diff options
Diffstat (limited to 'keyboards/thevankeyboards/roadkit')
29 files changed, 1488 insertions, 0 deletions
diff --git a/keyboards/thevankeyboards/roadkit/config.h b/keyboards/thevankeyboards/roadkit/config.h new file mode 100644 index 0000000000..9596f7f3b2 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/config.h @@ -0,0 +1,162 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEAE +#define PRODUCT_ID 0x8846 +#define DEVICE_VER 0x0001 +#define MANUFACTURER TheVan Keyboards +#define PRODUCT Roadkit Micro +#define DESCRIPTION keyboard firmware for Roadkit Micro + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 4 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { F0, F5, D7, B4 } +#define MATRIX_COL_PINS { F1, F4, D6, D4 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/thevankeyboards/roadkit/info.json b/keyboards/thevankeyboards/roadkit/info.json new file mode 100644 index 0000000000..839ac73fbf --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/info.json @@ -0,0 +1,15 @@ +{ + "keyboard_name": "Roadkit", + "url": "", + "maintainer": "qmk", + "width": 4, + "height": 4, + "layouts": { + "LAYOUT_numpad_4x4": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0, "h":2}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2, "h":2}, {"x":0, "y":3, "w":2}, {"x":2, "y":3}] + }, + "LAYOUT_ortho_4x4": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}] + } + } +} diff --git a/keyboards/thevankeyboards/roadkit/keymaps/default/config.h b/keyboards/thevankeyboards/roadkit/keymaps/default/config.h new file mode 100644 index 0000000000..df06a26206 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif
\ No newline at end of file diff --git a/keyboards/thevankeyboards/roadkit/keymaps/default/keymap.c b/keyboards/thevankeyboards/roadkit/keymaps/default/keymap.c new file mode 100644 index 0000000000..4ec0f6cfdc --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/default/keymap.c @@ -0,0 +1,48 @@ +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +#define _NP 0 + +// Macro name shortcuts +#define NUMPAD M(_NP) + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_NP] = LAYOUT_numpad_4x4( /* Numpad */ + KC_P7, KC_P8, KC_P9, KC_PPLS, \ + KC_P4, KC_P5, KC_P6, \ + KC_P1, KC_P2, KC_P3, KC_PENT, \ + KC_P0, KC_PDOT \ + ), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _NP: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_NP); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/thevankeyboards/roadkit/keymaps/default/readme.md b/keyboards/thevankeyboards/roadkit/keymaps/default/readme.md new file mode 100644 index 0000000000..5984a71d1a --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for roadkit diff --git a/keyboards/thevankeyboards/roadkit/keymaps/default/rules.mk b/keyboards/thevankeyboards/roadkit/keymaps/default/rules.mk new file mode 100644 index 0000000000..f4671a9d11 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/default/rules.mk @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/thevankeyboards/roadkit/keymaps/flipphone/config.h b/keyboards/thevankeyboards/roadkit/keymaps/flipphone/config.h new file mode 100644 index 0000000000..df06a26206 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/flipphone/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif
\ No newline at end of file diff --git a/keyboards/thevankeyboards/roadkit/keymaps/flipphone/keymap.c b/keyboards/thevankeyboards/roadkit/keymaps/flipphone/keymap.c new file mode 100644 index 0000000000..fed9d02706 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/flipphone/keymap.c @@ -0,0 +1,219 @@ +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +#ifdef BACKLIGHT_ENABLE + #include "backlight.h" +#endif + +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif + +void backlight_toggle(void){ +}; + +enum roadkit_layers { + _NUMPAD, + _FPH, + _FPHNOISY, + _ADJUST, + _DYN +}; + +enum roadkit_keycodes { + NUMPAD = SAFE_RANGE, + FPH_1, + FPH_2, + FPH_3, + FPH_4, + FPH_5, + FPH_6, + FPH_7, + FPH_8, + FPH_9, + FN_0, + BACKLIT, + MACSLEEP, + DYNAMIC_MACRO_RANGE, +}; + +#include "dynamic_macro.h" + +// Fillers to make keymaps cleaner looking +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_NUMPAD] = LAYOUT_numpad_4x4( /* Numpad */ + KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS, \ + KC_KP_4, KC_KP_5, KC_KP_6, \ + KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_ENTER, \ + LT(_ADJUST, KC_KP_0), KC_KP_DOT \ + ), + [_FPH] = LAYOUT_numpad_4x4( /* Quiet T9 */ + FPH_7, FPH_8, FPH_9, KC_KP_PLUS, \ + FPH_4, FPH_5, FPH_6, \ + FPH_1, FPH_2, FPH_3, SFT_T(KC_KP_ENTER), \ + LT(_ADJUST, KC_SPACE), KC_KP_DOT \ + ), + [_FPHNOISY] = LAYOUT_numpad_4x4( /* Noisy T9 */ + FPH_7, FPH_8, FPH_9, KC_KP_PLUS, \ + FPH_4, FPH_5, FPH_6, \ + FPH_1, FPH_2, FPH_3, SFT_T(KC_KP_ENTER), \ + LT(_ADJUST, KC_SPACE), KC_KP_DOT \ + ), + [_ADJUST] = LAYOUT_numpad_4x4( /* Adjustments */ + KC_NUMLOCK, TG(_FPHNOISY), TG(_FPH), TG(_NUMPAD), \ + KC_BSPC, BACKLIT, KC_DEL, \ + MACSLEEP, _______, _______, _______, \ + _______, MO(_DYN) \ + ), + [_DYN] = LAYOUT_numpad_4x4( /* DYNAMIC MACRO */ + DYN_REC_START1, DYN_REC_START2, _______, DYN_REC_STOP, \ + _______, _______, _______, \ + DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, _______, _______, \ + _______, _______ \ + ), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +uint16_t fph_tap_qty = false; +uint16_t fph_keycode = 0; // stores which spacebar was used, either raise or lower... + +uint16_t get_render_keycode(uint16_t keycode, uint16_t tap_qty){ // maybe replace shift with "mods" + tap_qty--; // reduce by one to match array indexes. + switch(keycode){ + case FPH_2: + {uint16_t kc[] = {KC_A, KC_B, KC_C}; + if(tap_qty % 6 > 2) + return LSFT(kc[tap_qty % 3]); + return kc[tap_qty % 3];} + break; + case FPH_3: + {uint16_t kc[] = {KC_D, KC_E, KC_F}; + if(tap_qty % 6 > 2) + return LSFT(kc[tap_qty % 3]); + return kc[tap_qty % 3];} + break; + case FPH_4: + {uint16_t kc[] = {KC_G, KC_H, KC_I}; + if(tap_qty % 6 > 2) + return LSFT(kc[tap_qty % 3]); + return kc[tap_qty % 3];} + break; + case FPH_5: + {uint16_t kc[] = {KC_J, KC_K, KC_L}; + if(tap_qty % 6 > 2) + return LSFT(kc[tap_qty % 3]); + return kc[tap_qty % 3];} + break; + case FPH_6: + {uint16_t kc[] = {KC_M, KC_N, KC_O}; + if(tap_qty % 6 > 2) + return LSFT(kc[tap_qty % 3]); + return kc[tap_qty % 3];} + break; + case FPH_7: + {uint16_t kc[] = {KC_P, KC_Q, KC_R, KC_S}; + if(tap_qty % 8 > 2) + return LSFT(kc[tap_qty % 4]); + return kc[tap_qty % 4];} + break; + case FPH_8: + {uint16_t kc[] = {KC_T, KC_U, KC_V}; + if(tap_qty % 8 > 2) + return LSFT(kc[tap_qty % 4]); + return kc[tap_qty % 4];} + break; + case FPH_9: + {uint16_t kc[] = {KC_W, KC_X, KC_Y, KC_Z}; + if(tap_qty % 8 > 2) + return LSFT(kc[tap_qty % 4]); + return kc[tap_qty % 4];} + break; + case FPH_1: + {uint16_t kc[] = {KC_COMM, LSFT(KC_SLSH), KC_EXLM, KC_AT, KC_MINS, KC_UNDS, KC_PLUS, \ + KC_SCLN, LSFT(KC_SCLN), KC_QUOT, LSFT(KC_QUOT), KC_TILD, \ + KC_PIPE, KC_BSLS, KC_HASH, LSFT(KC_4), KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, \ + KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR, LSFT(KC_COMM), LSFT(KC_DOT)}; + return kc[tap_qty % 26];} + } + return KC_NO; +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (!process_record_dynamic_macro(keycode, record)) { + return false; + } + uint8_t layer; + layer = biton32(layer_state); + + switch (keycode) { + case FPH_1 ... FPH_9: + if(layer == _FPHNOISY){ + if (record->event.pressed) { + if(fph_keycode != keycode) { // key change + fph_tap_qty = 0; + fph_keycode = keycode; + } else { // same key tapped again so erase and increment. + register_code(KC_BSPC); + unregister_code(KC_BSPC); + fph_tap_qty++; + } + uint16_t render_keycode = get_render_keycode(keycode, fph_tap_qty); + // find mods? Apply mods.. + register_code(render_keycode); + unregister_code(render_keycode); + } else { + // do we need to do anything on key-release? + } + } else { // not noisy, be demure . + if (record->event.pressed) { + if(fph_keycode != keycode) { // key change, kill everything. + uint16_t render_keycode = get_render_keycode(fph_keycode, fph_tap_qty); + // find mods? Apply mods.. + register_code(render_keycode); + unregister_code(render_keycode); + fph_keycode = keycode; + fph_tap_qty = 0; + } else { // same key tapped again so increment counter silently + fph_tap_qty++; + } + } else { + // do we need to do anything on key-release? + // maybe start a timer on this one? + } + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } + return false; + break; + case MACSLEEP: + if (record->event.pressed) { + register_code(KC_RSFT); + register_code(KC_RCTL); + register_code(KC_POWER); + unregister_code(KC_POWER); + unregister_code(KC_RCTL); + unregister_code(KC_RSFT); + } + return false; + break; + } + return true; +} diff --git a/keyboards/thevankeyboards/roadkit/keymaps/flipphone/readme.md b/keyboards/thevankeyboards/roadkit/keymaps/flipphone/readme.md new file mode 100644 index 0000000000..ad630be195 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/flipphone/readme.md @@ -0,0 +1,26 @@ +# Flip Phone layout for Roadkit + +BEWARE, THIS DOES NOT WORK YET. + +Uses the numpad with classic cellular phone style letters assigned to the numbers. + +# LAYERS + +* Numpad - The layer that matches the caps mostly +* FPH - Base layer for text +* FPHNOISY - Text layer that outputs every character and then backspaces as they're replaced +* DYN - dynamic macro layer for recording and playing macros + +## FPH + +Poke the "2" key twice and it makes "B". + +## FPHNOISY + +Poke the "2" key twice and it makes "A"+backspace+"B" so you can see it cycle through. + +## MACROS + +May be able to record macros with the T9 layer because the "KC_*"s are only sent +at the end. Trying to do a macro with T9NOISY would probably fill up the buffer +in just a few characters. diff --git a/keyboards/thevankeyboards/roadkit/keymaps/flipphone/rules.mk b/keyboards/thevankeyboards/roadkit/keymaps/flipphone/rules.mk new file mode 100644 index 0000000000..f4671a9d11 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/flipphone/rules.mk @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/thevankeyboards/roadkit/keymaps/khord/config.h b/keyboards/thevankeyboards/roadkit/keymaps/khord/config.h new file mode 100644 index 0000000000..da6ed7189c --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/khord/config.h @@ -0,0 +1,15 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here +#define TAPPING_TERM 175 + +#ifdef BACKLIGHT_ENABLE + #define BACKLIGHT_PIN B5 + #define BACKLIGHT_LEVELS 3 + #define BACKLIGHT_ON_STATE 0 +#endif + +#endif diff --git a/keyboards/thevankeyboards/roadkit/keymaps/khord/keymap.c b/keyboards/thevankeyboards/roadkit/keymaps/khord/keymap.c new file mode 100644 index 0000000000..9111f4f898 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/khord/keymap.c @@ -0,0 +1,112 @@ +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +#define _NP 0 +#define _L1 1 +#define _L2 2 + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +enum custom_keycodes { + NUMPAD = SAFE_RANGE, + ADMIN, + SMSPC1, + STR192, + STR255 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Numpad + * ,-----------------------. + * | 7 | 8 | 9 |Bksp | + * |-----`-----`-----`-----| + * | 4 | 5 | 6 | Tab | + * |-----`-----`-----`-----| + * | 1 | 2 | 3 |Enter| + * |-----`-----`-----`-----| + * | 0 |Space| . | / | + * `-----`-----`-----`-----' + * | L1 | L2 | | | Layer hold + */ + [_NP] = LAYOUT_ortho_4x4( /* Numpad */ + KC_P7, KC_P8, KC_P9, KC_BSPC, \ + KC_P4, KC_P5, KC_P6, KC_TAB, \ + KC_P1, KC_P2, KC_P3, KC_PENT, \ + LT(1, KC_P0), LT(2, KC_SPC), KC_PDOT, KC_PSLS + ), + + /* L1 + * ,-----------------------. + * |Reset| | | Del | + * |-----`-----`-----`-----| + * | Left| Down| Up |Right| + * |-----`-----`-----`-----| + * | 192.| 255 | | | + * |-----`-----`-----`-----| + * |_____| LED | . | | + * `-----`-----`-----`-----' + */ + [_L1] = LAYOUT_ortho_4x4( /* LAYER 1 */ + RESET, XXXXXXX, XXXXXXX, KC_DEL, \ + KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, \ + STR192, STR255, XXXXXXX, XXXXXXX, \ + _______, BL_STEP, _______, XXXXXXX + ), + + /* L2 + * ,-----------------------. + * | | | str | str | + * |-----`-----`-----`-----| + * | | | | | + * |-----`-----`-----`-----| + * | | | | | + * |-----`-----`-----`-----| + * | |_____| | | + * `-----`-----`-----`-----' + */ + [_L2] = LAYOUT_ortho_4x4( /* LAYER 2 */ + XXXXXXX, XXXXXXX, ADMIN, SMSPC1, \ + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ + XXXXXXX, _______, XXXXXXX, XXXXXXX + ) +}; + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case ADMIN: + if (record->event.pressed) { + SEND_STRING("Administrator"); + } + return false; + break; + case SMSPC1: + if (record->event.pressed) { + SEND_STRING("Simspace1!"); + } + return false; + break; + case STR192: + if (record->event.pressed) { + SEND_STRING("192.168."); + } + return false; + break; + case STR255: + if (record->event.pressed) { + SEND_STRING("255"); + } + return false; + break; + } + return true; +}; diff --git a/keyboards/thevankeyboards/roadkit/keymaps/khord/rules.mk b/keyboards/thevankeyboards/roadkit/keymaps/khord/rules.mk new file mode 100644 index 0000000000..9f3c958bd8 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/khord/rules.mk @@ -0,0 +1,22 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +TAP_DANCE_ENABLE = no # Enable Tap Dance functionality + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/thevankeyboards/roadkit/keymaps/mjt/config.h b/keyboards/thevankeyboards/roadkit/keymaps/mjt/config.h new file mode 100644 index 0000000000..df06a26206 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/mjt/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif
\ No newline at end of file diff --git a/keyboards/thevankeyboards/roadkit/keymaps/mjt/keymap.c b/keyboards/thevankeyboards/roadkit/keymaps/mjt/keymap.c new file mode 100644 index 0000000000..a1af5b1f28 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/mjt/keymap.c @@ -0,0 +1,239 @@ +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +#ifdef BACKLIGHT_ENABLE + #include "backlight.h" +#endif + +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif + +void backlight_toggle(void){ +}; + +enum roadkit_layers { + _NUMPAD, + _NAVIGATION, + _EXCEL, + _ADJUST, + _DYN +}; + +enum minivan_keycodes { + NUMPAD = SAFE_RANGE, + NAVIGATION, + EXCEL, + NUMPAD_LOCK, + NAVIGATION_LOCK, + EXCEL_LOCK, + PARENS, + BRACKETS, + BRACES, + BACKLIT, + MACSLEEP, + DYNAMIC_MACRO_RANGE, +}; + +#include "dynamic_macro.h" + +// Fillers to make keymaps cleaner looking +#define _______ KC_TRNS +#define XXXXXXX KC_NO + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_NUMPAD] = LAYOUT_numpad_4x4( /* Numpad */ + KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS, \ + KC_KP_4, KC_KP_5, KC_KP_6, \ + KC_KP_1, KC_KP_2, KC_KP_3, NAVIGATION, \ + EXCEL, KC_KP_DOT + ), + [_EXCEL] = LAYOUT_numpad_4x4( /* Excel related */ + KC_KP_SLASH, KC_KP_ASTERISK, KC_MINS, KC_TAB, \ + KC_QUOT, KC_KP_EQUAL, PARENS, \ + KC_DQT, BRACKETS, BRACES, _______, \ |