diff options
Diffstat (limited to 'keyboards/switchplate/southpaw_65/dev.md')
| -rw-r--r-- | keyboards/switchplate/southpaw_65/dev.md | 141 |
1 files changed, 0 insertions, 141 deletions
diff --git a/keyboards/switchplate/southpaw_65/dev.md b/keyboards/switchplate/southpaw_65/dev.md deleted file mode 100644 index 08a333f2d3..0000000000 --- a/keyboards/switchplate/southpaw_65/dev.md +++ /dev/null @@ -1,141 +0,0 @@ -# Southpaw Extended 65% - -Development docs covering the following: -- Kimera core -- RGB -- Backlight - -## Kimera core - - -What little available info that was available for the qmk port -- atmega32u4 16Mhz -- board seems to have a 6Mhz crystal -- 2x PCA9555 I2C IO expander - -Links: -- [Schematic, BOM, Gerbers](/kairyu/kimera/blob/master/kimera_core) -- [Original firmware](https://github.com/kairyu/tmk_keyboard_custom/tree/master/keyboard/kimera) - -```c -/* -Kimera_core_v1.0 Components - - U1 (atmega32u4) - ,----------------. - TX --| TX0(PD3) RAW |-- - RX --| RX1(PD2) GND |-- - --| GND RESET |-- RST - --| GND VCC |-- - SDA --| 2(PD1) (PF4)A3 |-- - SCL --| 3(PD0) (PF5)A2 |-- - (INT) --| 4(PD4) (PF6)A1 |-- - --| 5(PC6) (PF7)A0 |-- - --| 6(PD7) (PB1)15 |-- SCK - LED2 --| 7(PE6) (PB3)14 |-- MISO - LED1 --| 8(PB4) (PB2)16 |-- MOSI - LED3 --| 9(PB5) (PB6)10 |-- LED4 - `----------------' - - IC1 (PCA9555) IC2 (PCA9555) - ,----------. ,----------. - SDA --| SDA P00 |-- P1 SDA --| SDA P00 |-- P17 - SCL --| SCL P01 |-- P2 SCL --| SCL P01 |-- P18 - INT --| INT P02 |-- P3 INT --| INT P02 |-- P19 - | P03 |-- P4 | P03 |-- P20 - GND --| A0 P04 |-- P5 VCC --| A0 P04 |-- P21 - SJ1 --| A1 P05 |-- P6 SJ1 --| A1 P05 |-- P22 - SJ2 --| A2 P06 |-- P7 SJ2 --| A2 P06 |-- P23 - | P07 |-- P8 | P07 |-- P24 - | | | | - | P10 |-- P9 | P10 |-- P25 - | P11 |-- P10 | P11 |-- P26 - | P12 |-- P11 | P12 |-- P27 - | P13 |-- P12 | P13 |-- P28 - | P14 |-- P13 | P14 |-- P29 - | P15 |-- P14 | P15 |-- P30 - | P16 |-- P15 | P16 |-- P31 - | P17 |-- P16 | P17 |-- P32 - `----------' `----------' -*/ - -``` - -### Bootloader -Default bootloader is `atmel-dfu`. -Reboot to bootloader via magnetic switch next to icsp header. -Flash using regular dfu methods. - -### Southpaw Extended 65 pin mappings -Taken from [kimera-config.json](https://github.com/kairyu/tkg/blob/master/keyboard/config/kimera-config.json) - - "row_mapping": [ 2, 3, 4, 5, 6 ], - "col_mapping": [ 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31 ], - -# RGB -- PIN C7 -- Number of RGB LED 7 - -# Backlight -- PIN B5 - -# Capslock -- PIN B6 - -# Numlock -- PIN C6 - -## Assumptions -### Pin/Port mappings -- All cols are on the same IC -- All rows are on the same IC and port -- Pins mapped sequentially -- Each port only does row or column not a mixture of both - - No need to have complex port config - - - -| ROW index | Kimera Pin | PCA9555 | -| ----------|------------|-------------------| -| 0 | 2 | IC1 Port 0 pin 1 | -| 1 | 3 | IC1 Port 0 pin 2 | -| 2 | 4 | IC1 Port 0 pin 3 | -| 3 | 5 | IC1 Port 0 pin 4 | -| 4 | 6 | IC1 Port 0 pin 5 | - -- Safe enough to assume `row_index == pin` - - -| COL index | Kimera Pin | PCA9555 | -| ----------|------------|-------------------| -| 0 | 13 | IC1 Port 1 pin 4 | -| 1 | 14 | IC1 Port 1 pin 5 | -| 2 | 15 | IC1 Port 1 pin 6 | -| 3 | 16 | IC1 Port 1 pin 7 | -| 4 | 17 | IC2 Port 0 pin 0 | -| 5 | 18 | IC2 Port 0 pin 1 | -| 6 | 19 | IC2 Port 0 pin 2 | -| 7 | 20 | IC2 Port 0 pin 3 | -| 8 | 21 | IC2 Port 0 pin 4 | -| 9 | 22 | IC2 Port 0 pin 5 | -| 10 | 23 | IC2 Port 0 pin 6 | -| 11 | 24 | IC2 Port 0 pin 7 | -| 12 | 25 | IC2 Port 1 pin 0 | -| 13 | 26 | IC2 Port 1 pin 1 | -| 14 | 27 | IC2 Port 1 pin 2 | -| 15 | 28 | IC2 Port 1 pin 3 | -| 16 | 29 | IC2 Port 1 pin 4 | -| 17 | 30 | IC2 Port 1 pin 5 | -| 18 | 31 | IC2 Port 1 pin 6 | - -- Need to read both ICs and corresponding port to compile the correct column data -- All pins are mapped sequentially -- maps to the usual practice of reading matrix columns -- Needs uint32_t to read 19 columns of data - -## Notes -[pca9555 datasheet](https://www.ti.com/lit/ds/symlink/pca9555.pdf) - -- Other Kimera based boards with non sequential pin mappings, pins mapped across ICs, or mixed row/col configs will need more complicated `pin -> i2c_addr,port,pin` logic as well as rather more complex pin functions. - -## Return to stock firmware -To return back to stock TMK firmware, use [programming guide provided by Reconsiderit](https://geekhack.org/index.php?topic=92344.msg2625784#msg2625784) |