diff options
Diffstat (limited to 'keyboards/viktus/styrka/readme.md')
| -rw-r--r-- | keyboards/viktus/styrka/readme.md | 23 |
1 files changed, 23 insertions, 0 deletions
diff --git a/keyboards/viktus/styrka/readme.md b/keyboards/viktus/styrka/readme.md new file mode 100644 index 0000000000..3d211e8c44 --- /dev/null +++ b/keyboards/viktus/styrka/readme.md @@ -0,0 +1,23 @@ +# Viktus Styrka + + + +The Viktus Styrka is a 65% + left macro block created in a collaboration of OneCreativeMind and BlindAssassin111 (Viktus owner). All design done by BlindAssassin111. The board supports ANSI and ISO modifiers as well as split backspace and stepped/non-stepped caps lock. + +The PCB is an arm powered board utilizing the STM32F072CBT6 mcu. The PCB is designed to work with the universal daughterboard and a 4in (~100mm) 4 pin JST SR cable with reversed pinout (pin 1 of both connectors is the same wire etc.). + +On the PCB is a single button for a reset for flashing. As well, there is a [Segger J-Link 6-pin Needle Adapter](https://www.segger.com/products/debug-probes/j-link/accessories/adapters/6-pin-needle-adapter/) footprint for reflashing the mcu as a backup in case of a bootloader issue. + +* Keyboard Maintainer: [jrfhoutx](https://github.com/jrfhoutx), blindassassin111 +* Hardware Supported: Styrka +* Hardware Availability: <https://www.Viktus.Design> + +Make example for this keyboard (after setting up your build environment): + + make viktus/styrka:default + +Flashing example for this keyboard: + + make viktus/styrka:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |