diff options
Diffstat (limited to 'keyboards/smallkeyboard/config.h')
| -rw-r--r-- | keyboards/smallkeyboard/config.h | 104 |
1 files changed, 104 insertions, 0 deletions
diff --git a/keyboards/smallkeyboard/config.h b/keyboards/smallkeyboard/config.h new file mode 100644 index 0000000000..689d53d54e --- /dev/null +++ b/keyboards/smallkeyboard/config.h @@ -0,0 +1,104 @@ +/* Copyright 2021 zhouqiong19840119 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + +#pragma once + +/* USB Device descriptor parameter */ +#include "config_common.h" +#define VENDOR_ID 0x7A71 // "zq" = zhouqiong19840119 +#define PRODUCT_ID 0x736B // "sk" = smallkeyboard +#define DEVICE_VER 0x0001 +#define MANUFACTURER zhouqiong19840119 +#define PRODUCT smallkeyboard + +/* key matrix size */ +#define MATRIX_ROWS 2 +#define MATRIX_COLS 3 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS {C7, C6 } +#define MATRIX_COL_PINS {F7, F6, F5} +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION ROW2COL + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 3 + +/* disable these deprecated features by default */ +//#ifndef LINK_TIME_OPTIMIZATION_ENABLE +//# define NO_ACTION_MACRO +//# define NO_ACTION_FUNCTION +//#endif + +#ifdef RGB_MATRIX_ENABLE +# define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +# define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended +# define RGB_MATRIX_KEYPRESSES +# define RGB_MATRIX_FRAMEBUFFER_EFFECTS +# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define DISABLE_RGB_MATRIX_BAND_SAT +# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define DISABLE_RGB_MATRIX_SPLASH +# define DISABLE_RGB_MATRIX_MULTISPLASH +# define DISABLE_RGB_MATRIX_SOLID_SPLASH +# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +# define DISABLE_RGB_MATRIX_DIGITAL_RAIN + +// This is a 7-bit address, that gets left-shifted and bit 0 +// set to 0 for write, 1 for read (as per I2C protocol) +// The address will vary depending on your wiring: +// 0b1110100 AD <-> GND +// 0b1110111 AD <-> VCC +// 0b1110101 AD <-> SCL +// 0b1110110 AD <-> SDA +#define DRIVER_ADDR_1 0b1110100 +//#define DRIVER_ADDR_2 0b1110110 + +#define DRIVER_COUNT 1 +#define DRIVER_1_LED_TOTAL 6 +//#define DRIVER_1_LED_TOTAL 25 +//#define DRIVER_2_LED_TOTAL 24 +//#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL +#endif +//#define RGB_DI_PIN B7 +//#ifdef RGB_DI_PIN +//#define RGBLIGHT_ANIMATIONS +//#define RGBLED_NUM 8 +//#define RGBLIGHT_HUE_STEP 5 +//#define RGBLIGHT_SAT_STEP 5 +//#define RGBLIGHT_VAL_STEP 5 +//#define RGBLIGHT_SLEEP +//#endif |