backward/forward word support, and copy/paste. * KEY_SEL: same as above, but every movement shift-selects. * NUMBER: keypad layer. * SYMBOL: all the symbols. -* BRACKET: special brackets-only layer for programming +* BRACKET: special brackets-only layer for programming. Activated by pressing left capslock (OSL) * SHORTCUTS: sends Hyper keys for Autohotkey to interpret. I use this to switch between specific apps. * MOUSE: use mouse keys Updates ------- +2017/01/22: +* Made brackets toggle an OSL on the left capslock +* Added SHELL_LAYER + 2016/12/10: * toggle for brackets layer is now on left thumb cluster. diff --git a/keyboards/ergodox/keymaps/dvorak_programmer/keymap.c b/keyboards/ergodox/keymaps/dvorak_programmer/keymap.c index f3d02f688d..7ed0c7f125 100644 --- a/keyboards/ergodox/keymaps/dvorak_programmer/keymap.c +++ b/keyboards/ergodox/keymaps/dvorak_programmer/keymap.c @@ -6,7 +6,8 @@ #include "action_code.h" #define BASE 0 // default layer -#define SHELL_NAV 1 +#define SHELL_LAYER 1 +#define SHELL_NAV 2 #define KEY_NAV 3 // key navigation layer #define KEY_SEL 4 // key selection layer #define NUMBER 5 // number layer @@ -58,12 +59,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = KEYMAP( // layer 0 : default // left hand KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, - LT(MOUSE,KC_TAB), KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, MO(KEY_SEL), - MO(SHELL_NAV), KC_A, KC_O, KC_E, KC_U, KC_I, - KC_FN3, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, MO(KEY_NAV), + LT(SHELL_NAV,KC_TAB), KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, MO(KEY_SEL), + OSL(BRACKETS), KC_A, KC_O, KC_E, KC_U, KC_I, + OSM(MOD_LSFT), KC_SCLN, KC_Q, KC_J, KC_K, KC_X, MO(KEY_NAV), OSL(SHORTCUTS),KC_FN4, KC_FN5,OSL(SYMBOL),MO(NUMBER), // thumb cluster - MO(BRACKETS), RCTL(KC_S), + MO(MOUSE), RCTL(KC_S), RCTL(KC_DEL), KC_BSPC,RCTL(KC_BSPC),KC_DEL, // right hand @@ -80,6 +81,33 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), + +// permanent shell layer - meant to be used while in a terminal. only the top keys are overriden +[SHELL_LAYER] = KEYMAP( + // left hand + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,LALT(KC_DOT),RCTL(KC_R),RCTL(KC_C), + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + // bottom row + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + // thumb cluster + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + RCTL(KC_W), LALT(KC_B),LALT(KC_F), KC_LEFT, KC_RIGHT, LALT(KC_D), KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + // bottom row + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + // thumb cluster + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), + // shell navigation layer [SHELL_NAV] = KEYMAP( // left hand @@ -209,12 +237,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BRACKETS] = KEYMAP( // left hand - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,M(OPEN_CLOSE_CURLY), M(OPEN_CLOSE_PAREN),M(OPEN_CLOSE_BRACKET), KC_TRNS,KC_TRNS, + KC_TRNS,KC_LPRN, KC_RPRN, KC_LBRC, KC_RBRC, KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, KC_LCBR, KC_RCBR, KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, // right hand @@ -246,7 +274,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { MEH(KC_S), MEH(KC_T), MEH(KC_U), MEH(KC_V), MEH(KC_X), MEH(KC_6), MEH(KC_7), MEH(KC_8), - MEH(KC_9), MEH(KC_Y), MEH(KC_Z) + MEH(KC_9), TO(BASE), TO(SHELL_LAYER) ), @@ -406,6 +434,8 @@ void matrix_scan_user(void) { switch (layer) { case NUMBER: case SYMBOL: + case BRACKETS: + //case SHELL_LAYER: ergodox_right_led_2_on(); break; case KEY_NAV: diff --git a/keyboards/ergodox/keymaps/german-kinergo/readme.md b/keyboards/ergodox/keymaps/german-kinergo/readme.md index 557d85a8a4..beb74cf750 100644 --- a/keyboards/ergodox/keymaps/german-kinergo/readme.md +++ b/keyboards/ergodox/keymaps/german-kinergo/readme.md @@ -2,7 +2,7 @@ This layout is inspired by the "kinesis-qwerty-mod" from benblazak's [ergodox-firmware](https://github.com/benblazak/ergodox-firmware), as well as by the "german" layout from the -[qmk_firmware](https://github.com/jackhumbert/qmk_firmware). +[qmk_firmware](https://github.com/qmk/qmk_firmware). The goal was to have a layout that is pretty close to an ordinary German keyboard, so I don't have to make adjustments on the operating system level and I keep some of the muscle memory to use a regular keyboard. diff --git a/keyboards/ergodox/keymaps/mclennon_osx/README.md b/keyboards/ergodox/keymaps/mclennon_osx/README.md index 60980d043d..28cdb7c108 100644 --- a/keyboards/ergodox/keymaps/mclennon_osx/README.md +++ b/keyboards/ergodox/keymaps/mclennon_osx/README.md @@ -2,4 +2,4 @@ This keymapping is designed to be reasonably familiar to an ordinary Mac keyboard while taking advantage of the Ergodox EZ's features. Caps lock instead enables a layer which allows a user to use HJKL as arrow keys and to control media. Shift and control have additional mappings on S and D to provide easier access while holding down caps lock. -If you choose to compile this yourself, be sure to compile with `#define PREVENT_STUCK_MODIFIERS` in your `config.h`. Firmware built using [qmk_firmware](https://github.com/jackhumbert/qmk_firmware/). +If you choose to compile this yourself, be sure to compile with `#define PREVENT_STUCK_MODIFIERS` in your `config.h`. Firmware built using [qmk_firmware](https://github.com/qmk/qmk_firmware/). diff --git a/keyboards/ergodox/keymaps/pvinis/Readme.md b/keyboards/ergodox/keymaps/pvinis/Readme.md index 2a4a0c8f3d..af27210541 100644 --- a/keyboards/ergodox/keymaps/pvinis/Readme.md +++ b/keyboards/ergodox/keymaps/pvinis/Readme.md @@ -59,7 +59,7 @@ I have two commented out layers that are just templates, so I can easily create # Building ``` -$ git clone https://github.com/jackhumbert/qmk_firmware.git +$ git clone https://github.com/qmk/qmk_firmware.git $ cd qmk_firmware/keyboards/ergodox/keymaps/pvinis $ make ``` diff --git a/keyboards/ergodox/keymaps/supercoder/readme.md b/keyboards/ergodox/keymaps/supercoder/readme.md index 8ef96eddf6..df39ac7a94 100644 --- a/keyboards/ergodox/keymaps/supercoder/readme.md +++ b/keyboards/ergodox/keymaps/supercoder/readme.md @@ -22,7 +22,7 @@ your own: [hex]: https://raw.githubusercontent.com/algernon/ergodox-supercoder/master/supercoder.hex ``` -$ git clone https://github.com/jackhumbert/qmk_firmware.git +$ git clone https://github.com/qmk/qmk_firmware.git $ cd qmk_firmware/keyboards/ergodox $ git clone https://github.com/algernon/ergodox-supercoder.git keymaps/supercoder $ make KEYMAP=supercoder diff --git a/keyboards/ergodox/keymaps/swissgerman/keyboard-layout.json b/keyboards/ergodox/keymaps/swissgerman/keyboard-layout.json new file mode 100644 index 0000000000..6958952b48 --- /dev/null +++ b/keyboards/ergodox/keymaps/swissgerman/keyboard-layout.json @@ -0,0 +1,419 @@ +[ + { + "backcolor": "#ffffff", + "name": "Ergodox Swiss German Layout - Base Layer", + "author": "Andreas Schmidt (https://github.com/remigius42)" + }, + [ + { + "x": 3.5 + }, + "#\n3", + { + "x": 10.5 + }, + "*\n8" + ], + [ + { + "y": -0.875, + "x": 2.5 + }, + "@\n2", + { + "x": 1 + }, + "$\n4", + { + "x": 8.5 + }, + "&\n7", + { + "x": 1 + }, + "(\n9" + ], + [ + { + "y": -0.875, + "x": 5.5 + }, + "%\n5", + { + "a": 7 + }, + "<i class='fa fa-arrow-left'></i>", + { + "x": 4.5 + }, + "<i class='fa fa-arrow-right'></i>", + { + "a": 4 + }, + "^\n6" + ], + [ + { + "y": -0.875, + "w": 1.5 + }, + "°\n§", + "!\n1", + { + "x": 14.5 + }, + ")\n0", + { + "w": 1.5 + }, + "?\n'\n\n'" + ], + [ + { + "y": -0.375, + "x": 3.5 + }, + "E", + { + "x": 10.5 + }, + "I" + ], + [ + { + "y": -0.875, + "x": 2.5 + }, + "W", + { + "x": 1 + }, + "R", + { + "x": 8.5 + }, + "U", + { + "x": 1 + }, + "O" + ], + [ + { + "y": -0.875, + "x": 5.5 + }, + "T", + { + "c": "#b56b6b", + "a": 6, + "h": 1.5 + }, + "Toggle Code Layer", + { + "x": 4.5, + "h": 1.5 + }, + "Toggle Code Layer", + { + "c": "#cccccc", + "a": 4 + }, + "Y" + ], + [ + { + "y": -0.875, + "a": 6, + "w": 1.5 + }, + "Delete", + { + "a": 4 + }, + "Q", + { + "x": 14.5 + }, + "P", + { + "w": 1.5 + }, + "è\nü\n\n[" + ], + [ + { + "y": -0.375, + "x": 3.5 + }, + "D", + { + "x": 10.5 + }, + "K" + ], + [ + { + "y": -0.875, + "x": 2.5 + }, + "S", + { + "x": 1 + }, + "F", + { + "x": 8.5 + }, + "J", + { + "x": 1 + }, + "L" + ], + [ + { + "y": -0.875, + "x": 5.5 + }, + "G", + { + "x": 6.5 + }, + "H" + ], + [ + { + "y": -0.875, + "a": 6, + "w": 1.5 + }, + "Backspace", + { + "c": "#79c777", + "a": 4 + }, + "A\n\nLyr3", + { + "x": 14.5 + }, + "é\nö\nLyr3", + { + "c": "#748adb", + "w": 1.5 + }, + "à\nä\nCmd\n{" + ], + [ + { + "y": -0.625, + "x": 6.5, + "c": "#cccccc", + "a": 6, + "h": 1.5 + }, + "Hyper", + { + "x": 4.5, + "h": 1.5 + }, + "Meh" + ], + [ + { + "y": -0.75, + "x": 3.5, + "a": 4 + }, + "C", + { + "x": 10.5 + }, + ";\n," + ], + [ + { + "y": -0.875, + "x": 2.5, + "c": "#748adb" + }, + "X\n\nAlt", + { + "x": 1, + "c": "#cccccc" + }, + "V", + { + "x": 8.5 + }, + "M", + { + "x": 1, + "c": "#748adb" + }, + ":\n.\nAlt" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#cccccc" + }, + "B", + { + "x": 6.5 + }, + "N" + ], + [ + { + "y": -0.875, + "a": 6, + "w": 1.5 + }, |