3 files changed, 2 insertions, 52 deletions
diff --git a/keyboards/stello65/beta/config.h b/keyboards/stello65/beta/config.h
index 28b8bd1ed6..bc4be7644a 100644
--- a/keyboards/stello65/beta/config.h
+++ b/keyboards/stello65/beta/config.h
@@ -3,7 +3,6 @@
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 10
@@ -37,21 +36,12 @@
 
 #define LED_CAPS_LOCK_PIN B3
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
-
 //#define LED_NUM_LOCK_PIN B0
 //#define LED_CAPS_LOCK_PIN B1
 //#define LED_SCROLL_LOCK_PIN B2
 //#define LED_COMPOSE_PIN B3
 //#define LED_KANA_PIN B4
 
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
 //#define RGB_DI_PIN E2
 //#ifdef RGB_DI_PIN
 //#    define RGBLED_NUM 16
@@ -68,43 +58,11 @@
 //#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 //#endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -120,7 +78,3 @@
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/stello65/beta/info.json b/keyboards/stello65/beta/info.json
index 3beb747bec..364298d485 100644
--- a/keyboards/stello65/beta/info.json
+++ b/keyboards/stello65/beta/info.json
@@ -8,6 +8,8 @@
         "pid": "0x0003",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT_all": {
             "layout": [{"label":"esc", "x":0, "y":0}, {"label":"1", "x":1, "y":0}, {"label":"2", "x":2, "y":0}, {"label":"3", "x":3, "y":0}, {"label":"4", "x":4, "y":0}, {"label":"5", "x":5, "y":0}, {"label":"6", "x":6, "y":0}, {"label":"7", "x":7, "y":0}, {"label":"8", "x":8, "y":0}, {"label":"9", "x":9, "y":0}, {"label":"0", "x":10, "y":0}, {"label":"-", "x":11, "y":0}, {"label":"=", "x":12, "y":0}, {"label":"bs", "x":13, "y":0}, {"label":"del", "x":14, "y":0}, {"label":"home", "x":15, "y":0}, {"label":"vold", "x":16.25, "y":0}, {"label":"volu", "x":17.25, "y":0}, {"label":"tab", "x":0, "y":1, "w":1.5}, {"label":"q", "x":1.5, "y":1}, {"label":"w", "x":2.5, "y":1}, {"label":"e", "x":3.5, "y":1}, {"label":"r", "x":4.5, "y":1}, {"label":"t", "x":5.5, "y":1}, {"label":"y", "x":6.5, "y":1}, {"label":"u", "x":7.5, "y":1}, {"label":"i", "x":8.5, "y":1}, {"label":"o", "x":9.5, "y":1}, {"label":"p", "x":10.5, "y":1}, {"label":"[", "x":11.5, "y":1}, {"label":"]", "x":12.5, "y":1}, {"label":"\\", "x":13.5, "y":1, "w":1.5}, {"label":"end", "x":15, "y":1}, {"label":"caps", "x":0, "y":2, "w":1.75}, {"label":"a", "x":1.75, "y":2}, {"label":"s", "x":2.75, "y":2}, {"label":"d", "x":3.75, "y":2}, {"label":"f", "x":4.75, "y":2}, {"label":"g", "x":5.75, "y":2}, {"label":"h", "x":6.75, "y":2}, {"label":"j", "x":7.75, "y":2}, {"label":"k", "x":8.75, "y":2}, {"label":"l", "x":9.75, "y":2}, {"label":";", "x":10.75, "y":2}, {"label":"'", "x":11.75, "y":2}, {"label":"enter", "x":12.75, "y":2, "w":2.25}, {"label":"pgup", "x":15, "y":2}, {"label":"shift", "x":0, "y":3, "w":1.25}, {"label":"\\", "x":1.25, "y":3}, {"label":"z", "x":2.25, "y":3}, {"label":"x", "x":3.25, "y":3}, {"label":"c", "x":4.25, "y":3}, {"label":"v", "x":5.25, "y":3}, {"label":"b", "x":6.25, "y":3}, {"label":"n", "x":7.25, "y":3}, {"label":"m", "x":8.25, "y":3}, {"label":",", "x":9.25, "y":3}, {"label":".", "x":10.25, "y":3}, {"label":"/", "x":11.25, "y":3}, {"label":"shift", "x":12.25, "y":3, "w":1.75}, {"label":"up", "x":14, "y":3}, {"label":"pgdn", "x":15, "y":3}, {"label":"ctrl", "x":0, "y":4, "w":1.25}, {"label":"gui", "x":1.25, "y":4, "w":1.25}, {"label":"alt", "x":2.5, "y":4, "w":1.25}, {"label":"spacce", "x":3.75, "y":4, "w":6.25}, {"label":"alt", "x":10, "y":4, "w":1.25}, {"label":"ctrl", "x":11.25, "y":4, "w":1.25}, {"label":"left", "x":13, "y":4}, {"label":"down", "x":14, "y":4}, {"label":"right", "x":15, "y":4}]
diff --git a/keyboards/stello65/beta/rules.mk b/keyboards/stello65/beta/rules.mk
index 9754b6df42..689c1e977e 100644
--- a/keyboards/stello65/beta/rules.mk
+++ b/keyboards/stello65/beta/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #