diff options
Diffstat (limited to 'keyboards/xelus/dawn60/rev1/config.h')
| -rw-r--r-- | keyboards/xelus/dawn60/rev1/config.h | 143 |
1 files changed, 143 insertions, 0 deletions
diff --git a/keyboards/xelus/dawn60/rev1/config.h b/keyboards/xelus/dawn60/rev1/config.h new file mode 100644 index 0000000000..375bea9486 --- /dev/null +++ b/keyboards/xelus/dawn60/rev1/config.h @@ -0,0 +1,143 @@ +/* Copyright 2020 Harrison Chan (Xelus) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "config_common.h" + +// USB Device descriptor parameter +#define VENDOR_ID 0x5845 // XE +#define PRODUCT_ID 0x0060 // Dawn60 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Xelus +#define PRODUCT Dawn60 +// key matrix size +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +//no underglow - prototype +//#define MATRIX_ROW_PINS { B1, B3, B7, F6, F7 } +//#define MATRIX_COL_PINS { B0, D5, B2, F5, D2, D3, D4, D6, D7, B4, B5, B6, C6, C7 } +//#define UNUSED_PINS + +//underglow +#define MATRIX_ROW_PINS { B1, B3, F1, F6, F7 } +#define MATRIX_COL_PINS { B0, D5, B2, F5, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 } +#define UNUSED_PINS + +// IS31FL3731 driver +#define DRIVER_COUNT 2 +#define DRIVER_LED_TOTAL 64 + +// COL2ROW or ROW2COL +#define DIODE_DIRECTION COL2ROW + +// Set 0 if debouncing isn't needed +#define DEBOUNCE 5 + +// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap +#define LOCKING_SUPPORT_ENABLE +// Locking resynchronize hack +#define LOCKING_RESYNC_ENABLE + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +// disable debug print +//#define NO_DEBUG + +// disable print +//#define NO_PRINT + +// disable action features +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#define RGB_BACKLIGHT_ENABLED 1 + +// This conditionally compiles the backlight code for Dawn60 specifics +#define RGB_BACKLIGHT_DAWN60 + +//RGB Underglow defines +#define RGB_DI_PIN F0 +#define WS2812_LED_TOTAL 20 + +#define RGB_UNDERGLOW_ALPHA_TOP_START 0 +#define RGB_UNDERGLOW_ALPHA_TOP_END 6 +#define RGB_UNDERGLOW_ALPHA_BOT_START 12 +#define RGB_UNDERGLOW_ALPHA_BOT_END 15 + +// enable/disable LEDs based on layout +// switch between split backspace (1) or normal backspace(0) +#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 1 +// switch between Tsangan (1) or Arrows Bottom Row (0) +#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0 +// switch between standard split rshift (0) or arrows r shift (1) +// .------------------. .-------------------. +// | ? | Shift | Fn | vs | Shift | Up | Fn | +// `------------------' `-------------------' +#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 1 + +//not used +#define RGB_BACKLIGHT_USE_ISO_ENTER 0 +#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0 +#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0 + +// disable backlight when USB suspended (PC sleep/hibernate/shutdown) +#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0 + +// disable backlight after timeout in minutes, 0 = no timeout +#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0 + +// the default brightness +#define RGB_BACKLIGHT_BRIGHTNESS 255 + +// the default effect (RGB test) +#define RGB_BACKLIGHT_EFFECT 255 + +// the default effect speed (0-3) +#define RGB_BACKLIGHT_EFFECT_SPEED 0 + +// the default color1 and color2 +#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 } +#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 } + +// These define which keys in the matrix are alphas/mods +// Used for backlight effects so colors are different for +// alphas vs. mods +// Each value is for a row, bit 0 is column 0 +// Alpha=0 Mod=1 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0000000000000001 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0010000000000001 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0011000000000001 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0011000000000001 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011111000011111 + +#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } + +// Backlight config starts after VIA's EEPROM usage, +// dynamic keymaps start after this. +#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 31 + +// VIA lighting is handled by the keyboard-level code +#define VIA_CUSTOM_LIGHTING_ENABLE |