diff options
Diffstat (limited to 'keyboards/switchplate')
26 files changed, 0 insertions, 1370 deletions
diff --git a/keyboards/switchplate/readme.md b/keyboards/switchplate/readme.md deleted file mode 100644 index 166853f285..0000000000 --- a/keyboards/switchplate/readme.md +++ /dev/null @@ -1,4 +0,0 @@ -# Switchplate Peripherals -All keyboards under the Switchplate Peripherals brand - -Website: [here](https://switchplate.co/)
\ No newline at end of file diff --git a/keyboards/switchplate/southpaw_65/dev.md b/keyboards/switchplate/southpaw_65/dev.md deleted file mode 100644 index 08a333f2d3..0000000000 --- a/keyboards/switchplate/southpaw_65/dev.md +++ /dev/null @@ -1,141 +0,0 @@ -# Southpaw Extended 65% - -Development docs covering the following: -- Kimera core -- RGB -- Backlight - -## Kimera core - - -What little available info that was available for the qmk port -- atmega32u4 16Mhz -- board seems to have a 6Mhz crystal -- 2x PCA9555 I2C IO expander - -Links: -- [Schematic, BOM, Gerbers](/kairyu/kimera/blob/master/kimera_core) -- [Original firmware](https://github.com/kairyu/tmk_keyboard_custom/tree/master/keyboard/kimera) - -```c -/* -Kimera_core_v1.0 Components - - U1 (atmega32u4) - ,----------------. - TX --| TX0(PD3) RAW |-- - RX --| RX1(PD2) GND |-- - --| GND RESET |-- RST - --| GND VCC |-- - SDA --| 2(PD1) (PF4)A3 |-- - SCL --| 3(PD0) (PF5)A2 |-- - (INT) --| 4(PD4) (PF6)A1 |-- - --| 5(PC6) (PF7)A0 |-- - --| 6(PD7) (PB1)15 |-- SCK - LED2 --| 7(PE6) (PB3)14 |-- MISO - LED1 --| 8(PB4) (PB2)16 |-- MOSI - LED3 --| 9(PB5) (PB6)10 |-- LED4 - `----------------' - - IC1 (PCA9555) IC2 (PCA9555) - ,----------. ,----------. - SDA --| SDA P00 |-- P1 SDA --| SDA P00 |-- P17 - SCL --| SCL P01 |-- P2 SCL --| SCL P01 |-- P18 - INT --| INT P02 |-- P3 INT --| INT P02 |-- P19 - | P03 |-- P4 | P03 |-- P20 - GND --| A0 P04 |-- P5 VCC --| A0 P04 |-- P21 - SJ1 --| A1 P05 |-- P6 SJ1 --| A1 P05 |-- P22 - SJ2 --| A2 P06 |-- P7 SJ2 --| A2 P06 |-- P23 - | P07 |-- P8 | P07 |-- P24 - | | | | - | P10 |-- P9 | P10 |-- P25 - | P11 |-- P10 | P11 |-- P26 - | P12 |-- P11 | P12 |-- P27 - | P13 |-- P12 | P13 |-- P28 - | P14 |-- P13 | P14 |-- P29 - | P15 |-- P14 | P15 |-- P30 - | P16 |-- P15 | P16 |-- P31 - | P17 |-- P16 | P17 |-- P32 - `----------' `----------' -*/ - -``` - -### Bootloader -Default bootloader is `atmel-dfu`. -Reboot to bootloader via magnetic switch next to icsp header. -Flash using regular dfu methods. - -### Southpaw Extended 65 pin mappings -Taken from [kimera-config.json](https://github.com/kairyu/tkg/blob/master/keyboard/config/kimera-config.json) - - "row_mapping": [ 2, 3, 4, 5, 6 ], - "col_mapping": [ 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31 ], - -# RGB -- PIN C7 -- Number of RGB LED 7 - -# Backlight -- PIN B5 - -# Capslock -- PIN B6 - -# Numlock -- PIN C6 - -## Assumptions -### Pin/Port mappings -- All cols are on the same IC -- All rows are on the same IC and port -- Pins mapped sequentially -- Each port only does row or column not a mixture of both - - No need to have complex port config - - - -| ROW index | Kimera Pin | PCA9555 | -| ----------|------------|-------------------| -| 0 | 2 | IC1 Port 0 pin 1 | -| 1 | 3 | IC1 Port 0 pin 2 | -| 2 | 4 | IC1 Port 0 pin 3 | -| 3 | 5 | IC1 Port 0 pin 4 | -| 4 | 6 | IC1 Port 0 pin 5 | - -- Safe enough to assume `row_index == pin` - - -| COL index | Kimera Pin | PCA9555 | -| ----------|------------|-------------------| -| 0 | 13 | IC1 Port 1 pin 4 | -| 1 | 14 | IC1 Port 1 pin 5 | -| 2 | 15 | IC1 Port 1 pin 6 | -| 3 | 16 | IC1 Port 1 pin 7 | -| 4 | 17 | IC2 Port 0 pin 0 | -| 5 | 18 | IC2 Port 0 pin 1 | -| 6 | 19 | IC2 Port 0 pin 2 | -| 7 | 20 | IC2 Port 0 pin 3 | -| 8 | 21 | IC2 Port 0 pin 4 | -| 9 | 22 | IC2 Port 0 pin 5 | -| 10 | 23 | IC2 Port 0 pin 6 | -| 11 | 24 | IC2 Port 0 pin 7 | -| 12 | 25 | IC2 Port 1 pin 0 | -| 13 | 26 | IC2 Port 1 pin 1 | -| 14 | 27 | IC2 Port 1 pin 2 | -| 15 | 28 | IC2 Port 1 pin 3 | -| 16 | 29 | IC2 Port 1 pin 4 | -| 17 | 30 | IC2 Port 1 pin 5 | -| 18 | 31 | IC2 Port 1 pin 6 | - -- Need to read both ICs and corresponding port to compile the correct column data -- All pins are mapped sequentially -- maps to the usual practice of reading matrix columns -- Needs uint32_t to read 19 columns of data - -## Notes -[pca9555 datasheet](https://www.ti.com/lit/ds/symlink/pca9555.pdf) - -- Other Kimera based boards with non sequential pin mappings, pins mapped across ICs, or mixed row/col configs will need more complicated `pin -> i2c_addr,port,pin` logic as well as rather more complex pin functions. - -## Return to stock firmware -To return back to stock TMK firmware, use [programming guide provided by Reconsiderit](https://geekhack.org/index.php?topic=92344.msg2625784#msg2625784) diff --git a/keyboards/switchplate/southpaw_65/info.json b/keyboards/switchplate/southpaw_65/info.json deleted file mode 100644 index 0a47fd95b2..0000000000 --- a/keyboards/switchplate/southpaw_65/info.json +++ /dev/null @@ -1,22 +0,0 @@ -{ - "keyboard_name": "Southpaw Extended 65%", - "manufacturer": "Switchplate Peripherals", - "url": "https://geekhack.org/index.php?topic=92344.0", - "maintainer": "qmk", - "usb": { - "vid": "0xFEED", - "pid": "0x4084", - "device_version": "0.0.1" - }, - "layouts": { - "LAYOUT_all": { - "layout": [{"label":"Num Lock", "x":0, "y":0}, {"label":"/", "x":1, "y":0}, {"label":"*", "x":2, "y":0}, {"label":"-", "x":3, "y":0}, {"label":"Esc", "x":4, "y":0}, {"label":"!", "x":5, "y":0}, {"label":"@", "x":6, "y":0}, {"label":"#", "x":7, "y":0}, {"label":"$", "x":8, "y":0}, {"label":"%", "x":9, "y":0}, {"label":"^", "x":10, "y":0}, {"label":"&", "x":11, "y":0}, {"label":"*", "x":12, "y":0}, {"label":"(", "x":13, "y":0}, {"label":")", "x":14, "y":0}, {"label":"_", "x":15, "y":0}, {"label":"+", "x":16, "y":0}, {"label":"Backspace", "x":17, "y":0}, {"label":"Backspace", "x":18, "y":0}, {"label":"Home", "x":19, "y":0}, {"label":"7", "x":0, "y":1}, {"label":"8", "x":1, "y":1}, {"label":"9", "x":2, "y":1}, {"label":"+", "x":3, "y":1}, {"label":"Tab", "x":4, "y":1, "w":1.5}, {"label":"Q", "x":5.5, "y":1}, {"label":"W", "x":6.5, "y":1}, {"label":"E", "x":7.5, "y":1}, {"label":"R", "x":8.5, "y":1}, {"label":"T", "x":9.5, "y":1}, {"label":"Y", "x":10.5, "y":1}, {"label":"U", "x":11.5, "y":1}, {"label":"I", "x":12.5, "y":1}, {"label":"O", "x":13.5, "y":1}, {"label":"P", "x":14.5, "y":1}, {"label":"{", "x":15.5, "y":1}, {"label":"}", "x":16.5, "y":1}, {"label":"|", "x":17.5, "y":1, "w":1.5}, {"label":"End", "x":19, "y":1}, {"label":"4", "x":0, "y":2}, {"label":"5", "x":1, "y":2}, {"label":"6", "x":2, "y":2}, {"label":"+", "x":3, "y":2}, {"label":"Caps Lock", "x":4, "y":2, "w":1.75}, {"label":"A", "x":5.75, "y":2}, {"label":"S", "x":6.75, "y":2}, {"label":"D", "x":7.75, "y":2}, {"label":"F", "x":8.75, "y":2}, {"label":"G", "x":9.75, "y":2}, {"label":"H", "x":10.75, "y":2}, {"label":"J", "x":11.75, "y":2}, {"label":"K", "x":12.75, "y":2}, {"label":"L", "x":13.75, "y":2}, {"label":":", "x":14.75, "y":2}, {"label":"\"", "x":15.75, "y":2}, {"label":"~", "x":16.75, "y":2}, {"label":"Enter", "x":17.75, "y":2, "w":1.25}, {"label":"Page Up", "x":19, "y":2}, {"label":"1", "x":0, "y":3}, {"label":"2", "x":1, "y":3}, {"label":"3", "x":2, "y":3}, {"label":"Num Enter", "x":3, "y":3}, {"label":"LShift", "x":4, "y":3, "w":1.25}, {"label":"|", "x":5.25, "y":3}, {"label":"Z", "x":6.25, "y":3}, {"label":"X", "x":7.25, "y":3}, {"label":"C", "x":8.25, "y":3}, {"label":"V", "x":9.25, "y":3}, {"label":"B", "x":10.25, "y":3}, {"label":"N", "x":11.25, "y":3}, {"label":"M", "x":12.25, "y":3}, {"label":"<", "x":13.25, "y":3}, {"label":">", "x":14.25, "y":3}, {"label":"?", "x":15.25, "y":3}, {"label":"RShift", "x":16.25, "y":3, "w":1.75}, {"label":"Up", "x":18, "y":3}, {"label":"Page Down", "x":19, "y":3}, {"label":"0", "x":0, "y":4}, {"label":"0", "x":1, "y":4}, {"label":".", "x":2, "y":4}, {"label":"Num Enter", "x":3, "y":4}, {"label":"LCtrl", "x":4, "y":4, "w":1.25}, {"label":"Win", "x":5.25, "y":4, "w":1.25}, {"label":"LAlt", "x":6.5, "y":4, "w":1.25}, {"label":"Space", "x":7.75, "y":4, "w":6.25}, {"label":"RAlt", "x":14, "y":4}, {"label":"RCtrl", "x":15, "y":4}, {"label":"Fn0", "x":16, "y":4}, {"label":"Left", "x":17, "y":4}, {"label":"Down", "x":18, "y":4}, {"label":"Right", "x":19, "y":4}] - }, - "LAYOUT_ansi": { - "layout": [{"label":"Num Lock", "x":0, "y":0}, {"label":"/", "x":1, "y":0}, {"label":"*", "x":2, "y":0}, {"label":"-", "x":3, "y":0}, {"label":"Esc", "x":4, "y":0}, {"label":"!", "x":5, "y":0}, {"label":"@", "x":6, "y":0}, {"label":"#", "x":7, "y":0}, {"label":"$", "x":8, "y":0}, {"label":"%", "x":9, "y":0}, {"label":"^", "x":10, "y":0}, {"label":"&", "x":11, "y":0}, {"label":"*", "x":12, "y":0}, {"label":"(", "x":13, "y":0}, {"label":")", "x":14, "y":0}, {"label":"_", "x":15, "y":0}, {"label":"+", "x":16, "y":0}, {"label":"Backspace", "x":17, "y":0, "w":2}, {"label":"Home", "x":19, "y":0}, {"label":"7", "x":0, "y":1}, {"label":"8", "x":1, "y":1}, {"label":"9", "x":2, "y":1}, {"label":"+", "x":3, "y":1, "h":2}, {"label":"Tab", "x":4, "y":1, "w":1.5}, {"label":"Q", "x":5.5, "y":1}, {"label":"W", "x":6.5, "y":1}, {"label":"E", "x":7.5, "y":1}, {"label":"R", "x":8.5, "y":1}, {"label":"T", "x":9.5, "y":1}, {"label":"Y", "x":10.5, "y":1}, {"label":"U", "x":11.5, "y":1}, {"label":"I", "x":12.5, "y":1}, {"label":"O", "x":13.5, "y":1}, {"label":"P", "x":14.5, "y":1}, {"label":"{", "x":15.5, "y":1}, {"label":"}", "x":16.5, "y":1}, {"label":"|", "x":17.5, "y":1, "w":1.5}, {"label":"End", "x":19, "y":1}, {"label":"4", "x":0, "y":2}, {"label":"5", "x":1, "y":2}, {"label":"6", "x":2, "y":2}, {"label":"Caps Lock", "x":4, "y":2, "w":1.75}, {"label":"A", "x":5.75, "y":2}, {"label":"S", "x":6.75, "y":2}, {"label":"D", "x":7.75, "y":2}, {"label":"F", "x":8.75, "y":2}, {"label":"G", "x":9.75, "y":2}, {"label":"H", "x":10.75, "y":2}, {"label":"J", "x":11.75, "y":2}, {"label":"K", "x":12.75, "y":2}, {"label":"L", "x":13.75, "y":2}, {"label":":", "x":14.75, "y":2}, {"label":"\"", "x":15.75, "y":2}, {"label":"Enter", "x":16.75, "y":2, "w":2.25}, {"label":"Page Up", "x":19, "y":2}, {"label":"1", "x":0, "y":3}, {"label":"2", "x":1, "y":3}, {"label":"3", "x":2, "y":3}, {"label":"Num Enter", "x":3, "y":3, "h":2}, {"label":"LShift", "x":4, "y":3, "w":2.25}, {"label":"Z", "x":6.25, "y":3}, {"label":"X", "x":7.25, "y":3}, {"label":"C", "x":8.25, "y":3}, {"label":"V", "x":9.25, "y":3}, {"label":"B", "x":10.25, "y":3}, {"label":"N", "x":11.25, "y":3}, {"label":"M", "x":12.25, "y":3}, {"label":"<", "x":13.25, "y":3}, {"label":">", "x":14.25, "y":3}, {"label":"?", "x":15.25, "y":3}, {"label":"RShift", "x":16.25, "y":3, "w":1.75}, {"label":"Up", "x":18, "y":3}, {"label":"Page Down", "x":19, "y":3}, {"label":"0", "x":0, "y":4, "w":2}, {"label":".", "x":2, "y":4}, {"label":"LCtrl", "x":4, "y":4, "w":1.25}, {"label":"Win", "x":5.25, "y":4, "w":1.25}, {"label":"LAlt", "x":6.5, "y":4, "w":1.25}, {"label":"Space", "x":7.75, "y":4, "w":6.25}, {"label":"RAlt", "x":14, "y":4}, {"label":"RCtrl", "x":15, "y":4}, {"label":"Fn0", "x":16, "y":4}, {"label":"Left", "x":17, "y":4}, {"label":"Down", "x":18, "y":4}, {"label":"Right", "x":19, "y":4}] - }, - "LAYOUT_iso": { - "layout": [{"label":"Num Lock", "x":0, "y":0}, {"label":"/", "x":1, "y":0}, {"label":"*", "x":2, "y":0}, {"label":"-", "x":3, "y":0}, {"label":"Esc", "x":4, "y":0}, {"label":"!", "x":5, "y":0}, {"label":"@", "x":6, "y":0}, {"label":"#", "x":7, "y":0}, {"label":"$", "x":8, "y":0}, {"label":"%", "x":9, "y":0}, {"label":"^", "x":10, "y":0}, {"label":"&", "x":11, "y":0}, {"label":"*", "x":12, "y":0}, {"label":"(", "x":13, "y":0}, {"label":")", "x":14, "y":0}, {"label":"_", "x":15, "y":0}, {"label":"+", "x":16, "y":0}, {"label":"Backspace", "x":17, "y":0, "w":2}, {"label":"Home", "x":19, "y":0}, {"label":"7", "x":0, "y":1}, {"label":"8", "x":1, "y":1}, {"label":"9", "x":2, "y":1}, {"label":"+", "x":3, "y":1, "h":2}, {"label":"Tab", "x":4, "y":1, "w":1.5}, {"label":"Q", "x":5.5, "y":1}, {"label":"W", "x":6.5, "y":1}, {"label":"E", "x":7.5, "y":1}, {"label":"R", "x":8.5, "y":1}, {"label":"T", "x":9.5, "y":1}, {"label":"Y", "x":10.5, "y":1}, {"label":"U", "x":11.5, "y":1}, {"label":"I", "x":12.5, "y":1}, {"label":"O", "x":13.5, "y":1}, {"label":"P", "x":14.5, "y":1}, {"label":"{", "x":15.5, "y":1}, {"label":"}", "x":16.5, "y":1}, {"label":"End", "x":19, "y":1}, {"label":"4", "x":0, "y":2}, {"label":"5", "x":1, "y":2}, {"label":"6", "x":2, "y":2}, {"label":"Caps Lock", "x":4, "y":2, "w":1.75}, {"label":"A", "x":5.75, "y":2}, {"label":"S", "x":6.75, "y":2}, {"label":"D", "x":7.75, "y":2}, {"label":"F", "x":8.75, "y":2}, {"label":"G", "x":9.75, "y":2}, {"label":"H", "x":10.75, "y":2}, {"label":"J", "x":11.75, "y":2}, {"label":"K", "x":12.75, "y":2}, {"label":"L", "x":13.75, "y":2}, {"label":":", "x":14.75, "y":2}, {"label":"\"", "x":15.75, "y":2}, {"label":"~", "x":16.75, "y":2}, {"label":"Enter", "x":17.75, "y":1, "w":1.25, "h":2}, {"label":"Page Up", "x":19, "y":2}, {"label":"1", "x":0, "y":3}, {"label":"2", "x":1, "y":3}, {"label":"3", "x":2, "y":3}, {"label":"Num Enter", "x":3, "y":3, "h":2}, {"label":"LShift", "x":4, "y":3, "w":1.25}, {"label":"|", "x":5.25, "y":3}, {"label":"Z", "x":6.25, "y":3}, {"label":"X", "x":7.25, "y":3}, {"label":"C", "x":8.25, "y":3}, {"label":"V", "x":9.25, "y":3}, {"label":"B", "x":10.25, "y":3}, {"label":"N", "x":11.25, "y":3}, {"label":"M", "x":12.25, "y":3}, {"label":"<", "x":13.25, "y":3}, {"label":">", "x":14.25, "y":3}, {"label":"?", "x":15.25, "y":3}, {"label":"RShift", "x":16.25, "y":3, "w":1.75}, {"label":"Up", "x":18, "y":3}, {"label":"Page Down", "x":19, "y":3}, {"label":"0", "x":0, "y":4, "w":2}, {"label":".", "x":2, "y":4}, {"label":"LCtrl", "x":4, "y":4, "w":1.25}, {"label":"Win", "x":5.25, "y":4, "w":1.25}, {"label":"LAlt", "x":6.5, "y":4, "w":1.25}, {"label":"Space", "x":7.75, "y":4, "w":6.25}, {"label":"RAlt", "x":14, "y":4}, {"label":"RCtrl", "x":15, "y":4}, {"label":"Fn0", "x":16, "y":4}, {"label":"Left", "x":17, "y":4}, {"label":"Down", "x":18, "y":4}, {"label":"Right", "x":19, "y":4}] - } - } -} diff --git a/keyboards/switchplate/southpaw_65/matrix.c b/keyboards/switchplate/southpaw_65/matrix.c deleted file mode 100644 index 5895750f89..0000000000 --- a/keyboards/switchplate/southpaw_65/matrix.c +++ /dev/null @@ -1,98 +0,0 @@ -/* Copyright 2019 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include <stdint.h> -#include <stdbool.h> -#include <avr/io.h> -#include <string.h> -#include "matrix.h" -#include "pca9555.h" -#include "quantum.h" - -#include "debug.h" - -// PCA9555 slave addresses -#define IC1 0x20 -#define IC2 0x21 - -//_____Utility funcs___________________________________________________________ - -static void init_pins(void) { - // init all rows - IC1 port0 input - pca9555_set_config(IC1, PCA9555_PORT0, ALL_INPUT); // same as initial state - - // init all cols high - IC2 all input - pca9555_set_config(IC1, PCA9555_PORT1, ALL_INPUT); // same as initial state - pca9555_set_config(IC2, PCA9555_PORT0, ALL_INPUT); // same as initial state - pca9555_set_config(IC2, PCA9555_PORT1, ALL_INPUT); // same as initial state - - pca9555_set_output(IC1, PCA9555_PORT0, ALL_LOW); -} - -static void select_row(uint8_t row) { - // For the Southpaw Ext 65% pins 1-6 are used for the rows - uint8_t pin = row; - uint8_t mask = 2 << pin; - - pca9555_set_config(IC1, PCA9555_PORT0, ALL_INPUT & (~mask)); -} - -static uint32_t read_cols(void) { - //Read column inputs. Pins 13-31 are used. Split across both ICs but they are sequential - uint8_t state_1 = 0; - uint8_t state_2 = 0; - uint8_t state_3 = 0; - pca9555_readPins(IC2, PCA9555_PORT0, &state_1); - pca9555_readPins(IC2, PCA9555_PORT1, &state_2); - pca9555_readPins(IC1, PCA9555_PORT1, &state_3); - - uint32_t state = ((((uint32_t)state_3 & 0b01111111) << 12) | ((uint32_t)state_2 << 4) | (((uint32_t)state_1 & 0b11110000) >> 4)); - return ~state; -} - -static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) { - // Store last value of row prior to reading - matrix_row_t last_row_value = current_matrix[current_row]; - - // Clear data in matrix row - current_matrix[current_row] = 0; - - // Select row and wait for row selection to stabilize - select_row(current_row); - // Skip the wait_us(30); as i2c is slow enough to debounce the io changes - - current_matrix[current_row] = read_cols(); - - // No need to Unselect row as the next `select_row` will blank everything - - return (last_row_value != current_matrix[current_row]); -} - -//_____CUSTOM MATRIX IMPLEMENTATION____________________________________________________ - -void matrix_init_custom(void) { - pca9555_init(IC1); - pca9555_init(IC2); - - init_pins(); -} - -bool matrix_scan_custom(matrix_row_t current_matrix[]) { - bool changed = false; - for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { - changed |= read_cols_on_row(current_matrix, current_row); - } - return changed; -} diff --git a/keyboards/switchplate/southpaw_65/readme.md b/keyboards/switchplate/southpaw_65/readme.md deleted file mode 100644 index 3566744b26..0000000000 --- a/keyboards/switchplate/southpaw_65/readme.md +++ /dev/null @@ -1,23 +0,0 @@ -# Southpaw Extended 65% - - - -Left Hand Number Pad Keyboard with 85 Keys & RGB LED Underglow -- Designed by Reconsiderit -- Up to 91 keys -- iso and ansi support -- Uses Kimera core - -* Keyboard Maintainer: QMK Community -* Hardware Supported: Southpaw Extended 65% -* Hardware Availability: [Geekhack GB Thread](https://geekhack.org/index.php?topic=92344.0) - -Make example for this keyboard (after setting up your build environment): - - make switchplate/southpaw_65:default_ansi - -Install examples: - - make switchplate/southpaw_65:default_ansi:flash - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/switchplate/southpaw_65/rules.mk b/keyboards/switchplate/southpaw_65/rules.mk deleted file mode 100644 index 864e780606..0000000000 --- a/keyboards/switchplate/southpaw_65/rules.mk +++ /dev/null @@ -1,26 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no # Enable N-Key Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output -LTO_ENABLE = yes - -# custom matrix setup -CUSTOM_MATRIX = lite - -VPATH += drivers/gpio -SRC += pca9555.c matrix.c -QUANTUM_LIB_SRC += i2c_master.c diff --git a/keyboards/switchplate/southpaw_65/southpaw_65.c b/keyboards/switchplate/southpaw_65/southpaw_65.c deleted file mode 100644 index 78df3b6653..0000000000 --- a/keyboards/switchplate/southpaw_65/southpaw_65.c +++ /dev/null @@ -1,30 +0,0 @@ -/* Copyright 2019 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include "southpaw_65.h" - -void keyboard_pre_init_kb(void) { - setPinOutput(B6); - - keyboard_pre_init_user(); -} - -bool led_update_kb(led_t led_state) { - bool res = led_update_user(led_state); - if(res) { - writePin(B6, !led_state.caps_lock); - } - return res; -} diff --git a/keyboards/switchplate/southpaw_65/southpaw_65.h b/keyboards/switchplate/southpaw_65/southpaw_65.h deleted file mode 100644 index a2b58d8c15..0000000000 --- a/keyboards/switchplate/southpaw_65/southpaw_65.h +++ /dev/null @@ -1,69 +0,0 @@ -/* Copyright 2019 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#pragma once - -#include "quantum.h" -#define ____ KC_NO - -/* This a shortcut to help you visually see your layout. - * - * The first section contains all of the arguments representing the physical - * layout of the board and position of the keys. - * - * The second converts the arguments into a two-dimensional array which - * represents the switch matrix. - */ -#define LAYOUT_all( \ - K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K117, K118, K514, K119, \ - K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, K217, K218, K219, \ - K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, K317, K318, K319, \ - K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, K415, K416, K417, K418, K419, \ - K501, K502, K503, K504, K505, K506, K507, K510, K515, K516, K513, K517, K518, K519 \ -) { \ - { K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K117, K118, K119 }, \ - { K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, K217, K218, K219 }, \ - { K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, K317, K318, K319 }, \ - { K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, K415, K416, K417, K418, K419 }, \ - { K501, K502, K503, K504, K505, K506, K507, ____, ____, K510, ____, ____, K513, K514, K515, K516, K517, K518, K519 } \ -} - -#define LAYOUT_ansi( \ - K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K117, K118, K119, \ - K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, K217, K218, K219, \ - K301, K302, K303, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, K318, K319, \ - K401, K402, K403, K404, K405, K407, K408, K409, K410, K411, K412, K413, K414, K415, K416, K417, K418, K419, \ - K501, K503, K505, K506, K507, K510, K515, K516, K513, K517, K518, K519 \ -) { \ - { K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K117, K118, K119 }, \ - { K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, K217, K218, K219 }, \ - { K301, K302, K303, ____, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, ____, K318, K319 }, \ - { K401, K402, K403, K404, K405, ____, K407, K408, K409, K410, K411, K412, K413, K414, K415, K416, K417, K418, K419 }, \ - { K501, ____, K503, ____, K505, K506, K507, ____, ____, K510, ____, ____, K513, ____, K515, K516, K517, K518, K519 } \ -} - -#define LAYOUT_iso( \ - K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K117, K118, K119, \ - K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, K217, K219, \ - K301, K302, K303, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, K317, K318, K319, \ - K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, K415, K416, K417, K418, K419, \ - K501, K503, K505, K506, K507, K510, K515, K516, K513, K517, K518, K519 \ -) { \ - { K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K117, K118, K119 }, \ - { K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, K217, ____, K219 }, \ - { K301, K302, K303, ____, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, K317, K318, K319 }, \ - { K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, K415, K416, K417, K418, K419 }, \ - { K501, ____, K503, ____, K505, K506, K507, ____, ____, K510, ____, ____, K513, ____, K515, K516, K517, K518, K519 } \ -} diff --git a/keyboards/switchplate/southpaw_fullsize/config.h b/keyboards/switchplate/southpaw_fullsize/config.h deleted file mode 100644 index 7b159eb5d6..0000000000 --- a/keyboards/switchplate/southpaw_fullsize/config.h +++ /dev/null @@ -1,75 +0,0 @@ -/* -Copyright 2020 Ryota Goto - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 22 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define MATRIX_ROW_PINS { E1, C0, C1, C2, C3, C4 } -#define MATRIX_COL_PINS { A7, C7, C6, C5, F0, F1, F2, F3, F4, F5, F6, F7, A0, A1, A2, A3, A4, A5, A6, E0, D7, D6 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -#define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -#define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/switchplate/southpaw_fullsize/info.json b/keyboards/switchplate/southpaw_fullsize/info.json deleted file mode 100644 index c90954ead7..0000000000 --- a/keyboards/switchplate/southpaw_fullsize/info.json +++ /dev/null @@ -1,246 +0,0 @@ -{ - "keyboard_name": "Southpaw Fullsize", - "manufacturer": "Switchplate Peripherals", - "url": "", - "maintainer": "ai03", - "usb": { - "vid": "0xA103", - "pid": "0x0017", - "device_version": "0.0.1" - }, - "layouts": { - "LAYOUT_all": { - "layout": [ - {"x":0, "y":0}, - {"x":1, "y":0}, - {"x":2, "y":0}, - {"x":4.25, "y":0}, - {"x":6.25, "y":0}, - {"x":7.25, "y":0}, - {"x":8.25, "y":0}, - {"x":9.25, "y":0}, - {"x":10.75, "y":0}, - {"x":11.75, "y":0}, - {"x":12.75, "y":0}, - {"x":13.75, "y":0}, - {"x":15.25, "y":0}, - {"x":16.25, "y":0}, - {"x":17.25, "y":0}, - {"x":18.25, "y":0}, - {"x":19.5, "y":0}, - {"x":20.5, "y":0}, - {"x":21.5, "y":0}, - {"x":0, "y":1.25}, - {"x":1, "y":1.25}, - {"x":2, "y":1.25}, - {"x":3, "y":1.25}, - {"x":4.25, "y":1.25}, - {"x":5.25, "y":1.25}, - {"x":6.25, "y":1.25}, - {"x":7.25, "y":1.25}, - {"x":8.25, "y":1.25}, - {"x":9.25, "y":1.25}, - {"x":10.25, "y":1.25}, - {"x":11.25, "y":1.25}, - {"x":12.25, "y":1.25}, - {"x":13.25, "y":1.25}, - {"x":14.25, "y":1.25}, - {"x":15.25, "y":1.25}, - {"x":16.25, "y":1.25}, - {"x":17.25, "y":1.25}, - {"x":18.25, "y":1.25}, - {"x":19.5, "y":1.25}, - {"x":20.5, "y":1.25}, - {"x":21.5, "y":1.25}, - {"x":0, "y":2.25}, - {"x":1, "y":2.25}, - {"x":2, "y":2.25}, - {"x":3, "y":2.25}, - {"x":4.25, "y":2.25, "w":1.5}, - {"x":5.75, "y":2.25}, - {"x":6.75, "y":2.25}, - {"x":7.75, "y":2.25}, - {"x":8.75, "y":2.25}, - {"x":9.75, "y":2.25}, - {"x":10.75, "y":2.2 |