diff options
Diffstat (limited to 'keyboards/xelus/pachi/rgb/rev1')
-rw-r--r-- | keyboards/xelus/pachi/rgb/rev1/config.h | 115 | ||||
-rw-r--r-- | keyboards/xelus/pachi/rgb/rev1/halconf.h | 27 | ||||
-rw-r--r-- | keyboards/xelus/pachi/rgb/rev1/info.json | 111 | ||||
-rw-r--r-- | keyboards/xelus/pachi/rgb/rev1/mcuconf.h | 28 | ||||
-rw-r--r-- | keyboards/xelus/pachi/rgb/rev1/readme.md | 17 | ||||
-rw-r--r-- | keyboards/xelus/pachi/rgb/rev1/rev1.c | 239 | ||||
-rw-r--r-- | keyboards/xelus/pachi/rgb/rev1/rev1.h | 36 | ||||
-rw-r--r-- | keyboards/xelus/pachi/rgb/rev1/rules.mk | 29 |
8 files changed, 0 insertions, 602 deletions
diff --git a/keyboards/xelus/pachi/rgb/rev1/config.h b/keyboards/xelus/pachi/rgb/rev1/config.h deleted file mode 100644 index 9eda99ed32..0000000000 --- a/keyboards/xelus/pachi/rgb/rev1/config.h +++ /dev/null @@ -1,115 +0,0 @@ -/* Copyright 2021 Harrison Chan (Xelus) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 17 - -/* key matrix pins */ -#define MATRIX_ROW_PINS { B14, B13, B12, B2, A8, B15 } -#define MATRIX_COL_PINS { C13, C14, C15, H0, A0, A1, A2, A3, A4, A5, A6, A7, B0, B1, H1, B10, B11 } - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -// I2C setup -#define I2C1_SCL_PIN B8 -#define I2C1_SDA_PIN B9 -#define I2C1_SCL_PAL_MODE 4 -#define I2C1_SDA_PAL_MODE 4 -#define I2C1_TIMINGR_PRESC 0U -#define I2C1_TIMINGR_SCLDEL 7U -#define I2C1_TIMINGR_SDADEL 0U -#define I2C1_TIMINGR_SCLH 45U -#define I2C1_TIMINGR_SCLL 149U - -// I2C EEPROM -#define EEPROM_I2C_24LC64 - -// More EEPROM for layers -#define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 8191 - -// RGB Matrix defines -#define DRIVER_ADDR_1 0b0110000 - -#define DRIVER_COUNT 1 -#define DRIVER_1_LED_TOTAL 117 -#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL -#define ISSI_DRIVER_TOTAL DRIVER_LED_TOTAL - -#define RGB_MATRIX_STARTUP_VAL 80 -#define RGB_MATRIX_FRAMEBUFFER_EFFECTS -#define RGB_MATRIX_KEYPRESSES -#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended -#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL - -#define ENABLE_RGB_MATRIX_ALPHAS_MODS -#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN -#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT -#define ENABLE_RGB_MATRIX_BREATHING -#define ENABLE_RGB_MATRIX_BAND_SAT -#define ENABLE_RGB_MATRIX_BAND_VAL -#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL -#define ENABLE_RGB_MATRIX_CYCLE_ALL -#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN -#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN -#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL -#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL -#define ENABLE_RGB_MATRIX_DUAL_BEACON -#define ENABLE_RGB_MATRIX_RAINBOW_BEACON -#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS -#define ENABLE_RGB_MATRIX_RAINDROPS -#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -#define ENABLE_RGB_MATRIX_HUE_BREATHING -#define ENABLE_RGB_MATRIX_HUE_PENDULUM -#define ENABLE_RGB_MATRIX_HUE_WAVE -#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL -#define ENABLE_RGB_MATRIX_PIXEL_RAIN - -#define ENABLE_RGB_MATRIX_TYPING_HEATMAP -#define ENABLE_RGB_MATRIX_DIGITAL_RAIN - -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -#define ENABLE_RGB_MATRIX_SPLASH -#define ENABLE_RGB_MATRIX_MULTISPLASH -#define ENABLE_RGB_MATRIX_SOLID_SPLASH -#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH - -#define FORCE_NKRO diff --git a/keyboards/xelus/pachi/rgb/rev1/halconf.h b/keyboards/xelus/pachi/rgb/rev1/halconf.h deleted file mode 100644 index 633d94a880..0000000000 --- a/keyboards/xelus/pachi/rgb/rev1/halconf.h +++ /dev/null @@ -1,27 +0,0 @@ -/* Copyright 2020 QMK - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -/* - * This file was auto-generated by: - * `qmk chibios-confmigrate -i keyboards/xelus/kangaroo/halconf.h -r platforms/chibios/common/configs/halconf.h` - */ - -#pragma once - -#define HAL_USE_I2C TRUE - -#include_next <halconf.h> - diff --git a/keyboards/xelus/pachi/rgb/rev1/info.json b/keyboards/xelus/pachi/rgb/rev1/info.json deleted file mode 100644 index 24b6c4834a..0000000000 --- a/keyboards/xelus/pachi/rgb/rev1/info.json +++ /dev/null @@ -1,111 +0,0 @@ -{ - "keyboard_name": "Pachi RGB Rev 1", - "manufacturer": "Xelus", - "url": "", - "maintainer": "Xelus22", - "usb": { - "vid": "0x5845", - "pid": "0x5052", - "device_version": "0.0.1" - }, - "layout_aliases": { - "LAYOUT_ansi_tsangan": "LAYOUT_tkl_ansi_tsangan" - }, - "layouts": { - "LAYOUT_tkl_ansi_tsangan": { - "layout": [ - {"label":"Esc", "x":0, "y":0}, - {"label":"F1", "x":2, "y":0}, - {"label":"F2", "x":3, "y":0}, - {"label":"F3", "x":4, "y":0}, - {"label":"F4", "x":5, "y":0}, - {"label":"F5", "x":6.5, "y":0}, - {"label":"F6", "x":7.5, "y":0}, - {"label":"F7", "x":8.5, "y":0}, - {"label":"F8", "x":9.5, "y":0}, - {"label":"F9", "x":11, "y":0}, - {"label":"F10", "x":12, "y":0}, - {"label":"F11", "x":13, "y":0}, - {"label":"F12", "x":14, "y":0}, - {"label":"Print Screen", "x":15.25, "y":0}, - {"label":"Scroll Lock", "x":16.25, "y":0}, - {"label":"Pause", "x":17.25, "y":0}, - - {"label":"`~", "x":0, "y":1.25}, - {"label":"1!", "x":1, "y":1.25}, - {"label":"2@", "x":2, "y":1.25}, - {"label":"3#", "x":3, "y":1.25}, - {"label":"4$", "x":4, "y":1.25}, - {"label":"5%", "x":5, "y":1.25}, - {"label":"6^", "x":6, "y":1.25}, - {"label":"7&", "x":7, "y":1.25}, - {"label":"8*", "x":8, "y":1.25}, - {"label":"9(", "x":9, "y":1.25}, - {"label":"0)", "x":10, "y":1.25}, - {"label":"-_", "x":11, "y":1.25}, - {"label":"=+", "x":12, "y":1.25}, - {"label":"Backspace", "x":13, "y":1.25, "w":2}, - {"label":"Insert", "x":15.25, "y":1.25}, - {"label":"Home", "x":16.25, "y":1.25}, - {"label":"Page Up", "x":17.25, "y":1.25}, - - {"label":"Tab", "x":0, "y":2.25, "w":1.5}, - {"label":"Q", "x":1.5, "y":2.25}, - {"label":"W", "x":2.5, "y":2.25}, - {"label":"E", "x":3.5, "y":2.25}, - {"label":"R", "x":4.5, "y":2.25}, - {"label":"T", "x":5.5, "y":2.25}, - {"label":"Y", "x":6.5, "y":2.25}, - {"label":"U", "x":7.5, "y":2.25}, - {"label":"I", "x":8.5, "y":2.25}, - {"label":"O", "x":9.5, "y":2.25}, - {"label":"P", "x":10.5, "y":2.25}, - {"label":"[{", "x":11.5, "y":2.25}, - {"label":"]}", "x":12.5, "y":2.25}, - {"label":"\\|", "x":13.5, "y":2.25, "w":1.5}, - {"label":"Delete", "x":15.25, "y":2.25}, - {"label":"End", "x":16.25, "y":2.25}, - {"label":"Page Down", "x":17.25, "y":2.25}, - - {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, - {"label":"A", "x":1.75, "y":3.25}, - {"label":"S", "x":2.75, "y":3.25}, - {"label":"D", "x":3.75, "y":3.25}, - {"label":"F", "x":4.75, "y":3.25}, - {"label":"G", "x":5.75, "y":3.25}, - {"label":"H", "x":6.75, "y":3.25}, - {"label":"J", "x":7.75, "y":3.25}, - {"label":"K", "x":8.75, "y":3.25}, - {"label":"L", "x":9.75, "y":3.25}, - {"label":";:", "x":10.75, "y":3.25}, - {"label":"'\"", "x":11.75, "y":3.25}, - {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, - - {"label":"Shift", "x":0, "y":4.25, "w":2.25}, - {"label":"Z", "x":2.25, "y":4.25}, - {"label":"X", "x":3.25, "y":4.25}, - {"label":"C", "x":4.25, "y":4.25}, - {"label":"V", "x":5.25, "y":4.25}, - {"label":"B", "x":6.25, "y":4.25}, - {"label":"N", "x":7.25, "y":4.25}, - {"label":"M", "x":8.25, "y":4.25}, - {"label":",<", "x":9.25, "y":4.25}, - {"label":".>", "x":10.25, "y":4.25}, - {"label":"/?", "x":11.25, "y":4.25}, - {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, - {"label":"\u2191", "x":16, "y":4.25}, - - {"label":"Ctrl", "x":0, "y":5.25, "w":1.5}, - {"label":"GUI", "x":1.5, "y":5.25}, - {"label":"Alt", "x":2.5, "y":5.25, "w":1.5}, - {"label":"Space", "x":4, "y":5.25, "w":7}, - {"label":"Alt", "x":11, "y":5.25, "w":1.5}, - {"label":"GUI", "x":12.5, "y":5.25}, - {"label":"Ctrl", "x":13.5, "y":5.25, "w":1.5}, - {"label":"\u2190", "x":15, "y":5.25}, - {"label":"\u2193", "x":16, "y":5.25}, - {"label":"\u2192", "x":17, "y":5.25} - ] - } - } -} diff --git a/keyboards/xelus/pachi/rgb/rev1/mcuconf.h b/keyboards/xelus/pachi/rgb/rev1/mcuconf.h deleted file mode 100644 index 20db196d29..0000000000 --- a/keyboards/xelus/pachi/rgb/rev1/mcuconf.h +++ /dev/null @@ -1,28 +0,0 @@ -/* Copyright 2020 QMK - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -/* - * This file was auto-generated by: - * `qmk chibios-confmigrate -i keyboards/xelus/kangaroo/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` - */ - -#pragma once - -#include_next <mcuconf.h> - -#undef STM32_I2C_USE_I2C1 -#define STM32_I2C_USE_I2C1 TRUE - diff --git a/keyboards/xelus/pachi/rgb/rev1/readme.md b/keyboards/xelus/pachi/rgb/rev1/readme.md deleted file mode 100644 index 2fa775255a..0000000000 --- a/keyboards/xelus/pachi/rgb/rev1/readme.md +++ /dev/null @@ -1,17 +0,0 @@ -# Pachi RGB Rev 1 - -Pachi RGB Rev 1 TKL Keyboard that is a per-key RGB, hotswap, ANSI and tsangan. - -* Keyboard Maintainer: [Xelus22](https://github.com/Xelus22) -* Hardware Supported: Group buys - -Make example for this keyboard (after setting up your build environment): - - make xelus/pachi/rgb/rev1:default - -Reset your keyboard in 3 ways: -* Software reset on Fn + Backspace -* Bootmagic reset: hold down the top left key (usually escape) and plugin the keyboard -* Physical reset button: on the back of the PCB, there should be a small golden button you can press - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/xelus/pachi/rgb/rev1/rev1.c b/keyboards/xelus/pachi/rgb/rev1/rev1.c deleted file mode 100644 index 7074265009..0000000000 --- a/keyboards/xelus/pachi/rgb/rev1/rev1.c +++ /dev/null @@ -1,239 +0,0 @@ -/* Copyright 2021 Harrison Chan (Xelus) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "rev1.h" - -// tested and working -void matrix_io_delay(void) { __asm__ volatile("nop\nnop\nnop\n"); } - -#ifdef RGB_MATRIX_ENABLE -#include "i2c_master.h" -#include "drivers/led/issi/is31fl3741.h" -const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { -/* Refer to IS31 manual for these locations - * driver - * | R location - * | | G location - * | | | B location - * | | | | */ - {0, CS39_SW1, CS38_SW1, CS37_SW1}, //A1 - {0, CS36_SW1, CS35_SW1, CS34_SW1}, //A2 - {0, CS33_SW1, CS32_SW1, CS31_SW1}, //A3 - {0, CS30_SW1, CS29_SW1, CS28_SW1}, //A4 - {0, CS27_SW1, CS26_SW1, CS25_SW1}, //A5 - {0, CS24_SW1, CS23_SW1, CS22_SW1}, //A6 - {0, CS21_SW1, CS20_SW1, CS19_SW1}, //A7 - {0, CS18_SW1, CS17_SW1, CS16_SW1}, //A8 - {0, CS15_SW1, CS14_SW1, CS13_SW1}, //A9 - {0, CS12_SW1, CS11_SW1, CS10_SW1}, //A10 - {0, CS9_SW1 , CS8_SW1 , CS7_SW1 }, //A11 - {0, CS6_SW1 , CS5_SW1 , CS4_SW1 }, //A12 - {0, CS3_SW1 , CS2_SW1 , CS1_SW1 }, //A13 - - {0, CS39_SW2, CS38_SW2, CS37_SW2}, //B1 - {0, CS36_SW2, CS35_SW2, CS34_SW2}, //B2 - {0, CS33_SW2, CS32_SW2, CS31_SW2}, //B3 - {0, CS30_SW2, CS29_SW2, CS28_SW2}, //B4 - {0, CS27_SW2, CS26_SW2, CS25_SW2}, //B5 - {0, CS24_SW2, CS23_SW2, CS22_SW2}, //B6 - {0, CS21_SW2, CS20_SW2, CS19_SW2}, //B7 - {0, CS18_SW2, CS17_SW2, CS16_SW2}, //B8 - {0, CS15_SW2, CS14_SW2, CS13_SW2}, //B9 - {0, CS12_SW2, CS11_SW2, CS10_SW2}, //B10 - {0, CS9_SW2 , CS8_SW2 , CS7_SW2 }, //B11 - {0, CS6_SW2 , CS5_SW2 , CS4_SW2 }, //B12 - {0, CS3_SW2 , CS2_SW2 , CS1_SW2 }, //B13 - - {0, CS39_SW3, CS38_SW3, CS37_SW3}, //C1 - {0, CS36_SW3, CS35_SW3, CS34_SW3}, //C2 - {0, CS33_SW3, CS32_SW3, CS31_SW3}, //C3 - {0, CS30_SW3, CS29_SW3, CS28_SW3}, //C4 - {0, CS27_SW3, CS26_SW3, CS25_SW3}, //C5 - {0, CS24_SW3, CS23_SW3, CS22_SW3}, //C6 - {0, CS21_SW3, CS20_SW3, CS19_SW3}, //C7 - {0, CS18_SW3, CS17_SW3, CS16_SW3}, //C8 - {0, CS15_SW3, CS14_SW3, CS13_SW3}, //C9 - {0, CS12_SW3, CS11_SW3, CS10_SW3}, //C10 - {0, CS9_SW3 , CS8_SW3 , CS7_SW3 }, //C11 - {0, CS6_SW3 , CS5_SW3 , CS4_SW3 }, //C12 - {0, CS3_SW3 , CS2_SW3 , CS1_SW3 }, //C13 - - {0, CS39_SW4, CS38_SW4, CS37_SW4}, //D1 - {0, CS36_SW4, CS35_SW4, CS34_SW4}, //D2 - {0, CS33_SW4, CS32_SW4, CS31_SW4}, //D3 - {0, CS30_SW4, CS29_SW4, CS28_SW4}, //D4 - {0, CS27_SW4, CS26_SW4, CS25_SW4}, //D5 - {0, CS24_SW4, CS23_SW4, CS22_SW4}, //D6 - {0, CS21_SW4, CS20_SW4, CS19_SW4}, //D7 - {0, CS18_SW4, CS17_SW4, CS16_SW4}, //D8 - {0, CS15_SW4, CS14_SW4, CS13_SW4}, //D9 - {0, CS12_SW4, CS11_SW4, CS10_SW4}, //D10 - {0, CS9_SW4 , CS8_SW4 , CS7_SW4 }, //D11 - {0, CS6_SW4 , CS5_SW4 , CS4_SW4 }, //D12 - {0, CS3_SW4 , CS2_SW4 , CS1_SW4 }, //D13 - - {0, CS39_SW5, CS38_SW5, CS37_SW5}, //E1 - {0, CS36_SW5, CS35_SW5, CS34_SW5}, //E2 - {0, CS33_SW5, CS32_SW5, CS31_SW5}, //E3 - {0, CS30_SW5, CS29_SW5, CS28_SW5}, //E4 - {0, CS27_SW5, CS26_SW5, CS25_SW5}, //E5 - {0, CS24_SW5, CS23_SW5, CS22_SW5}, //E6 - {0, CS21_SW5, CS20_SW5, CS19_SW5}, //E7 - {0, CS18_SW5, CS17_SW5, CS16_SW5}, //E8 - {0, CS15_SW5, CS14_SW5, CS13_SW5}, //E9 - {0, CS12_SW5, CS11_SW5, CS10_SW5}, //E10 - {0, CS9_SW5 , CS8_SW5 , CS7_SW5 }, //E11 - {0, CS6_SW5 , CS5_SW5 , CS4_SW5 }, //E12 - {0, CS3_SW5 , CS2_SW5 , CS1_SW5 }, //E13 - - {0, CS39_SW6, CS38_SW6, CS37_SW6}, //F1 - {0, CS36_SW6, CS35_SW6, CS34_SW6}, //F2 - {0, CS33_SW6, CS32_SW6, CS31_SW6}, //F3 - {0, CS30_SW6, CS29_SW6, CS28_SW6}, //F4 - {0, CS27_SW6, CS26_SW6, CS25_SW6}, //F5 - {0, CS24_SW6, CS23_SW6, CS22_SW6}, //F6 - {0, CS21_SW6, CS20_SW6, CS19_SW6}, //F7 - {0, CS18_SW6, CS17_SW6, CS16_SW6}, //F8 - {0, CS15_SW6, CS14_SW6, CS13_SW6}, //F9 - {0, CS12_SW6, CS11_SW6, CS10_SW6}, //F10 - {0, CS9_SW6 , CS8_SW6 , CS7_SW6 }, //F11 - {0, CS6_SW6 , CS5_SW6 , CS4_SW6 }, //F12 - {0, CS3_SW6 , CS2_SW6 , CS1_SW6 }, //F13 - - {0, CS39_SW7, CS38_SW7, CS37_SW7}, //G1 - {0, CS36_SW7, CS35_SW7, CS34_SW7}, //G2 - {0, CS33_SW7, CS32_SW7, CS31_SW7}, //G3 - {0, CS30_SW7, CS29_SW7, CS28_SW7}, //G4 - {0, CS27_SW7, CS26_SW7, CS25_SW7}, //G5 - {0, CS24_SW7, CS23_SW7, CS22_SW7}, //G6 - {0, CS21_SW7, CS20_SW7, CS19_SW7}, //G7 - {0, CS18_SW7, CS17_SW7, CS16_SW7}, //G8 - {0, CS15_SW7, CS14_SW7, CS13_SW7}, //G9 - {0, CS12_SW7, CS11_SW7, CS10_SW7}, //G10 - {0, CS9_SW7 , CS8_SW7 , CS7_SW7 }, //G11 - {0, CS6_SW7 , CS5_SW7 , CS4_SW7 }, //G12 - {0, CS3_SW7 , CS2_SW7 , CS1_SW7 }, //G13 - - {0, CS39_SW8, CS38_SW8, CS37_SW8}, //H1 - {0, CS36_SW8, CS35_SW8, CS34_SW8}, //H2 - {0, CS33_SW8, CS32_SW8, CS31_SW8}, //H3 - {0, CS30_SW8, CS29_SW8, CS28_SW8}, //H4 - {0, CS27_SW8, CS26_SW8, CS25_SW8}, //H5 - {0, CS24_SW8, CS23_SW8, CS22_SW8}, //H6 - {0, CS21_SW8, CS20_SW8, CS19_SW8}, //H7 - {0, CS18_SW8, CS17_SW8, CS16_SW8}, //H8 - {0, CS15_SW8, CS14_SW8, CS13_SW8}, //H9 - {0, CS12_SW8, CS11_SW8, CS10_SW8}, //H10 - {0, CS9_SW8 , CS8_SW8 , CS7_SW8 }, //H11 - {0, CS6_SW8 , CS5_SW8 , CS4_SW8 }, //H12 - {0, CS3_SW8 , CS2_SW8 , CS1_SW8 }, //H13 - - {0, CS39_SW9, CS38_SW9, CS37_SW9}, //I1 - {0, CS36_SW9, CS35_SW9, CS34_SW9}, //I2 - {0, CS33_SW9, CS32_SW9, CS31_SW9}, //I3 - {0, CS30_SW9, CS29_SW9, CS28_SW9}, //I4 - {0, CS27_SW9, CS26_SW9, CS25_SW9}, //I5 - {0, CS24_SW9, CS23_SW9, CS22_SW9}, //I6 - {0, CS21_SW9, CS20_SW9, CS19_SW9}, //I7 - {0, CS18_SW9, CS17_SW9, CS16_SW9}, //I8 - {0, CS15_SW9, CS14_SW9, CS13_SW9}, //I9 - {0, CS12_SW9, CS11_SW9, CS10_SW9}, //I10 - {0, CS9_SW9 , CS8_SW9 , CS7_SW9 }, //I11 - {0, CS6_SW9 , CS5_SW9 , CS4_SW9 }, //I12 - {0, CS3_SW9 , CS2_SW9 , CS1_SW9 } //I13 -}; - -__attribute__ ((weak)) -led_config_t g_led_config = { { - { -1+00+3 , NO_LED, -1+26+3 , -1+39+3 , -1+52+3 , -1+65+3 , -1+78+3 , -1+91+3 , -1+104+3 , -1+00+1 , -1+13+1 , -1+26+1 , -1+39+1 , -1+52+1 , -1+65+1 , -1+78+1 , -1+91+1 }, - { -1+00+4 , -1+13+4 , -1+26+4 , -1+39+4 , -1+52+4 , -1+65+4 , -1+78+4 , -1+91+4 , -1+104+4 , -1+00+2 , -1+13+2 , -1+26+2 , -1+39+2 , -1+52+2 , -1+65+2 , -1+78+2 , -1+91+2 }, - { -1+00+6 , -1+13+6 , -1+26+6 , -1+39+6 , -1+52+6 , -1+65+6 , -1+78+6 , -1+91+6 , -1+104+6 , -1+00+5 , -1+13+5 , -1+26+5 , -1+39+5 , -1+52+5 , -1+65+5 , -1+78+5 , -1+91+6 }, - { -1+00+8 , -1+13+8 , -1+26+8 , -1+39+8 , -1+52+8 , -1+65+8 , -1+78+8 , -1+91+8 , -1+104+8 , -1+00+7 , -1+13+7 , -1+26+7 , NO_LED , -1+52+7 , NO_LED , NO_LED , NO_LED }, - { -1+00+11, -1+13+11, -1+26+11, -1+39+11, -1+52+11, -1+65+11, -1+78+11, -1+91+11, -1+104+11, -1+00+10, -1+13+10, NO_LED , -1+52+10, NO_LED , NO_LED , -1+78+10, NO_LED }, - { -1+00+9 , -1+13+9 , -1+26+9 , NO_LED , NO_LED , -1+65+9 , NO_LED , NO_LED , NO_LED , NO_LED , -1+13+12, NO_LED , -1+39+12, -1+52+12, -1+65+12, -1+78+12, -1+91+12} -}, { - {123, 0}, {117, 15}, {0 , 0}, {0 , 15}, {123, 27}, {3 , 27}, {127, 40}, {5 , 40}, {2 , 64}, {133, 52}, {8 , 52}, {131, 64}, {255,255}, - {143, 0}, {130, 15}, {255,255}, {13 , 15}, {136, 27}, {19 , 27}, {140, 40}, {23 , 40}, {18 , 64}, {146, 52}, {29 , 52}, {148, 64}, {255,255}, - {156, 0}, {143, 15}, {26 , 0}, {26 , 15}, {149, 27}, {32 , 27}, {153, 40}, {36 , 40}, {34 , 64}, {255,255}, {42 , 52}, {255,255}, {255,255}, - {169, 0}, {156, 15}, {39 , 0}, {39 , 15}, {162, 27}, {45 , 27}, {255,255}, {49 , 40}, {255,255}, {255,255}, {55 , 52}, {164, 64}, {255,255}, - {182, 0}, {175, 15}, {52 , 0}, {52 , 15}, {179, 27}, {58 , 27}, {174, 40}, {62 , 40}, {255,255}, {170, 52}, {68 , 52}, {180, 64}, {255,255}, - {198, 0}, {198, 15}, {65 , 0}, {65 , 15}, {198, 27}, {71 , 27}, {255,255}, {75 , 40}, {83 , 64}, {255,255}, {81 , 52}, {198, 64}, {255,255}, - {211, 0}, {211, 15}, {84 , 0}, {78 , 15}, {211, 27}, {84 , 27}, {255,255}, {88 , 40}, {255,255}, {211, 52}, {94 , 52}, {211, 64}, {255,255}, - {224, 0}, {224, 15}, {97 , 0}, {91 , 15}, {224, 27}, {97 , 27}, {255,255}, {101, 40}, {255,255}, {255,255}, {107, 52}, {224, 64}, {255,255}, - {255,255}, {255,255}, {110, 0}, {104, 15}, {255,255}, {110, 27}, {255,255}, {114, 40}, {255,255}, {255,255}, {120, 52}, {255,255}, {255,255} -}, { - 1, 4, 1, 1, 4, 1, 4, 1, 1, 4, 1, 4, 4, //0-12 - 1, 4, 4, 4, 4, 4, 4, 4, 1, 4, 4, 1, 4, //13-25 - 1, 4, 1, 4, 4, 4, 4, 4, 1, 4, 4, 4, 4, //26-38 - 1, 4, 1, 4, 4, 4, 4, 4, 4, 4, 4, 1, 4, //39-51 - 1, 1, 1, 4, 1, 4, 1, 4, 4, 1, 4, 1, 4, //52-64 - 1, 1, 1, 4, 1, 4, 4, 4, 1, 4, 4, 1, 4, //65-77 - 1, 1, 1, 4, 1, 4, 4, 4, 4, 1, 4, 1, 4, //78-90 - 1, 1, 1, 4, 1, 4, 4, 4, 4, 4, 4, 1, 4, //91-103 - 4, 4, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4 //104-116 -} }; - -static void init(void) { - i2c_init(); - IS31FL3741_init(DRIVER_ADDR_1); - for (int index = 0; index < ISSI_DRIVER_TOTAL; index++) { - bool enabled = !( ( index == -1+0+13) || //A13 - ( index == -1+13+3) || //B3 - ( index == -1+13+13) || //B13 - ( index == -1+26+10) || //C10 - ( index == -1+26+12) || //C12 - ( index == -1+26+13) || //C13 - ( index == -1+39+7) || //D7 - ( index == -1+39+9) || //D9 - ( index == -1+39+10) || //D10 - ( index == -1+39+13) || //D13 - ( index == -1+52+9) || //E9 - ( index == -1+52+13) || //E13 - ( index == -1+65+7) || //F7 - ( index == -1+65+10) || //F10 - ( index == -1+65+13) || //F13 - ( index == -1+78+7) || //G7 - ( index == -1+78+9) || //G9 - ( index == -1+78+13) || //G13 - ( index == -1+91+7) || //H7 - ( index == -1+91+9) || //H9 - ( index == -1+91+10) || //H10 - ( index == -1+91+13) || //H13 - ( index == -1+104+1) || //I1 - ( index == -1+104+2) || //I2 - ( index == -1+104+5) || //I5 - ( index == -1+104+7) || //I7 - ( index == -1+104+9) || //I9 - ( index == -1+104+10) || //I10 - ( index == -1+104+12) || //I12 - ( index == -1+104+13) //I13 - ); - IS31FL3741_set_led_control_register(index, enabled, enabled, enabled); - } - IS31FL3741_update_led_control_registers(DRIVER_ADDR_1, 0); -} - -static void flush(void) { - IS31FL3741_update_pwm_buffers(DRIVER_ADDR_1, 0); -} - -const rgb_matrix_driver_t rgb_matrix_driver = { - .init = init, - .flush = flush, - .set_color = IS31FL3741_set_color, - .set_color_all = IS31FL3741_set_color_all -}; -#endif diff --git a/keyboards/xelus/pachi/rgb/rev1/rev1.h b/keyboards/xelus/pachi/rgb/rev1/rev1.h deleted file mode 100644 index d2db5ebfc0..0000000000 --- a/keyboards/xelus/pachi/rgb/rev1/rev1.h +++ /dev/null @@ -1,36 +0,0 @@ -/* Copyright 2021 Harrison Chan (Xelus) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#pragma once - -#include "quantum.h" - -#define ____ KC_NO - -#define LAYOUT_tkl_ansi_tsangan( \ - K000, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, \ - K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K412, K415, \ - K500, K501, K502, K505, K510, K512, K513, K514, K515, K516 \ -) { \ - { K000, ____, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, ____, K313, ____, ____, ____ }, \ - { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, ____, K412, ____, ____, K415, ____ }, \ - { K500, K501, K502, ____, ____, K505, ____, ____, ____, ____, K510, ____, K512, K513, K514, K515, K516 } \ -} diff --git a/keyboards/xelus/pachi/rgb/rev1/rules.mk b/keyboards/xelus/pachi/rgb/rev1/rules.mk deleted file mode 100644 index 3cfa837091..0000000000 --- a/keyboards/xelus/pachi/rgb/rev1/rules.mk +++ /dev/null @@ -1,29 +0,0 @@ -# MCU name -MCU = STM32L422 - -# Bootloader selection -BOOTLOADER = stm32-dfu - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # Enable N-Key Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches - -EEPROM_DRIVER = i2c - -RGB_MATRIX_ENABLE = yes -RGB_MATRIX_DRIVER = custom - -COMMON_VPATH += $(DRIVER_PATH)/issi -SRC += drivers/led/issi/is31fl3741.c - -LTO_ENABLE = yes -OPT = 2 |