3 files changed, 7 insertions, 58 deletions
diff --git a/keyboards/xiudi/xd84/config.h b/keyboards/xiudi/xd84/config.h
index 10f24bc977..2c9eaf1b37 100644
--- a/keyboards/xiudi/xd84/config.h
+++ b/keyboards/xiudi/xd84/config.h
@@ -16,7 +16,6 @@
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 6
@@ -38,13 +37,9 @@
 /* COL2ROW, ROW2COL */
 //#define DIODE_DIRECTION COL2ROW
 
-#define LED_CAPS_LOCK_PIN B6
-#define LED_PIN_ON_STATE 0
-
 #define BACKLIGHT_PIN B5
 #define BACKLIGHT_LEVELS 10
 #define BACKLIGHT_ON_STATE 0
-// #define BACKLIGHT_BREATHING
 
 #define RGB_DI_PIN C7
 #define RGBLED_NUM 7
@@ -58,53 +53,12 @@
 #define RGBLIGHT_EFFECT_RGB_TEST
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
-// #ifdef RGB_DI_PIN
-//   #define RGBLIGHT_HUE_STEP 8
-//   #define RGBLIGHT_SAT_STEP 8
-//   #define RGBLIGHT_VAL_STEP 8
-//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -120,7 +74,3 @@
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/xiudi/xd84/info.json b/keyboards/xiudi/xd84/info.json
index 7c02fdeeef..c2fc8fc5d6 100644
--- a/keyboards/xiudi/xd84/info.json
+++ b/keyboards/xiudi/xd84/info.json
@@ -8,6 +8,13 @@
         "pid": "0x8484",
         "device_version": "0.0.1"
     },
+    "indicators": {
+        "caps_lock": "B6",
+        "on_state": 0
+    },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
+    "community_layouts": ["75_ansi", "75_iso"],
     "layouts": {
         "LAYOUT_75_ansi": {
             "layout": [
diff --git a/keyboards/xiudi/xd84/rules.mk b/keyboards/xiudi/xd84/rules.mk
index eb0d120c33..c6c7f4ef93 100644
--- a/keyboards/xiudi/xd84/rules.mk
+++ b/keyboards/xiudi/xd84/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #
@@ -24,5 +18,3 @@ CUSTOM_MATRIX = lite
 VPATH += drivers/gpio
 SRC += pca9555.c matrix.c
 QUANTUM_LIB_SRC += i2c_master.c
-
-LAYOUTS = 75_ansi 75_iso