diff options
Diffstat (limited to 'keyboards/tzarc/djinn/djinn.c')
| -rw-r--r-- | keyboards/tzarc/djinn/djinn.c | 233 |
1 files changed, 0 insertions, 233 deletions
diff --git a/keyboards/tzarc/djinn/djinn.c b/keyboards/tzarc/djinn/djinn.c deleted file mode 100644 index 5e5fe44c67..0000000000 --- a/keyboards/tzarc/djinn/djinn.c +++ /dev/null @@ -1,233 +0,0 @@ -// Copyright 2018-2022 Nick Brassel (@tzarc) -// SPDX-License-Identifier: GPL-2.0-or-later -#include <string.h> -#include "quantum.h" -#include <hal_pal.h> -#include "djinn.h" -#include "serial.h" -#include "split_util.h" -#include "qp.h" - -painter_device_t lcd; - -// clang-format off -#ifdef SWAP_HANDS_ENABLE -const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { - { { 6, 6 }, { 5, 6 }, { 4, 6 }, { 3, 6 }, { 2, 6 }, { 1, 6 }, { 0, 6 } }, - { { 6, 7 }, { 5, 7 }, { 4, 7 }, { 3, 7 }, { 2, 7 }, { 1, 7 }, { 0, 7 } }, - { { 6, 8 }, { 5, 8 }, { 4, 8 }, { 3, 8 }, { 2, 8 }, { 1, 8 }, { 0, 8 } }, - { { 6, 9 }, { 5, 9 }, { 4, 9 }, { 3, 9 }, { 2, 9 }, { 1, 9 }, { 0, 9 } }, - { { 0, 0 }, { 0, 0 }, { 0, 0 }, { 6, 10 }, { 5, 10 }, { 4, 10 }, { 3, 10 } }, - { { 0, 0 }, { 6, 11 }, { 5, 11 }, { 4, 11 }, { 3, 11 }, { 2, 11 }, { 1, 11 } }, - - { { 6, 0 }, { 5, 0 }, { 4, 0 }, { 3, 0 }, { 2, 0 }, { 1, 0 }, { 0, 0 } }, - { { 6, 1 }, { 5, 1 }, { 4, 1 }, { 3, 1 }, { 2, 1 }, { 1, 1 }, { 0, 1 } }, - { { 6, 2 }, { 5, 2 }, { 4, 2 }, { 3, 2 }, { 2, 2 }, { 1, 2 }, { 0, 2 } }, - { { 6, 3 }, { 5, 3 }, { 4, 3 }, { 3, 3 }, { 2, 3 }, { 1, 3 }, { 0, 3 } }, - { { 0, 0 }, { 0, 0 }, { 0, 0 }, { 6, 4 }, { 5, 4 }, { 4, 4 }, { 3, 4 } }, - { { 0, 0 }, { 6, 5 }, { 5, 5 }, { 4, 5 }, { 3, 5 }, { 2, 5 }, { 1, 5 } }, -}; -# ifdef ENCODER_MAP_ENABLE -const uint8_t PROGMEM encoder_hand_swap_config[NUM_ENCODERS] = { 1, 0 }; -# endif // ENCODER_MAP_ENABLE -#endif // SWAP_HANDS_ENABLE -// clang-format on - -void board_init(void) { - usbpd_init(); -} - -//---------------------------------------------------------- -// Initialisation - -void keyboard_post_init_kb(void) { - // Register keyboard state sync split transaction - transaction_register_rpc(RPC_ID_SYNC_STATE_KB, kb_state_sync_slave); - - // Reset the initial shared data value between master and slave - memset(&kb_state, 0, sizeof(kb_state)); - - // Turn off increased current limits - setPinOutput(RGB_CURR_1500mA_OK_PIN); - writePinLow(RGB_CURR_1500mA_OK_PIN); - setPinOutput(RGB_CURR_3000mA_OK_PIN); - writePinLow(RGB_CURR_3000mA_OK_PIN); - - // Turn on the RGB - setPinOutput(RGB_POWER_ENABLE_PIN); - writePinHigh(RGB_POWER_ENABLE_PIN); - -#ifdef EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN - setPinOutput(EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN); - writePinHigh(EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN); -#endif // EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN - - // Turn on the LCD - setPinOutput(LCD_POWER_ENABLE_PIN); - writePinHigh(LCD_POWER_ENABLE_PIN); - - // Let the LCD get some power... - wait_ms(150); - - // Initialise the LCD - lcd = qp_ili9341_make_spi_device(320, 240, LCD_CS_PIN, LCD_DC_PIN, LCD_RST_PIN, 4, 0); - qp_init(lcd, QP_ROTATION_0); - - // Turn on the LCD and clear the display - kb_state.lcd_power = 1; - qp_power(lcd, true); - qp_rect(lcd, 0, 0, 239, 319, HSV_BLACK, true); - - // Turn on the LCD backlight - backlight_enable(); - backlight_level(BACKLIGHT_LEVELS); - - // Allow for user post-init - keyboard_post_init_user(); -} - -//---------------------------------------------------------- -// RGB brightness scaling dependent on USBPD state - -#if defined(RGB_MATRIX_ENABLE) -RGB rgb_matrix_hsv_to_rgb(HSV hsv) { - float scale; - -# ifdef DJINN_SUPPORTS_3A_FUSE - // The updated BOM on the Djinn has properly-spec'ed fuses -- 1500mA/3000mA hold current - switch (kb_state.current_setting) { - default: - case USBPD_500MA: - scale = 0.35f; - break; - case USBPD_1500MA: - scale = 0.75f; - break; - case USBPD_3000MA: - scale = 1.0f; - break; - } -# else - // The original BOM on the Djinn had wrongly-spec'ed fuses -- 750mA/1500mA hold current - switch (kb_state.current_setting) { - default: - case USBPD_500MA: - case USBPD_1500MA: - scale = 0.35f; - break; - case USBPD_3000MA: - scale = 0.75f; - break; - } -# endif - - hsv.v = (uint8_t)(hsv.v * scale); - return hsv_to_rgb(hsv); -} -#endif - -//---------------------------------------------------------- -// UI Placeholder, implemented in themes - -__attribute__((weak)) void draw_ui_user(void) {} - -//---------------------------------------------------------- -// Housekeeping - -void housekeeping_task_kb(void) { - // Update kb_state so we can send to slave - kb_state_update(); - - // Data sync from master to slave - kb_state_sync(); - - // Work out if we've changed our current limit, update the limiter circuit switches - static uint8_t current_setting = USBPD_500MA; - if (current_setting != kb_state.current_setting) { - current_setting = kb_state.current_setting; - -#ifdef DJINN_SUPPORTS_3A_FUSE - // The updated BOM on the Djinn has properly-spec'ed fuses -- 1500mA/3000mA hold current - switch (current_setting) { - default: - case USBPD_500MA: - writePinLow(RGB_CURR_1500mA_OK_PIN); - writePinLow(RGB_CURR_3000mA_OK_PIN); - break; - case USBPD_1500MA: - writePinHigh(RGB_CURR_1500mA_OK_PIN); - writePinLow(RGB_CURR_3000mA_OK_PIN); - break; - case USBPD_3000MA: - writePinHigh(RGB_CURR_1500mA_OK_PIN); - writePinHigh(RGB_CURR_3000mA_OK_PIN); - break; - } -#else - // The original BOM on the Djinn had wrongly-spec'ed fuses -- 750mA/1500mA hold current - switch (current_setting) { - default: - case USBPD_500MA: - case USBPD_1500MA: - writePinLow(RGB_CURR_1500mA_OK_PIN); - writePinLow(RGB_CURR_3000mA_OK_PIN); - break; - case USBPD_3000MA: - writePinHigh(RGB_CURR_1500mA_OK_PIN); - writePinLow(RGB_CURR_3000mA_OK_PIN); - break; - } -#endif - - // If we've changed the current limit, toggle rgb off and on if it was on, to force a brightness update on all LEDs - if (is_keyboard_master() && rgb_matrix_is_enabled()) { - rgb_matrix_disable_noeeprom(); - rgb_matrix_enable_noeeprom(); - } - } - - // Turn on/off the LCD - static bool lcd_on = false; - if (lcd_on != (bool)kb_state.lcd_power) { - lcd_on = (bool)kb_state.lcd_power; - qp_power(lcd, lcd_on); - } - - // Enable/disable RGB - if (lcd_on) { - // Turn on RGB - writePinHigh(RGB_POWER_ENABLE_PIN); - // Modify the RGB state if different to the LCD state - if (rgb_matrix_is_enabled() != lcd_on) { - // Wait for a small amount of time to allow the RGB capacitors to charge, before enabling RGB output - wait_ms(10); - // Enable RGB - rgb_matrix_enable_noeeprom(); - } - } else { - // Turn off RGB - writePinLow(RGB_POWER_ENABLE_PIN); - // Disable the PWM output for the RGB - if (rgb_matrix_is_enabled() != lcd_on) { - rgb_matrix_disable_noeeprom(); - } - } - - // Match the backlight to the LCD state - if (is_keyboard_master() && is_backlight_enabled() != lcd_on) { - if (lcd_on) - backlight_enable(); - else - backlight_disable(); - } - - // Draw the UI - if (kb_state.lcd_power) { - draw_ui_user(); - } - - // Go into low-scan interrupt-based mode if we haven't had any matrix activity in the last 250 milliseconds - if (last_input_activity_elapsed() > 250) { - matrix_wait_for_interrupt(); - } -}
\ No newline at end of file |