diff options
Diffstat (limited to 'keyboards/system76/launch_1/config.h')
| -rw-r--r-- | keyboards/system76/launch_1/config.h | 121 |
1 files changed, 121 insertions, 0 deletions
diff --git a/keyboards/system76/launch_1/config.h b/keyboards/system76/launch_1/config.h new file mode 100644 index 0000000000..19752d58de --- /dev/null +++ b/keyboards/system76/launch_1/config.h @@ -0,0 +1,121 @@ +/* + * Copyright (C) 2021 System76 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +// USB device descriptor parameter +#define VENDOR_ID 0x3384 +#define PRODUCT_ID 0x0001 +#define DEVICE_VER 0x0001 +#define MANUFACTURER System76 +#define PRODUCT Launch Configurable Keyboard (launch_1) + +// Key matrix size +#define MATRIX_ROWS 6 +#define MATRIX_COLS 14 + +/* + * Key matrix pins + * ROWS: AVR pins used for rows, top to bottom + * COLS: AVR pins used for columns, left to right + */ +#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6, F7 } +#define MATRIX_COL_PINS { D7, C7, C6, B6, B5, B4, D6, D4, E6, D5, D3, D2, B7, B0 } +#define UNUSED_PINS + +/* + * Diode Direction + * COL2ROW = COL => Anode (+), ROW => Cathode (-) + * ROW2COL = ROW => Anode (+), COL => Cathode (-) + */ +#define DIODE_DIRECTION COL2ROW + +// Set 0 if debouncing isn't needed +#define DEBOUNCE 5 + +#ifdef RGB_MATRIX_ENABLE +# define RGB_DI_PIN E2 +# define DRIVER_LED_TOTAL 84 +# define RGB_MATRIX_KEYPRESSES // Reacts to keypresses +// # define RGB_MATRIX_KEYRELEASES // Reacts to keyreleases (instead of keypresses) +// # define RGB_MATRIX_FRAMEBUFFER_EFFECTS // Enables framebuffer effects +# define RGB_DISABLE_TIMEOUT 0 // Number of milliseconds to wait until RGB automatically turns off +# define RGB_DISABLE_AFTER_TIMEOUT 0 // OBSOLETE: Number of ticks to wait until disabling effects +# define RGB_DISABLE_WHEN_USB_SUSPENDED // Turns off effects when suspended +// Limit brightness to support USB-A at 0.5 A +// TODO: Do this dynamically based on power source +# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 176 // Limits maximum brightness of LEDs to 176 out of 255. If not defined, maximum brightness is set to 255 +# define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Sets the default mode, if none has been set +# define RGB_MATRIX_STARTUP_HUE 142 // Sets the default hue value, if none has been set +# define RGB_MATRIX_STARTUP_SAT 255 // Sets the default saturation value, if none has been set +# define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS // Sets the default brightness value, if none has been set +# define RGB_MATRIX_STARTUP_SPD 127 // Sets the default animation speed, if none has been set +# define RGB_MATRIX_DISABLE_KEYCODES // Disables control of rgb matrix by keycodes (must use code functions to control the feature) + +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +#endif // RGB_MATRIX_ENABLE + +// Mechanical locking support; use KC_LCAP, KC_LNUM, or KC_LSCR instead in keymap +#define LOCKING_SUPPORT_ENABLE + +// Locking resynchronize hack +#define LOCKING_RESYNC_ENABLE + +// I2C { +#define F_SCL 100000UL // Run I2C bus at 100 kHz +#define I2C_START_RETRY_COUNT 20 +#define I2C_TIMEOUT 100 // milliseconds +// } I2C + +// EEPROM { +#define EEPROM_SIZE 1024 +// TODO: Refactor with new user EEPROM code (coming soon) +#define EEPROM_MAGIC 0x76EC +#define EEPROM_MAGIC_ADDR 64 +// Bump this every time we change what we store +// This will automatically reset the EEPROM with defaults +// and avoid loading invalid data from the EEPROM +#define EEPROM_VERSION 0x02 +#define EEPROM_VERSION_ADDR (EEPROM_MAGIC_ADDR + 2) +// } EEPROM + +// Dynamic keymap { +#define DYNAMIC_KEYMAP_LAYER_COUNT 4 +#define DYNAMIC_KEYMAP_MACRO_COUNT 0 +// Dynamic keymap starts after EEPROM version +#define DYNAMIC_KEYMAP_EEPROM_ADDR (EEPROM_VERSION_ADDR + 1) +// Dynamic macro starts after dynamic keymaps, it is disabled +#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR (DYNAMIC_KEYMAP_EEPROM_ADDR + (DYNAMIC_KEYMAP_LAYER_COUNT * MATRIX_ROWS * MATRIX_COLS * 2)) +#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 0 +// } Dynamic keymap + +// System76 EC { +#define SYSTEM76_EC_EEPROM_ADDR (DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR + DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE) +#define SYSTEM76_EC_EEPROM_SIZE (EEPROM_SIZE - SYSTEM76_EC_EEPROM_ADDR) +// } System76 EC |