7 files changed, 0 insertions, 79 deletions
diff --git a/keyboards/viktus/at101_bh/config.h b/keyboards/viktus/at101_bh/config.h
index 9842d0ca6c..5367faa1e4 100644
--- a/keyboards/viktus/at101_bh/config.h
+++ b/keyboards/viktus/at101_bh/config.h
@@ -1,6 +1,5 @@
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 12
diff --git a/keyboards/viktus/omnikey_bh/config.h b/keyboards/viktus/omnikey_bh/config.h
index 7fe3563de8..b5b54d6492 100644
--- a/keyboards/viktus/omnikey_bh/config.h
+++ b/keyboards/viktus/omnikey_bh/config.h
@@ -1,6 +1,5 @@
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 6
diff --git a/keyboards/viktus/smolka/config.h b/keyboards/viktus/smolka/config.h
index fe081689b3..bfd0922db3 100644
--- a/keyboards/viktus/smolka/config.h
+++ b/keyboards/viktus/smolka/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 8
@@ -44,9 +43,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -63,27 +59,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/viktus/sp111/config.h b/keyboards/viktus/sp111/config.h
index 2e2d0a7020..8682bb99b8 100644
--- a/keyboards/viktus/sp111/config.h
+++ b/keyboards/viktus/sp111/config.h
@@ -15,7 +15,6 @@
  */
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 6*2
@@ -35,27 +34,6 @@
 //#define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/viktus/sp_mini/config.h b/keyboards/viktus/sp_mini/config.h
index c26afa9684..331cada5ae 100644
--- a/keyboards/viktus/sp_mini/config.h
+++ b/keyboards/viktus/sp_mini/config.h
@@ -18,7 +18,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 // Rows are doubled-up
@@ -40,9 +39,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MASTER_LEFT
 #define USE_I2C
 
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCE 5
 
diff --git a/keyboards/viktus/styrka/config.h b/keyboards/viktus/styrka/config.h
index 118dafb1f7..c2ce380322 100644
--- a/keyboards/viktus/styrka/config.h
+++ b/keyboards/viktus/styrka/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 10
@@ -48,9 +47,6 @@ B0, which is unconnected on the PCB
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -62,27 +58,6 @@ B0, which is unconnected on the PCB
 // #define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/viktus/z150_bh/config.h b/keyboards/viktus/z150_bh/config.h
index b91b3b4199..66532caa95 100644
--- a/keyboards/viktus/z150_bh/config.h
+++ b/keyboards/viktus/z150_bh/config.h
@@ -1,6 +1,5 @@
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 5