diff options
Diffstat (limited to 'keyboards')
| -rw-r--r-- | keyboards/cannonkeys/satisfaction75/i2c_master.c | 46 | ||||
| -rw-r--r-- | keyboards/sol/common/glcdfont.c | 140 | ||||
| -rw-r--r-- | keyboards/sol/common/ssd1306.c | 329 | ||||
| -rw-r--r-- | keyboards/sol/common/ssd1306.h | 92 | ||||
| -rw-r--r-- | keyboards/sol/i2c.c | 162 | ||||
| -rw-r--r-- | keyboards/sol/i2c.h | 49 | ||||
| -rwxr-xr-x | keyboards/sol/keymaps/brianweyer/config.h | 2 | ||||
| -rwxr-xr-x | keyboards/sol/keymaps/brianweyer/keymap.c | 146 | ||||
| -rwxr-xr-x | keyboards/sol/keymaps/brianweyer/rules.mk | 14 | ||||
| -rw-r--r-- | keyboards/sol/keymaps/danielhklein/keymap.c | 145 | ||||
| -rw-r--r-- | keyboards/sol/keymaps/danielhklein/rules.mk | 8 | ||||
| -rw-r--r-- | keyboards/sol/keymaps/default/keymap.c | 145 | ||||
| -rw-r--r-- | keyboards/sol/keymaps/default/rules.mk | 8 | ||||
| -rw-r--r-- | keyboards/sol/keymaps/kageurufu/rules.mk | 7 | ||||
| -rw-r--r-- | keyboards/sol/rev1/config.h | 6 | ||||
| -rw-r--r-- | keyboards/sol/rev1/rev1.c | 7 | ||||
| -rw-r--r-- | keyboards/sol/rev1/split_util.h | 2 | ||||
| -rw-r--r-- | keyboards/sol/rules.mk | 7 |
18 files changed, 271 insertions, 1044 deletions
diff --git a/keyboards/cannonkeys/satisfaction75/i2c_master.c b/keyboards/cannonkeys/satisfaction75/i2c_master.c index d81eb92d49..ce0e0a7ba1 100644 --- a/keyboards/cannonkeys/satisfaction75/i2c_master.c +++ b/keyboards/cannonkeys/satisfaction75/i2c_master.c @@ -29,8 +29,6 @@ #include "quantum.h" #include <string.h> #include <hal.h> -#include "chtypes.h" -#include "ch.h" static uint8_t i2c_address; @@ -44,6 +42,18 @@ static const I2CConfig i2cconfig = { 0 }; +static i2c_status_t chibios_to_qmk(const msg_t* status) { + switch (*status) { + case I2C_NO_ERROR: + return I2C_STATUS_SUCCESS; + case I2C_TIMEOUT: + return I2C_STATUS_TIMEOUT; + // I2C_BUS_ERROR, I2C_ARBITRATION_LOST, I2C_ACK_FAILURE, I2C_OVERRUN, I2C_PEC_ERROR, I2C_SMB_ALERT + default: + return I2C_STATUS_ERROR; + } +} + __attribute__ ((weak)) void i2c_init(void) { @@ -59,34 +69,32 @@ void i2c_init(void) //i2cInit(); //This is invoked by halInit() so no need to redo it. } -// This is usually not needed -uint8_t i2c_start(uint8_t address) +i2c_status_t i2c_start(uint8_t address) { i2c_address = address; i2cStart(&I2C_DRIVER, &i2cconfig); - return 0; + return I2C_STATUS_SUCCESS; } -uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) +i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) { - msg_t status = MSG_OK; - i2c_address = address; i2cStart(&I2C_DRIVER, &i2cconfig); i2cAcquireBus(&I2C_DRIVER); - status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, MS2ST(timeout)); + msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, MS2ST(timeout)); i2cReleaseBus(&I2C_DRIVER); - return status; + return chibios_to_qmk(&status); } -uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) +i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) { i2c_address = address; i2cStart(&I2C_DRIVER, &i2cconfig); - return i2cMasterReceiveTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, MS2ST(timeout)); + msg_t status = i2cMasterReceiveTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, MS2ST(timeout)); + return chibios_to_qmk(&status); } -uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) +i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) { i2c_address = devaddr; i2cStart(&I2C_DRIVER, &i2cconfig); @@ -98,19 +106,19 @@ uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t l } complete_packet[0] = regaddr; - return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, MS2ST(timeout)); + msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, MS2ST(timeout)); + return chibios_to_qmk(&status); } -uint8_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout) +i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout) { i2c_address = devaddr; i2cStart(&I2C_DRIVER, &i2cconfig); - return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), regaddr, 1, data, length, MS2ST(timeout)); + msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), regaddr, 1, data, length, MS2ST(timeout)); + return chibios_to_qmk(&status); } -// This is usually not needed. It releases the driver to allow pins to become GPIO again. -uint8_t i2c_stop(void) +void i2c_stop(void) { i2cStop(&I2C_DRIVER); - return 0; } diff --git a/keyboards/sol/common/glcdfont.c b/keyboards/sol/common/glcdfont.c index 89665ba074..f772e31811 100644 --- a/keyboards/sol/common/glcdfont.c +++ b/keyboards/sol/common/glcdfont.c @@ -1,8 +1,4 @@ -// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0. -// See gfxfont.h for newer custom bitmap font info. - -#ifndef FONT5X7_H -#define FONT5X7_H +#pragma once #ifdef __AVR__ #include <avr/io.h> @@ -13,7 +9,8 @@ #define PROGMEM #endif -// Standard ASCII 5x7 font +// Helidox 8x6 font with RGBKB SOL Logo +// Online editor: http://teripom.x0.com/ static const unsigned char font[] PROGMEM = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, @@ -144,27 +141,27 @@ static const unsigned char font[] PROGMEM = { 0x00, 0x41, 0x36, 0x08, 0x00, 0x00, 0x02, 0x01, 0x02, 0x04, 0x02, 0x00, 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00, - 0x03, 0x07, 0x1F, 0x7F, 0xFF, 0xFF, - 0xFE, 0xF8, 0xF0, 0xC0, 0x20, 0xF8, - 0xFE, 0xFF, 0xFE, 0x79, 0x27, 0x1F, - 0x7F, 0xFF, 0xFF, 0xFE, 0xF8, 0xF0, - 0xC0, 0x20, 0xF8, 0xFE, 0xFF, 0xFF, - 0x7F, 0x3F, 0x3F, 0x7F, 0xFF, 0xFE, - 0xF8, 0xF0, 0xC0, 0x00, 0x00, 0x00, - 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xFF, 0x7F, 0x7F, 0x7F, - 0xBF, 0xBF, 0xC0, 0xC0, 0xC0, 0xE0, - 0xE0, 0xE0, 0xE0, 0xF0, 0xF0, 0xF0, - 0xF8, 0x78, 0x78, 0x7C, 0x3C, 0x3C, - 0xFE, 0xFE, 0xFE, 0xFF, 0xFF, 0xFF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, + 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, - 0xBF, 0xBF, 0xDF, 0xDF, 0xEF, 0xEF, - 0x00, 0x03, 0x07, 0x1F, 0x7F, 0xFF, - 0xFF, 0xFF, 0xFE, 0xF8, 0xE0, 0xC0, - 0xE0, 0xF8, 0xFE, 0xFF, 0xFF, 0xFF, - 0x7F, 0x1F, 0x07, 0x03, 0x00, 0x00, + 0x80, 0x80, 0x80, 0x80, 0x80, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x80, 0x00, 0x00, 0x0C, 0x90, + 0xB0, 0xE0, 0x72, 0x31, 0x9B, 0xDE, + 0xCE, 0xEC, 0xEE, 0xE9, 0xE9, 0xEC, + 0xCF, 0xDA, 0x99, 0x3E, 0x62, 0xE4, + 0xC4, 0x70, 0x10, 0x10, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, + 0xC0, 0xC0, 0x80, 0x80, 0x02, 0x85, + 0x85, 0x87, 0x85, 0x89, 0x89, 0x92, + 0xEA, 0xC6, 0xC4, 0x48, 0x50, 0x60, + 0x40, 0x40, 0x40, 0x40, 0xC0, 0xE0, + 0x50, 0x28, 0x10, 0x10, 0x60, 0xC0, + 0x40, 0x40, 0x40, 0x40, 0x80, 0x80, + 0x80, 0x80, 0x80, 0xE0, 0xF8, 0xFC, + 0xF8, 0xF0, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC, 0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00, 0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E, @@ -173,30 +170,30 @@ static const unsigned char font[] PROGMEM = { 0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00, 0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE, 0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0xC1, 0xF3, - 0xCF, 0xBF, 0x7F, 0xFF, 0xFF, 0xFC, - 0xFB, 0xE7, 0x81, 0x00, 0x00, 0x00, - 0x00, 0x80, 0xE3, 0xCF, 0x3F, 0xFF, - 0xFF, 0xFF, 0xFC, 0xFB, 0xE7, 0x81, - 0x00, 0x00, 0x00, 0x00, 0x81, 0xE7, - 0xFF, 0xFF, 0xFF, 0xFF, 0x3C, 0x00, - 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xF8, 0xF8, 0xFC, 0x7C, 0x7E, - 0x7E, 0x3E, 0xFE, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xF7, 0xF7, 0xF7, 0xFB, - 0xFB, 0x7D, 0x7D, 0x7D, 0xBE, 0xBE, - 0xBE, 0xDF, 0xDF, 0xE0, 0xE0, 0x00, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0x00, 0xFC, 0xFC, 0x7C, 0x7E, 0x7E, - 0x3E, 0x3E, 0x1F, 0x1F, 0x1F, 0x0F, + 0x00, 0x00, 0x00, 0xE0, 0xEC, 0xDF, + 0xFC, 0xE0, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x7F, 0x80, 0x80, + 0x80, 0x70, 0x0F, 0x00, 0x00, 0x80, + 0x7F, 0x00, 0x00, 0x7F, 0x80, 0x80, + 0x80, 0x80, 0x80, 0x80, 0x80, 0x7F, + 0x00, 0x00, 0x80, 0x80, 0x80, 0x80, + 0x80, 0x80, 0x80, 0xFF, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x40, 0x21, 0x33, 0x3B, 0x7B, + 0xFF, 0x00, 0x7C, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x81, - 0xE7, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xE7, 0x81, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xFF, 0xFF, 0xFF, 0xFF, 0x7C, 0x01, + 0xFF, 0xDE, 0x8C, 0x04, 0x0C, 0x08, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x01, 0x01, 0x01, 0x7F, 0x80, + 0x80, 0xBE, 0xBE, 0x80, 0x80, 0x80, + 0xC1, 0xFF, 0x80, 0x04, 0x32, 0x5E, + 0x1C, 0x3D, 0x26, 0x10, 0xC1, 0xFF, + 0x3E, 0x00, 0x00, 0x08, 0x36, 0xC1, + 0x08, 0x08, 0x14, 0x77, 0x94, 0x94, + 0x94, 0xF7, 0x94, 0xF7, 0x9C, 0x9C, + 0xFF, 0xFF, 0x1E, 0x00, 0x00, 0x00, 0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00, 0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F, @@ -205,30 +202,31 @@ static const unsigned char font[] PROGMEM = { 0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00, 0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F, 0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00, + 0x40, 0x7C, 0x3F, 0x3F, 0x23, 0x01, + 0x23, 0x3F, 0x37, 0x6C, 0x40, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x06, 0x02, 0x06, + 0x4D, 0x4F, 0x8C, 0xF9, 0x73, 0x37, + 0x27, 0x2F, 0x2F, 0xAF, 0xEF, 0x6F, + 0x77, 0x17, 0x33, 0x79, 0xCC, 0x1F, + 0x31, 0x20, 0x21, 0x02, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x40, 0xE0, + 0xA0, 0xA0, 0xD0, 0x90, 0x48, 0x48, + 0x25, 0x2B, 0x11, 0x09, 0x05, 0x03, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x03, 0x02, 0x04, 0x03, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, + 0x00, 0x00, 0x00, 0x03, 0x0F, 0x1F, + 0x0F, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x60, 0x70, 0x7C, 0x7F, 0x7F, 0x7F, - 0x7F, 0x1F, 0x06, 0x01, 0x03, 0x0F, - 0x3F, 0x7F, 0x7F, 0x7E, 0x7C, 0x7C, - 0x7E, 0x7F, 0x7F, 0x7F, 0x1F, 0x06, - 0x01, 0x07, 0x0F, 0x3F, 0x7F, 0x7F, - 0x7E, 0x7C, 0x7C, 0x7E, 0x7F, 0x7F, - 0x3F, 0x0F, 0x03, 0x00, 0x00, 0x00, - 0x00, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, - 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7F, 0x7F, 0x7F, 0x7F, - 0x7F, 0x7F, 0x7D, 0x7D, 0x3D, 0x3E, - 0x1E, 0x1F, 0x1F, 0x1F, 0x0F, 0x0F, - 0x07, 0x07, 0x07, 0x03, 0x03, 0x00, - 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, - 0x7C, 0x7C, 0x7C, 0x7C, 0x7C, 0x7C, - 0x7C, 0x7C, 0x7C, 0x7C, 0x7C, 0x00, - 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, - 0x00, 0x40, 0x70, 0x78, 0x7E, 0x7F, - 0x7F, 0x7F, 0x3F, 0x0F, 0x03, 0x01, - 0x03, 0x0F, 0x3F, 0x7F, 0x7F, 0x7F, - 0x7E, 0x78, 0x70, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, @@ -239,6 +237,4 @@ static const unsigned char font[] PROGMEM = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; -#endif // FONT5X7_H diff --git a/keyboards/sol/common/ssd1306.c b/keyboards/sol/common/ssd1306.c deleted file mode 100644 index b3e55a67c2..0000000000 --- a/keyboards/sol/common/ssd1306.c +++ /dev/null @@ -1,329 +0,0 @@ -#ifdef SSD1306OLED - -#include "ssd1306.h" -#include "i2c.h" -#include <string.h> -#include "print.h" -#ifndef LOCAL_GLCDFONT -#include "common/glcdfont.c" -#else -#include <helixfont.h> -#endif -#ifdef ADAFRUIT_BLE_ENABLE -#include "adafruit_ble.h" -#endif -#ifdef PROTOCOL_LUFA -#include "lufa.h" -#endif -#include "sendchar.h" -#include "timer.h" - -// Set this to 1 to help diagnose early startup problems -// when testing power-on with ble. Turn it off otherwise, -// as the latency of printing most of the debug info messes -// with the matrix scan, causing keys to drop. -#define DEBUG_TO_SCREEN 0 - -//static uint16_t last_battery_update; -//static uint32_t vbat; -//#define BatteryUpdateInterval 10000 /* milliseconds */ -#define ScreenOffInterval 300000 /* milliseconds */ -#if DEBUG_TO_SCREEN -static uint8_t displaying; -#endif -static uint16_t last_flush; - -// Write command sequence. -// Returns true on success. -static inline bool _send_cmd1(uint8_t cmd) { - bool res = false; - - if (i2c_start_write(SSD1306_ADDRESS)) { - xprintf("failed to start write to %d\n", SSD1306_ADDRESS); - goto done; - } - - if (i2c_master_write(0x0 /* command byte follows */)) { - print("failed to write control byte\n"); - - goto done; - } - - if (i2c_master_write(cmd)) { - xprintf("failed to write command %d\n", cmd); - goto done; - } - res = true; -done: - i2c_master_stop(); - return res; -} - -// Write 2-byte command sequence. -// Returns true on success -static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) { - if (!_send_cmd1(cmd)) { - return false; - } - return _send_cmd1(opr); -} - -// Write 3-byte command sequence. -// Returns true on success -static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) { - if (!_send_cmd1(cmd)) { - return false; - } - if (!_send_cmd1(opr1)) { - return false; - } - return _send_cmd1(opr2); -} - -#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;} -#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;} -#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;} - -static void clear_display(void) { - matrix_clear(&display); - - // Clear all of the display bits (there can be random noise - // in the RAM on startup) - send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1); - send_cmd3(ColumnAddr, 0, DisplayWidth - 1); - - if (i2c_start_write(SSD1306_ADDRESS)) { - goto done; - } - if (i2c_master_write(0x40)) { - // Data mode - goto done; - } - for (uint8_t row = 0; row < MatrixRows; ++row) { - for (uint8_t col = 0; col < DisplayWidth; ++col) { - i2c_master_write(0); - } - } - - display.dirty = false; - -done: - i2c_master_stop(); -} - -#if DEBUG_TO_SCREEN -#undef sendchar -static int8_t capture_sendchar(uint8_t c) { - sendchar(c); - iota_gfx_write_char(c); - - if (!displaying) { - iota_gfx_flush(); - } - return 0; -} -#endif - -bool iota_gfx_init(bool rotate) { - bool success = false; - - i2c_master_init(); - send_cmd1(DisplayOff); - send_cmd2(SetDisplayClockDiv, 0x80); - send_cmd2(SetMultiPlex, DisplayHeight - 1); - - send_cmd2(SetDisplayOffset, 0); - - - send_cmd1(SetStartLine | 0x0); - send_cmd2(SetChargePump, 0x14 /* Enable */); - send_cmd2(SetMemoryMode, 0 /* horizontal addressing */); - - if(rotate){ - // the following Flip the display orientation 180 degrees - send_cmd1(SegRemap); - send_cmd1(ComScanInc); - }else{ - // Flips the display orientation 0 degrees - send_cmd1(SegRemap | 0x1); - send_cmd1(ComScanDec); - } - - send_cmd2(SetComPins, 0x2); - send_cmd2(SetContrast, 0x8f); - send_cmd2(SetPreCharge, 0xf1); - send_cmd2(SetVComDetect, 0x40); - send_cmd1(DisplayAllOnResume); - send_cmd1(NormalDisplay); - send_cmd1(DeActivateScroll); - send_cmd1(DisplayOn); - - send_cmd2(SetContrast, 0); // Dim - - clear_display(); - - success = true; - - iota_gfx_flush(); - -#if DEBUG_TO_SCREEN - print_set_sendchar(capture_sendchar); -#endif - -done: - return success; -} - -bool iota_gfx_off(void) { - bool success = false; - - send_cmd1(DisplayOff); - success = true; - -done: - return success; -} - -bool iota_gfx_on(void) { - bool success = false; - - send_cmd1(DisplayOn); - success = true; - -done: - return success; -} - -void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) { - *matrix->cursor = c; - ++matrix->cursor; - - if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) { - // We went off the end; scroll the display upwards by one line - memmove(&matrix->display[0], &matrix->display[1], - MatrixCols * (MatrixRows - 1)); - matrix->cursor = &matrix->display[MatrixRows - 1][0]; - memset(matrix->cursor, ' ', MatrixCols); - } -} - -void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) { - matrix->dirty = true; - - if (c == '\n') { - // Clear to end of line from the cursor and then move to the - // start of the next line - uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols; - - while (cursor_col++ < MatrixCols) { - matrix_write_char_inner(matrix, ' '); - } - return; - } - - matrix_write_char_inner(matrix, c); -} - -void iota_gfx_write_char(uint8_t c) { - matrix_write_char(&display, c); -} - -void matrix_write(struct CharacterMatrix *matrix, const char *data) { - const char *end = data + strlen(data); - while (data < end) { - matrix_write_char(matrix, *data); - ++data; - } -} - -void iota_gfx_write(const char *data) { - matrix_write(&display, data); -} - -void matrix_write_P(struct CharacterMatrix *matrix, const char *data) { - while (true) { - uint8_t c = pgm_read_byte(data); - if (c == 0) { - return; - } - matrix_write_char(matrix, c); - ++data; - } -} - -void iota_gfx_write_P(const char *data) { - matrix_write_P(&display, data); -} - -void matrix_clear(struct CharacterMatrix *matrix) { - memset(matrix->display, ' ', sizeof(matrix->display)); - matrix->cursor = &matrix->display[0][0]; - matrix->dirty = true; -} - -void iota_gfx_clear_screen(void) { - matrix_clear(&display); -} - -void matrix_render(struct CharacterMatrix *matrix) { - last_flush = timer_read(); - iota_gfx_on(); -#if DEBUG_TO_SCREEN - ++displaying; -#endif - - // Move to the home position - send_cmd3(PageAddr, 0, MatrixRows - 1); - send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1); - - if (i2c_start_write(SSD1306_ADDRESS)) { - goto done; - } - if (i2c_master_write(0x40)) { - // Data mode - goto done; - } - - for (uint8_t row = 0; row < MatrixRows; ++row) { - for (uint8_t col = 0; col < MatrixCols; ++col) { - const uint8_t *glyph = font + (matrix->display[row][col] * FontWidth); - - for (uint8_t glyphCol = 0; glyphCol < FontWidth; ++glyphCol) { - uint8_t colBits = pgm_read_byte(glyph + glyphCol); - i2c_master_write(colBits); - } - - // 1 column of space between chars (it's not included in the glyph) - //i2c_master_write(0); - } - } - - matrix->dirty = false; - -done: - i2c_master_stop(); -#if DEBUG_TO_SCREEN - --displaying; -#endif -} - -void iota_gfx_flush(void) { - matrix_render(&display); -} - -__attribute__ ((weak)) -void iota_gfx_task_user(void) { -} - -void iota_gfx_task(void) { - iota_gfx_task_user(); - - if (display.dirty) { - iota_gfx_flush(); - } - - if (timer_elapsed(last_flush) > ScreenOffInterval) { - iota_gfx_off(); - } -} -#endif diff --git a/keyboards/sol/common/ssd1306.h b/keyboards/sol/common/ssd1306.h deleted file mode 100644 index 77ce7c211a..0000000000 --- a/keyboards/sol/common/ssd1306.h +++ /dev/null @@ -1,92 +0,0 @@ -#ifndef SSD1306_H -#define SSD1306_H - -#include <stdbool.h> -#include <stdio.h> -#include "pincontrol.h" - -enum ssd1306_cmds { - DisplayOff = 0xAE, - DisplayOn = 0xAF, - - SetContrast = 0x81, - DisplayAllOnResume = 0xA4, - - DisplayAllOn = 0xA5, - NormalDisplay = 0xA6, - InvertDisplay = 0xA7, - SetDisplayOffset = 0xD3, - SetComPins = 0xda, - SetVComDetect = 0xdb, - SetDisplayClockDiv = 0xD5, - SetPreCharge = 0xd9, - SetMultiPlex = 0xa8, - SetLowColumn = 0x00, - SetHighColumn = 0x10, - SetStartLine = 0x40, - - SetMemoryMode = 0x20, - ColumnAddr = 0x21, - PageAddr = 0x22, - - ComScanInc = 0xc0, - ComScanDec = 0xc8, - SegRemap = 0xa0, - SetChargePump = 0x8d, - ExternalVcc = 0x01, - SwitchCapVcc = 0x02, - - ActivateScroll = 0x2f, - DeActivateScroll = 0x2e, - SetVerticalScrollArea = 0xa3, - RightHorizontalScroll = 0x26, - LeftHorizontalScroll = 0x27, - VerticalAndRightHorizontalScroll = 0x29, - VerticalAndLeftHorizontalScroll = 0x2a, -}; - -// Controls the SSD1306 128x32 OLED display via i2c - -#ifndef SSD1306_ADDRESS -#define SSD1306_ADDRESS 0x3C -#endif - -#define DisplayHeight 32 -#define DisplayWidth 128 - -#define FontHeight 8 -#define FontWidth 6 - -#define MatrixRows (DisplayHeight / FontHeight) -#define MatrixCols (DisplayWidth / FontWidth) - -struct CharacterMatrix { - uint8_t display[MatrixRows][MatrixCols]; - uint8_t *cursor; - bool dirty; -}; - -struct CharacterMatrix display; - -bool iota_gfx_init(bool rotate); -void iota_gfx_task(void); -bool iota_gfx_off(void); -bool iota_gfx_on(void); -void iota_gfx_flush(void); -void iota_gfx_write_char(uint8_t c); -void iota_gfx_write(const char *data); -void iota_gfx_write_P(const char *data); -void iota_gfx_clear_screen(void); - -void iota_gfx_task_user(void); - -void matrix_clear(struct CharacterMatrix *matrix); -void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c); -void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c); -void matrix_write(struct CharacterMatrix *matrix, const char *data); -void matrix_write_P(struct CharacterMatrix *matrix, const char *data); -void matrix_render(struct CharacterMatrix *matrix); - - - -#endif diff --git a/keyboards/sol/i2c.c b/keyboards/sol/i2c.c deleted file mode 100644 index 4bee5c6398..0000000000 --- a/keyboards/sol/i2c.c +++ /dev/null @@ -1,162 +0,0 @@ -#include <util/twi.h> -#include <avr/io.h> -#include <stdlib.h> -#include <avr/interrupt.h> -#include <util/twi.h> -#include <stdbool.h> -#include "i2c.h" - -#ifdef USE_I2C - -// Limits the amount of we wait for any one i2c transaction. -// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is -// 9 bits, a single transaction will take around 90μs to complete. -// -// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit -// poll loop takes at least 8 clock cycles to execute -#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 - -#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) - -volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -static volatile uint8_t slave_buffer_pos; -static volatile bool slave_has_register_set = false; - -// Wait for an i2c operation to finish -inline static -void i2c_delay(void) { - uint16_t lim = 0; - while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT) - lim++; - - // easier way, but will wait slightly longer - // _delay_us(100); -} - -// Setup twi to run at 100kHz or 400kHz (see ./i2c.h SCL_CLOCK) -void i2c_master_init(void) { - // no prescaler - TWSR = 0; - // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10. - // Check datasheets for more info. - TWBR = ((F_CPU/SCL_CLOCK)-16)/2; -} - -// Start a transaction with the given i2c slave address. The direction of the -// transfer is set with I2C_READ and I2C_WRITE. -// returns: 0 => success -// 1 => error -uint8_t i2c_master_start(uint8_t address) { - TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA); - - i2c_delay(); - - // check that we started successfully - if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START)) - return 1; - - TWDR = address; - TWCR = (1<<TWINT) | (1<<TWEN); - - i2c_delay(); - - if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) ) - return 1; // slave did not acknowledge - else - return 0; // success -} - - -// Finish the i2c transaction. -void i2c_master_stop(void) { - TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); - - uint16_t lim = 0; - while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT) - lim++; -} - -// Write one byte to the i2c slave. -// returns 0 => slave ACK -// 1 => slave NACK -uint8_t i2c_master_write(uint8_t data) { - TWDR = data; - TWCR = (1<<TWINT) | (1<<TWEN); - - i2c_delay(); - - // check if the slave acknowledged us - return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1; -} - -// Read one byte from the i2c slave. If ack=1 the slave is acknowledged, -// if ack=0 the acknowledge bit is not set. -// returns: byte read from i2c device -uint8_t i2c_master_read(int ack) { - TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA); - - i2c_delay(); - return TWDR; -} - -void i2c_reset_state(void) { - TWCR = 0; -} - -void i2c_slave_init(uint8_t address) { - TWAR = address << 0; // slave i2c address - // TWEN - twi enable - // TWEA - enable address acknowledgement - // TWINT - twi interrupt flag - // TWIE - enable the twi interrupt - TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN); -} - -ISR(TWI_vect); - -ISR(TWI_vect) { - uint8_t ack = 1; - switch(TW_STATUS) { - case TW_SR_SLA_ACK: - // this device has been addressed as a slave receiver - slave_has_register_set = false; - break; - - case TW_SR_DATA_ACK: - // this device has received data as a slave receiver - // The first byte that we receive in this transaction sets the location - // of the read/write location of the slaves memory that it exposes over - // i2c. After that, bytes will be written at slave_buffer_pos, incrementing - // slave_buffer_pos after each write. - if(!slave_has_register_set) { - slave_buffer_pos = TWDR; - // don't acknowledge the master if this memory loctaion is out of bounds - if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) { - ack = 0; - slave_buffer_pos = 0; - } - slave_has_register_set = true; - } else { - i2c_slave_buffer[slave_buffer_pos] = TWDR; - BUFFER_POS_INC(); - } - break; - - case TW_ST_SLA_ACK: - case TW_ST_DATA_ACK: - // master has addressed this device as a slave transmitter and is - // requesting data. - TWDR = i2c_slave_buffer[slave_buffer_pos]; - BUFFER_POS_INC(); - break; - - case TW_BUS_ERROR: // something went wrong, reset twi state - TWCR = 0; - default: - break; - } - // Reset everything, so we are ready for the next TWI interrupt - TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN); -} -#endif diff --git a/keyboards/sol/i2c.h b/keyboards/sol/i2c.h deleted file mode 100644 index 47cf6bd1b2..0000000000 --- a/keyboards/sol/i2c.h +++ /dev/null @@ -1,49 +0,0 @@ -#ifndef I2C_H -#define I2C_H - -#include <stdint.h> - -#ifndef F_CPU -#define F_CPU 16000000UL -#endif - -#define I2C_READ 1 -#define I2C_WRITE 0 - -#define I2C_ACK 1 -#define I2C_NACK 0 - -#define SLAVE_BUFFER_SIZE 0x10 - -// i2c SCL clock frequency 400kHz -#define SCL_CLOCK 400000L - -extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -void i2c_master_init(void); -uint8_t i2c_master_start(uint8_t address); -void i2c_master_stop(void); -uint8_t i2c_master_write(uint8_t data); -uint8_t i2c_master_read(int); -void i2c_reset_state(void); -void i2c_slave_init(uint8_t address); - - -static inline unsigned char i2c_start_read(unsigned char addr) { - return i2c_master_start((addr << 1) | I2C_READ); -} - -static inline unsigned char i2c_start_write(unsigned char addr) { - return i2c_master_start((addr << 1) | I2C_WRITE); -} - -// from SSD1306 scrips -extern unsigned char i2c_rep_start(unsigned char addr); -extern void i2c_start_wait(unsigned char addr); -extern unsigned char i2c_readAck(void); -extern unsigned char i2c_readNak(void); -extern unsigned char i2c_read(unsigned char ack); - -#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); - -#endif diff --git a/keyboards/sol/keymaps/brianweyer/config.h b/keyboards/sol/keymaps/brianweyer/config.h index 87b7dd2ac0..452cdda823 100755 --- a/keyboards/sol/keymaps/brianweyer/config.h +++ b/keyboards/sol/keymaps/brianweyer/config.h @@ -20,8 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define SSD1306OLED - // place overrides here diff --git a/keyboards/sol/keymaps/brianweyer/keymap.c b/keyboards/sol/keymaps/brianweyer/keymap.c index 2259e246d2..9fd6ad6153 100755 --- a/keyboards/sol/keymaps/brianweyer/keymap.c +++ b/keyboards/sol/keymaps/brianweyer/keymap.c @@ -3,9 +3,6 @@ #include "lufa.h" #include "split_util.h" #endif -#ifdef SSD1306OLED - #include "common/ssd1306.h" -#endif extern keymap_config_t keymap_config; @@ -175,38 +172,28 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } void matrix_init_user(void) { - #ifdef RGBLIGHT_ENABLE - RGB_current_mode = rgblight_config.mode; - #endif - //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h - #ifdef SSD1306OLED - iota_gfx_init(!has_usb()); // turns on the display - #endif +#ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; +#endif } -void matrix_scan_user(void) { - #ifdef SSD1306OLED - // led_test_init(); - iota_gfx_task(); // this is what updates the display continuously - #endif -} +// OLED Driver Logic +#ifdef OLED_DRIVER_ENABLE -//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h -#ifdef SSD1306OLED +uint8_t oled_init_user(uint8_t rotation) { + if (!has_usb()) + return OLED_ROTATION_180; // flip 180 for offhand + return rotation; +} -// hook point for 'led_test' keymap -// 'default' keymap's led_test_init() is empty function, do nothing -// 'led_test' keymap's led_test_init() force rgblight_mode_noeeprom(35); -__attribute__ ((weak)) -void led_test_init(void) {} +static void render_logo(void) { + static const char PROGMEM sol_logo[] = { + 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, + 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0 |