diff options
Diffstat (limited to 'keyboards/vitamins_included/rev1')
| -rw-r--r-- | keyboards/vitamins_included/rev1/.noci | 0 | ||||
| -rw-r--r-- | keyboards/vitamins_included/rev1/config.h | 78 | ||||
| -rw-r--r-- | keyboards/vitamins_included/rev1/info.json | 5 | ||||
| -rw-r--r-- | keyboards/vitamins_included/rev1/readme.md | 81 | ||||
| -rw-r--r-- | keyboards/vitamins_included/rev1/rev1.c | 1 | ||||
| -rw-r--r-- | keyboards/vitamins_included/rev1/rev1.h | 3 | ||||
| -rw-r--r-- | keyboards/vitamins_included/rev1/rules.mk | 4 |
7 files changed, 0 insertions, 172 deletions
diff --git a/keyboards/vitamins_included/rev1/.noci b/keyboards/vitamins_included/rev1/.noci deleted file mode 100644 index e69de29bb2..0000000000 --- a/keyboards/vitamins_included/rev1/.noci +++ /dev/null diff --git a/keyboards/vitamins_included/rev1/config.h b/keyboards/vitamins_included/rev1/config.h deleted file mode 100644 index 0a32ba8c47..0000000000 --- a/keyboards/vitamins_included/rev1/config.h +++ /dev/null @@ -1,78 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#include "config_common.h" - -#define SPLIT_USB_DETECT - -#define EE_HANDS -#define SOFT_SERIAL_PIN D0 - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 8 -#define MATRIX_COLS 6 - -// wiring of each half -#define MATRIX_ROW_PINS { F5, F6, C7, F7 } -#define MATRIX_COL_PINS { F1, F4, E2, B6, D7, D6} - -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -// #define BACKLIGHT_LEVELS 3 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* ws2812 RGB LED */ -#define RGB_DI_PIN F0 - -#define RGBLED_NUM 16 // Number of LEDs -#define RGBLIGHT_ANIMATIONS - -/* Audio settings */ -#ifdef AUDIO_ENABLE - #define AUDIO_PIN C6 // Define this to enable the buzzer -#endif - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -// #define NO_DEBUG - -/* disable print */ -// #define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT diff --git a/keyboards/vitamins_included/rev1/info.json b/keyboards/vitamins_included/rev1/info.json deleted file mode 100644 index 90ac25f360..0000000000 --- a/keyboards/vitamins_included/rev1/info.json +++ /dev/null @@ -1,5 +0,0 @@ -{ - "usb": { - "device_version": "0.0.1" - } -} diff --git a/keyboards/vitamins_included/rev1/readme.md b/keyboards/vitamins_included/rev1/readme.md deleted file mode 100644 index 038f14f5d0..0000000000 --- a/keyboards/vitamins_included/rev1/readme.md +++ /dev/null @@ -1,81 +0,0 @@ -# Rev1 - -This readme describes the specifics of using the rev1 design - -## First Time Setup - -Clone the `qmk_firmware` repo and navigate to its top level directory. [Once your build environment is setup](https://docs.qmk.fm/getting_started_build_tools.html), you'll be able to generate the default .hex using the [build/compile instructions](https://docs.qmk.fm/build-compile-instructions) in the docs - -If everything worked correctly you will see a file: - -```bash -lets_split_vitamins_rev1_YOUR_KEYMAP_NAME.hex -``` - -If you want, you can flash the hex file to the keyboard right after compilation, by adding `:avrdude` to the end of the make command like so: - -```bash -make lets_split_vitamins/rev1:default:avrdude -``` - -This will both compile the hex, and flash the connected half. - -For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/readme.md##customizing-your-keymap) in the main readme.md. - -## Entering bootloader - -If the keyboard isn't new, and has been flashed before, you need to enter bootloader. -To enter bootloader, either use the assigned keys on the keymap, or if none have been put in the keymap, quickly short the reset to gnd twice. (Bottom pins of programming header, see image)  - -If using the default keymap, there's a reset key-combination on each half: -***Lower (SW23) and left-shift (SW13)*** on the left half, or -***Raise(SW44) and Enter(SW42)*** on the right half -It is recommended to add such reset keys to any custom keymaps. It shouldn't be necesarry to have one on each half, but the default layout has that. - -The board exits bootloader mode after 8 seconds, if you haven't started flashing. - -## EEPROM - -If this is the first time you're flashing the boards, you have to flash EEPROM - -0. If your keyboard is plugged in, unplug it -1. Open a terminal, and navigate to the qmk_firmware folder -1. Run `ls /dev | grep tty` Note down which ports you see -1. Plug the keyboard in, if it's new, it should enter bootloader, if it's not new, see **Entering bootloader** on how to enter bootloader mode -1. Right after entering bootloader, run `ls /dev | grep tty` again. There should be a new tty, this is the bootloader TTY, note it down. If nothing shows see **Entering bootloader** on how to enter bootloader mode -1. For the left hand side, run `avrdude -c avr109 -p m32u4 -P /dev/ttyS1 -U eeprom:w:"./quantum/split_common/eeprom-lefthand.eep":a` -Replace ***/dev/ttyS1*** with the port you noted down earlier. If you're on windows using msys2, replace ***/dev/ttyS1*** with COM2, note that the number is one higher than the tty number. -Do the same For the right hand, but change the file to ***eeprom-righthand.eep*** - -Your EEPROM should be flashed :) - -In the future, you shouldn't need to flash EEPROM (it will in fact wear the eeprom memory, so don't) - -## Flashing - -If you haven't flashed EEPROM before, do that first. - -To flash keymaps onto the keyboard, use: - -```bash -make lets_split_vitamins/rev1:[KEYMAP]:avrdude -``` - -from the qmk_firmware folder. Default being the default keymap. - -## Cases - -The keyboard is supplied with some simple plate cases, alternatively a 3D model for the left half is available [here](https://cad.onshape.com/documents/c6e5ae250d1e24fe46c9ef6c/w/d69f7049c0921df3d2b241f9/e/ecc2b176ab52a6d77bc55051). - -Alternatively the flat case for the Rev2 works for the rev1 kit as well, however one of the supports collide with a diode. If printed in thermo-plastics this can be heated and pressed to form a recess for the diode. - -## WS2812 RGB - -If you wish to add RGB LED strips to your board, then the boards have breakouts for these. -You can either have each halfcontrol it's own strip of LEDs, or, if you're using a TRRS cable, you can have one half control the LEDs in both halves. - -To add RGB LEDs to the board, solder the + and - of the >WS2812 headers to the LED strips. Then if you want each half to control it's own set of LEDs seperately, solder the D pad to Din on the strips. - -If you instead want to syncronize the halves over a TRRS cable, solder the D pad to Din in the side you want to control the strips, either will work so flip a coin, and then solder the Dout pad to the WS2812> pad on the board. On the other half, solder the WS2812> pad to Din. - - diff --git a/keyboards/vitamins_included/rev1/rev1.c b/keyboards/vitamins_included/rev1/rev1.c deleted file mode 100644 index 520a869e57..0000000000 --- a/keyboards/vitamins_included/rev1/rev1.c +++ /dev/null @@ -1 +0,0 @@ -#include "rev1.h" diff --git a/keyboards/vitamins_included/rev1/rev1.h b/keyboards/vitamins_included/rev1/rev1.h deleted file mode 100644 index 53ae64a6ea..0000000000 --- a/keyboards/vitamins_included/rev1/rev1.h +++ /dev/null @@ -1,3 +0,0 @@ - -#pragma once -#include QMK_KEYBOARD_H diff --git a/keyboards/vitamins_included/rev1/rules.mk b/keyboards/vitamins_included/rev1/rules.mk deleted file mode 100644 index 6e9beefafe..0000000000 --- a/keyboards/vitamins_included/rev1/rules.mk +++ /dev/null @@ -1,4 +0,0 @@ -# Bootloader selection -BOOTLOADER = caterina - -SPLIT_KEYBOARD = yes |