summaryrefslogtreecommitdiffstats
path: root/keyboards/treadstone48/rev1
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/treadstone48/rev1')
-rw-r--r--keyboards/treadstone48/rev1/config.h275
-rw-r--r--keyboards/treadstone48/rev1/matrix.c357
-rw-r--r--keyboards/treadstone48/rev1/rev1.c30
-rw-r--r--keyboards/treadstone48/rev1/rev1.h43
-rw-r--r--keyboards/treadstone48/rev1/rules.mk3
-rw-r--r--keyboards/treadstone48/rev1/serial_config.h8
-rw-r--r--keyboards/treadstone48/rev1/serial_config_simpleapi.h8
-rw-r--r--keyboards/treadstone48/rev1/split_scomm.c92
-rw-r--r--keyboards/treadstone48/rev1/split_scomm.h21
-rw-r--r--keyboards/treadstone48/rev1/split_util.c70
-rw-r--r--keyboards/treadstone48/rev1/split_util.h16
11 files changed, 244 insertions, 679 deletions
diff --git a/keyboards/treadstone48/rev1/config.h b/keyboards/treadstone48/rev1/config.h
index a46951c71a..56ffbaef01 100644
--- a/keyboards/treadstone48/rev1/config.h
+++ b/keyboards/treadstone48/rev1/config.h
@@ -1,6 +1,5 @@
/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
+Copyright 2020 marksard
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -16,8 +15,9 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef REV1_CONFIG_H
-#define REV1_CONFIG_H
+#pragma once
+
+#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
@@ -27,83 +27,159 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define PRODUCT treadstone48
#define DESCRIPTION Symmetrical staggered 47+1 Keys Keyboard
-#define TAPPING_FORCE_HOLD
-#define TAPPING_TERM 150
-
-/* Use I2C or Serial */
-#define USE_I2C
-#define USE_SERIAL
-//#define USE_MATRIX_I2C
-
-/* Select hand configuration */
-#define MASTER_LEFT
-// #define MASTER_RIGHT
-// #define EE_HANDS
-
-// OLED support
-// see ./rules.mk: OLED_ENABLE=yes or no
-#ifdef OLED_ENABLE
- #define SSD1306OLED
-#endif
-
/* key matrix size */
-// Rows are doubled-up
#define MATRIX_ROWS 16
-#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B2, B6 }
-
-// wiring of each half
#define MATRIX_COLS 6
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B2, B6 }
#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 }
+#define UNUSED_PINS
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
-/* number of backlight levels */
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
// #define BACKLIGHT_LEVELS 3
-/* Set 0 if debouncing isn't needed */
+#define RGB_DI_PIN D3
+#ifdef RGB_DI_PIN
+ #ifndef RS_EXTRA_LED
+ #define RGBLED_NUM 12
+ #define RGBLED_SPLIT {12, 0}
+ #else
+ #define RGBLED_NUM 32
+ #define RGBLED_SPLIT {12, 20}
+ #endif
+ #define RGBLIGHT_HUE_STEP 8
+ #define RGBLIGHT_SAT_STEP 8
+ #define RGBLIGHT_VAL_STEP 8
+ #define RGBLIGHT_LIMIT_VAL 180 /* The maximum brightness level */
+ #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+// #define RGBLIGHT_ANIMATIONS
+/*== or choose animations ==*/
+// #define RGBLIGHT_EFFECT_BREATHING
+ #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+ #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+// #define RGBLIGHT_EFFECT_SNAKE
+ #define RGBLIGHT_EFFECT_KNIGHT
+// #define RGBLIGHT_EFFECT_CHRISTMAS
+ #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+// #define RGBLIGHT_EFFECT_RGB_TEST
+// #define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+ /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+ #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
+ /*==== use exp() and sin() ====*/
+ #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
+ #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-//#define LOCKING_SUPPORT_ENABLE
+#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
-//#define LOCKING_RESYNC_ENABLE
+#define LOCKING_RESYNC_ENABLE
-/* ws2812 RGB LED */
-#define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
-//#define RGBLED_NUM 12 // Number of LEDs. see ./keymaps/default/config.h
-#define ws2812_PORTREG PORTD
-#define ws2812_DDRREG DDRD
-
-// treadstone48 keyboard RGB LED support
-//#define RGBLIGHT_ANIMATIONS : see ./rules.mk: LED_ANIMATIONS = yes or no
-// see ./rules.mk: LED_BACK_ENABLE or LED_UNDERGLOW_ENABLE set yes
-#define RGBLED_NUM 12
-
-#ifndef IOS_DEVICE_ENABLE
- #define RGBLIGHT_LIMIT_VAL 180
- #define RGBLIGHT_VAL_STEP 17
-#else
- #define RGBLIGHT_LIMIT_VAL 50
- #define RGBLIGHT_VAL_STEP 4
-#endif
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-
-#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE)
-// USB_MAX_POWER_CONSUMPTION value for treadstone48 keyboard
-// 120 RGBoff, OLEDoff
-// 120 OLED
-// 330 RGB 6
-// 300 RGB 32
-// 310 OLED & RGB 32
- #define USB_MAX_POWER_CONSUMPTION 400
-#else
- // fix iPhone and iPad power adapter issue
- // iOS device need lessthan 100
- #define USB_MAX_POWER_CONSUMPTION 100
-#endif
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP H
+//#define MAGIC_KEY_HELP_ALT SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER0_ALT GRAVE
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
/*
* Feature disable options
@@ -111,17 +187,72 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/* disable debug print */
-// #define NO_DEBUG
+//#define NO_DEBUG
/* disable print */
-// #define NO_PRINT
+//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
+/* disable these deprecated features by default */
+#ifndef LINK_TIME_OPTIMIZATION_ENABLE
+ #define NO_ACTION_MACRO
+ #define NO_ACTION_FUNCTION
+#endif
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES 2 //< number of visible lines of the display
+#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
+
+#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT PORTB //< port for the LCD lines
+#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
+#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
+#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
+#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
+#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
+#define LCD_RS_PORT LCD_PORT //< port for RS line
+#define LCD_RS_PIN 3 //< pin for RS line
+#define LCD_RW_PORT LCD_PORT //< port for RW line
+#define LCD_RW_PIN 2 //< pin for RW line
+#define LCD_E_PORT LCD_PORT //< port for Enable line
+#define LCD_E_PIN 1 //< pin for Enable line
#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/treadstone48/rev1/matrix.c b/keyboards/treadstone48/rev1/matrix.c
deleted file mode 100644
index 8685a8125e..0000000000
--- a/keyboards/treadstone48/rev1/matrix.c
+++ /dev/null
@@ -1,357 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * scan matrix
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <string.h>
-#include <avr/io.h>
-#include <avr/wdt.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "split_util.h"
-#include "pro_micro.h"
-
-#ifdef USE_MATRIX_I2C
-# include "i2c.h"
-#else // USE_SERIAL
-# include "split_scomm.h"
-#endif
-
-#ifndef DEBOUNCE
-# define DEBOUNCE 5
-#endif
-
-#define ERROR_DISCONNECT_COUNT 5
-
-static uint8_t debouncing = DEBOUNCE;
-static const int ROWS_PER_HAND = MATRIX_ROWS/2;
-static uint8_t error_count = 0;
-uint8_t is_master = 0 ;
-
-static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
-static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static matrix_row_t read_cols(void);
-static void init_cols(void);
-static void unselect_rows(void);
-static void select_row(uint8_t row);
-static uint8_t matrix_master_scan(void);
-
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
- matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
- matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void)
-{
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
- return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
- debug_enable = true;
- debug_matrix = true;
- debug_mouse = true;
- // initialize row and col
- unselect_rows();
- init_cols();
-
- TX_RX_LED_INIT;
- TXLED0;
- RXLED0;
-
- // initialize matrix state: all keys off
- for (uint8_t i=0; i < MATRIX_ROWS; i++) {
- matrix[i] = 0;
- matrix_debouncing[i] = 0;
- }
-
- is_master = has_usb();
-
- matrix_init_quantum();
-}
-
-uint8_t _matrix_scan(void)
-{
- // Right hand is stored after the left in the matirx so, we need to offset it
- int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
-
- for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
- select_row(i);
- _delay_us(30); // without this wait read unstable value.
- matrix_row_t cols = read_cols();
- if (matrix_debouncing[i+offset] != cols) {
- matrix_debouncing[i+offset] = cols;
- debouncing = DEBOUNCE;
- }
- unselect_rows();
- }
-
- if (debouncing) {
- if (--debouncing) {
- _delay_ms(1);
- } else {
- for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
- matrix[i+offset] = matrix_debouncing[i+offset];
- }
- }
- }
-
- return 1;
-}
-
-#ifdef USE_MATRIX_I2C
-
-// Get rows from other half over i2c
-int i2c_transaction(void) {
- int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-
- int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
- if (err) goto i2c_error;
-
- // start of matrix stored at 0x00
- err = i2c_master_write(0x00);
- if (err) goto i2c_error;
-
- // Start read
- err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
- if (err) goto i2c_error;
-
- if (!err) {
- int i;
- for (i = 0; i < ROWS_PER_HAND-1; ++i) {
- matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
- }
- matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
- i2c_master_stop();
- } else {
-i2c_error: // the cable is disconnceted, or something else went wrong
- i2c_reset_state();
- return err;
- }
-
- return 0;
-}
-
-#else // USE_SERIAL
-
-int serial_transaction(int master_changed) {
- int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-#ifdef SERIAL_USE_MULTI_TRANSACTION
- int ret=serial_update_buffers(master_changed);
-#else
- int ret=serial_update_buffers();
-#endif
- if (ret ) {
- if(ret==2) RXLED1;
- return 1;
- }
- RXLED0;
- memcpy(&matrix[slaveOffset],
- (void *)serial_slave_buffer, sizeof(serial_slave_buffer));
- return 0;
-}
-#endif
-
-uint8_t matrix_scan(void)
-{
- if (is_master) {
- matrix_master_scan();
- }else{
- matrix_slave_scan();
- int offset = (isLeftHand) ? ROWS_PER_HAND : 0;
- memcpy(&matrix[offset],
- (void *)serial_master_buffer, sizeof(serial_master_buffer));
- matrix_scan_quantum();
- }
- return 1;
-}
-
-
-uint8_t matrix_master_scan(void) {
-
- int ret = _matrix_scan();
- int mchanged = 1;
-
- int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
-
-#ifdef USE_MATRIX_I2C
-// for (int i = 0; i < ROWS_PER_HAND; ++i) {
- /* i2c_slave_buffer[i] = matrix[offset+i]; */
-// i2c_slave_buffer[i] = matrix[offset+i];
-// }
-#else // USE_SERIAL
- #ifdef SERIAL_USE_MULTI_TRANSACTION
- mchanged = memcmp((void *)serial_master_buffer,
- &matrix[offset], sizeof(serial_master_buffer));
- #endif
- memcpy((void *)serial_master_buffer,
- &matrix[offset], sizeof(serial_master_buffer));
-#endif
-
-#ifdef USE_MATRIX_I2C
- if( i2c_transaction() ) {
-#else // USE_SERIAL
- if( serial_transaction(mchanged) ) {
-#endif
- // turn on the indicator led when halves are disconnected
- TXLED1;
-
- error_count++;
-
- if (error_count > ERROR_DISCONNECT_COUNT) {
- // reset other half if disconnected
- int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- matrix[slaveOffset+i] = 0;
- }
- }
- } else {
- // turn off the indicator led on no error
- TXLED0;
- error_count = 0;
- }
- matrix_scan_quantum();
- return ret;
-}
-
-void matrix_slave_scan(void) {
- _matrix_scan();
-
- int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
-
-#ifdef USE_MATRIX_I2C
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- /* i2c_slave_buffer[i] = matrix[offset+i]; */
- i2c_slave_buffer[i] = matrix[offset+i];
- }
-#else // USE_SERIAL
- #ifdef SERIAL_USE_MULTI_TRANSACTION
- int change = 0;
- #endif
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- #ifdef SERIAL_USE_MULTI_TRANSACTION
- if( serial_slave_buffer[i] != matrix[offset+i] )
- change = 1;
- #endif
- serial_slave_buffer[i] = matrix[offset+i];
- }
- #ifdef SERIAL_USE_MULTI_TRANSACTION
- slave_buffer_change_count += change;
- #endif
-#endif
-}
-
-bool matrix_is_modified(void)
-{
- if (debouncing) return false;
- return true;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
- print("\nr/c 0123456789ABCDEF\n");
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- phex(row); print(": ");
- pbin_reverse16(matrix_get_row(row));
- print("\n");
- }
-}
-
-uint8_t matrix_key_count(void)
-{
- uint8_t count = 0;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- count += bitpop16(matrix[i]);
- }
- return count;
-}
-
-static void init_cols(void)
-{
- for(int x = 0; x < MATRIX_COLS; x++) {
- _SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF);
- _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF);
- }
-}
-
-static matrix_row_t read_cols(void)
-{
- matrix_row_t result = 0;
- for(int x = 0; x < MATRIX_COLS; x++) {
- result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x);
- }
- return result;
-}
-
-static void unselect_rows(void)
-{
- for(int x = 0; x < ROWS_PER_HAND; x++) {
- _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF);
- _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF);
- }
-}
-
-static void select_row(uint8_t row)
-{
- _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF);
- _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF);
-}
diff --git a/keyboards/treadstone48/rev1/rev1.c b/keyboards/treadstone48/rev1/rev1.c
index 2637864271..3daa3e8e81 100644
--- a/keyboards/treadstone48/rev1/rev1.c
+++ b/keyboards/treadstone48/rev1/rev1.c
@@ -1,15 +1,17 @@
-#include "treadstone48.h"
-
-
-#ifdef SSD1306OLED
-void led_set_kb(uint8_t usb_led) {
- // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
- //led_set_user(usb_led);
-}
-#endif
-
-void matrix_init_kb(void) {
-
- matrix_init_user();
-};
+/* Copyright 2020 marksard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "rev1.h"
diff --git a/keyboards/treadstone48/rev1/rev1.h b/keyboards/treadstone48/rev1/rev1.h
index 16ab2d716e..9a66d855d8 100644
--- a/keyboards/treadstone48/rev1/rev1.h
+++ b/keyboards/treadstone48/rev1/rev1.h
@@ -1,22 +1,31 @@
-#ifndef REV1_H
-#define REV1_CONFIG_H
-
-#include "../treadstone48.h"
+/* Copyright 2020 marksard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
#include "quantum.h"
-#ifdef RGBLIGHT_ENABLE
-//rgb led driver
-#include "ws2812.h"
-#endif
-
-#ifdef USE_I2C
-#include <stddef.h>
-#ifdef __AVR__
- #include <avr/io.h>
- #include <avr/interrupt.h>
-#endif
-#endif
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
// full Keymap
// (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left)
@@ -197,5 +206,3 @@
#endif
//////////////////////////////////////////////////////////////////////////////
-
-#endif
diff --git a/keyboards/treadstone48/rev1/rules.mk b/keyboards/treadstone48/rev1/rules.mk
deleted file mode 100644
index 6028b5a5b9..0000000000
--- a/keyboards/treadstone48/rev1/rules.mk
+++ /dev/null
@@ -1,3 +0,0 @@
-SRC += rev1/matrix.c
-SRC += rev1/split_util.c
-SRC += rev1/split_scomm.c
diff --git a/keyboards/treadstone48/rev1/serial_config.h b/keyboards/treadstone48/rev1/serial_config.h
deleted file mode 100644
index 37135213d5..0000000000
--- a/keyboards/treadstone48/rev1/serial_config.h
+++ /dev/null
@@ -1,8 +0,0 @@
-//// #error rev2 serial config
-
-#ifndef SOFT_SERIAL_PIN
-/* Soft Serial defines */
-#define SOFT_SERIAL_PIN D2
-
-#define SERIAL_USE_MULTI_TRANSACTION
-#endif
diff --git a/keyboards/treadstone48/rev1/serial_config_simpleapi.h b/keyboards/treadstone48/rev1/serial_config_simpleapi.h
deleted file mode 100644
index e2d22a41e7..0000000000
--- a/keyboards/treadstone48/rev1/serial_config_simpleapi.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef SERIAL_CONFIG_SIMPLEAPI_H
-#define SERIAL_CONFIG_SIMPLEAPI_H
-
-#undef SERIAL_USE_MULTI_TRANSACTION
-#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
-#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2
-
-#endif // SERIAL_CONFIG_SIMPLEAPI_H
diff --git a/keyboards/treadstone48/rev1/split_scomm.c b/keyboards/treadstone48/rev1/split_scomm.c
deleted file mode 100644
index ada7867960..0000000000
--- a/keyboards/treadstone48/rev1/split_scomm.c
+++ /dev/null
@@ -1,92 +0,0 @@
-#ifdef USE_SERIAL
-#ifdef SERIAL_USE_MULTI_TRANSACTION
-/* --- USE flexible API (using multi-type transaction function) --- */
-
-#include <stdbool.h>
-#include <stdint.h>
-#include <stddef.h>
-#include <split_scomm.h>
-#include "serial.h"
-#ifdef CONSOLE_ENABLE
- #include <print.h>
-#endif
-
-uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
-uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
-uint8_t volatile status_com = 0;
-uint8_t volatile status1 = 0;
-uint8_t slave_buffer_change_count = 0;
-uint8_t s_change_old = 0xff;
-uint8_t s_change_new = 0xff;
-
-SSTD_t transactions[] = {
-#define GET_SLAVE_STATUS 0
- /* master buffer not changed, only recive slave_buffer_change_count */
- { (uint8_t *)&status_com,
- 0, NULL,
- sizeof(slave_buffer_change_count), &slave_buffer_change_count,
- },
-#define PUT_MASTER_GET_SLAVE_STATUS 1
- /* master buffer changed need send, and recive slave_buffer_change_count */
- { (uint8_t *)&status_com,
- sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer,
- sizeof(slave_buffer_change_count), &slave_buffer_change_count,
- },
-#define GET_SLAVE_BUFFER 2
- /* recive serial_slave_buffer */
- { (uint8_t *)&status1,
- 0, NULL,
- sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer
- }
-};
-
-void serial_master_init(void)
-{
- soft_serial_initiator_init(transactions, TID_LIMIT(transactions));
-}
-
-void serial_slave_init(void)
-{
- soft_serial_target_init(transactions, TID_LIMIT(transactions));
-}
-
-// 0 => no error
-// 1 => slave did not respond
-// 2 => checksum error
-int serial_update_buffers(int master_update)
-{
- int status, smatstatus;
- static int need_retry = 0;
-
- if( s_change_old != s_change_new ) {
- smatstatus = soft_serial_transaction(GET_SLAVE_BUFFER);
- if( smatstatus == TRANSACTION_END ) {
- s_change_old = s_change_new;
-#ifdef CONSOLE_ENABLE
- uprintf("slave matrix = %b %b %b %b %b\n",
- serial_slave_buffer[0], serial_slave_buffer[1],
- serial_slave_buffer[2], serial_slave_buffer[3],
- serial_slave_buffer[4] );
-#endif
- }
- } else {
- // serial_slave_buffer dosen't change
- smatstatus = TRANSACTION_END; // dummy status
- }
-
- if( !master_update && !need_retry) {
- status = soft_serial_transaction(GET_SLAVE_STATUS);
- } else {
- status = soft_serial_transaction(PUT_MASTER_GET_SLAVE_STATUS);
- }
- if( status == TRANSACTION_END ) {
- s_change_new = slave_buffer_change_count;
- need_retry = 0;
- } else {
- need_retry = 1;
- }
- return smatstatus;
-}
-
-#endif // SERIAL_USE_MULTI_TRANSACTION
-#endif /* USE_SERIAL */
diff --git a/keyboards/treadstone48/rev1/split_scomm.h b/keyboards/treadstone48/rev1/split_scomm.h
deleted file mode 100644
index 16887eb74f..0000000000
--- a/keyboards/treadstone48/rev1/split_scomm.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#pragma once
-
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-/* --- USE Simple API (OLD API, compatible with let's split serial.c) --- */
-#include "serial.h"
-
-#else
-/* --- USE flexible API (using multi-type transaction function) --- */
-// Buffers for master - slave communication
-#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
-#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2
-
-extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
-extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
-extern uint8_t slave_buffer_change_count;
-
-void serial_master_init(void);
-void serial_slave_init(void);
-int serial_update_buffers(int master_changed);
-
-#endif
diff --git a/keyboards/treadstone48/rev1/split_util.c b/keyboards/treadstone48/rev1/split_util.c
deleted file mode 100644
index e1ff8b4379..0000000000
--- a/keyboards/treadstone48/rev1/split_util.c
+++ /dev/null
@@ -1,70 +0,0 @@
-#include <avr/io.h>
-#include <avr/wdt.h>
-#include <avr/power.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include <avr/eeprom.h>
-#include "split_util.h"
-#include "matrix.h"
-#include "keyboard.h"
-
-#ifdef USE_MATRIX_I2C
-# include "i2c.h"
-#else
-# include "split_scomm.h"
-#endif
-
-volatile bool isLeftHand = true;
-
-static void setup_handedness(void) {
- #ifdef EE_HANDS
- isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
- #else
- // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
- #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
- isLeftHand = !has_usb();
- #else
- isLeftHand = has_usb();
- #endif
- #endif
-}
-
-static void keyboard_master_setup(void) {
-
-#ifdef USE_MATRIX_I2C
- i2c_master_init();
-#else
- serial_master_init();
-#endif
-}
-
-static void keyboard_slave_setup(void) {
-
-#ifdef USE_MATRIX_I2C
- i2c_slave_init(SLAVE_I2C_ADDRESS);
-#else
- serial_slave_init();
-#endif
-}
-
-bool has_usb(void) {
- USBCON |= (1 << OTGPADE); //enables VBUS pad
- _delay_us(5);
- return (USBSTA & (1<<VBUS)); //checks state of VBUS
-}
-
-void split_keyboard_setup(void) {
- setup_handedness();
-
- if (has_usb()) {
- keyboard_master_setup();
- } else {
- keyboard_slave_setup();
- }
- sei();
-}
-
-// this code runs before the usb and keyboard is initialized
-void matrix_setup(void) {
- split_keyboard_setup();
-}
diff --git a/keyboards/treadstone48/rev1/split_util.h b/keyboards/treadstone48/rev1/split_util.h
deleted file mode 100644
index f593047560..0000000000
--- a/keyboards/treadstone48/rev1/split_util.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#pragma once
-
-#include <stdbool.h>
-#include "eeconfig.h"
-
-#define SLAVE_I2C_ADDRESS 0x32
-
-extern volatile bool isLeftHand;
-
-// slave version of matix scan, defined in matrix.c
-void matrix_slave_scan(void);
-
-void split_keyboard_setup(void);
-bool has_usb(void);
-
-void matrix_master_OLED_init (void);
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 16:37:49 +0000