diff options
Diffstat (limited to 'keyboards/thedogkeyboard/config.h')
| -rw-r--r-- | keyboards/thedogkeyboard/config.h | 141 |
1 files changed, 0 insertions, 141 deletions
diff --git a/keyboards/thedogkeyboard/config.h b/keyboards/thedogkeyboard/config.h deleted file mode 100644 index 099c157cff..0000000000 --- a/keyboards/thedogkeyboard/config.h +++ /dev/null @@ -1,141 +0,0 @@ -/* -Copyright 2019 kakunpc - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0000 -#define DEVICE_VER 0x0001 -#define MANUFACTURER kakunpc -#define PRODUCT thedogkeyboard - -/* key matrix size */ -#define MATRIX_ROWS 20 -#define MATRIX_COLS 6 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B2, B6, B4, B5 } -#define MATRIX_COL_PINS { D1, D0, D4, C6, D7, E6 } -#define UNUSED_PINS - -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -#define RGB_DI_PIN D3 -#ifdef RGB_DI_PIN - #define RGBLED_NUM 111 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_LIMIT_VAL 50 /* The maximum brightness level */ - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// /*== all animations enable ==*/ -// #define RGBLIGHT_ANIMATIONS -// /*== or choose animations ==*/ -// #define RGBLIGHT_EFFECT_BREATHING -// #define RGBLIGHT_EFFECT_RAINBOW_MOOD -// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL -// #define RGBLIGHT_EFFECT_SNAKE -// #define RGBLIGHT_EFFECT_KNIGHT -// #define RGBLIGHT_EFFECT_CHRISTMAS -// #define RGBLIGHT_EFFECT_STATIC_GRADIENT -// #define RGBLIGHT_EFFECT_RGB_TEST -// #define RGBLIGHT_EFFECT_ALTERNATING -// /*== customize breathing effect ==*/ -// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -// /*==== use exp() and sin() ====*/ -// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -#endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 |