diff options
Diffstat (limited to 'keyboards/ymdk_np21/config.h')
| -rw-r--r-- | keyboards/ymdk_np21/config.h | 119 |
1 files changed, 104 insertions, 15 deletions
diff --git a/keyboards/ymdk_np21/config.h b/keyboards/ymdk_np21/config.h index 3796634316..1ea6fb0ce3 100644 --- a/keyboards/ymdk_np21/config.h +++ b/keyboards/ymdk_np21/config.h @@ -19,32 +19,121 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "config_common.h" -#define VENDOR_ID 0x20A0 -#define PRODUCT_ID 0x422D -#define DEVICE_VER 0x0200 -#define MANUFACTURER YMDK -#define PRODUCT NP21 +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x594D // "YM" +#define PRODUCT_ID 0x5021 // "P" 21 +#define DEVICE_VER 0x0200 +#define MANUFACTURER YMDK +#define PRODUCT NP21 -/* matrix size */ +/* key matrix size */ #define MATRIX_ROWS 4 #define MATRIX_COLS 6 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ #define MATRIX_ROW_PINS { B0, B1, B2, B3 } #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5 } -/* COL2ROW or ROW2COL */ +/* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW #define BACKLIGHT_PIN D4 #define BACKLIGHT_LEVELS 12 #define BACKLIGHT_BREATHING -#define TAPPING_TOGGLE 3 - -#define USB_MAX_POWER_CONSUMPTION 100 - -/* RGB underglow */ -// The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards. -// The same pin is used on the JJ40, at least. #define RGBLED_NUM 5 -#define RGB_DI_PIN E2 // NOTE: for PS2AVRGB boards, underglow commands are sent via I2C to 0xB0. +//#define RGBLIGHT_HUE_STEP 8 +//#define RGBLIGHT_SAT_STEP 8 +//#define RGBLIGHT_VAL_STEP 8 +//#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +//#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ #define RGBLIGHT_ANIMATIONS +/*== or choose animations ==*/ +//#define RGBLIGHT_EFFECT_BREATHING +//#define RGBLIGHT_EFFECT_RAINBOW_MOOD +//#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +//#define RGBLIGHT_EFFECT_SNAKE +//#define RGBLIGHT_EFFECT_KNIGHT +//#define RGBLIGHT_EFFECT_CHRISTMAS +//#define RGBLIGHT_EFFECT_STATIC_GRADIENT +//#define RGBLIGHT_EFFECT_RGB_TEST +//#define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//#define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//#define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//#define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 + +#define USB_MAX_POWER_CONSUMPTION 100 |