summaryrefslogtreecommitdiffstats
path: root/keyboards/satt/comet46
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/satt/comet46')
-rw-r--r--keyboards/satt/comet46/i2c.c162
-rw-r--r--keyboards/satt/comet46/i2c.h46
-rw-r--r--keyboards/satt/comet46/keymaps/default/config.h29
-rw-r--r--keyboards/satt/comet46/keymaps/default/keymap.c45
-rw-r--r--keyboards/satt/comet46/keymaps/default/rules.mk5
-rw-r--r--keyboards/satt/comet46/keymaps/satt/config.h29
-rw-r--r--keyboards/satt/comet46/keymaps/satt/keymap.c105
-rw-r--r--keyboards/satt/comet46/keymaps/satt/rules.mk4
-rw-r--r--keyboards/satt/comet46/lib/glcdfont.c137
-rw-r--r--keyboards/satt/comet46/rules.mk5
-rw-r--r--keyboards/satt/comet46/ssd1306.c343
-rw-r--r--keyboards/satt/comet46/ssd1306.h90
12 files changed, 54 insertions, 946 deletions
diff --git a/keyboards/satt/comet46/i2c.c b/keyboards/satt/comet46/i2c.c
deleted file mode 100644
index 4bee5c6398..0000000000
--- a/keyboards/satt/comet46/i2c.c
+++ /dev/null
@@ -1,162 +0,0 @@
-#include <util/twi.h>
-#include <avr/io.h>
-#include <stdlib.h>
-#include <avr/interrupt.h>
-#include <util/twi.h>
-#include <stdbool.h>
-#include "i2c.h"
-
-#ifdef USE_I2C
-
-// Limits the amount of we wait for any one i2c transaction.
-// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
-// 9 bits, a single transaction will take around 90μs to complete.
-//
-// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit
-// poll loop takes at least 8 clock cycles to execute
-#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
-
-#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
-
-volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
-
-static volatile uint8_t slave_buffer_pos;
-static volatile bool slave_has_register_set = false;
-
-// Wait for an i2c operation to finish
-inline static
-void i2c_delay(void) {
- uint16_t lim = 0;
- while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
- lim++;
-
- // easier way, but will wait slightly longer
- // _delay_us(100);
-}
-
-// Setup twi to run at 100kHz or 400kHz (see ./i2c.h SCL_CLOCK)
-void i2c_master_init(void) {
- // no prescaler
- TWSR = 0;
- // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
- // Check datasheets for more info.
- TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
-}
-
-// Start a transaction with the given i2c slave address. The direction of the
-// transfer is set with I2C_READ and I2C_WRITE.
-// returns: 0 => success
-// 1 => error
-uint8_t i2c_master_start(uint8_t address) {
- TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
-
- i2c_delay();
-
- // check that we started successfully
- if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
- return 1;
-
- TWDR = address;
- TWCR = (1<<TWINT) | (1<<TWEN);
-
- i2c_delay();
-
- if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
- return 1; // slave did not acknowledge
- else
- return 0; // success
-}
-
-
-// Finish the i2c transaction.
-void i2c_master_stop(void) {
- TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-
- uint16_t lim = 0;
- while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
- lim++;
-}
-
-// Write one byte to the i2c slave.
-// returns 0 => slave ACK
-// 1 => slave NACK
-uint8_t i2c_master_write(uint8_t data) {
- TWDR = data;
- TWCR = (1<<TWINT) | (1<<TWEN);
-
- i2c_delay();
-
- // check if the slave acknowledged us
- return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
-}
-
-// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
-// if ack=0 the acknowledge bit is not set.
-// returns: byte read from i2c device
-uint8_t i2c_master_read(int ack) {
- TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
-
- i2c_delay();
- return TWDR;
-}
-
-void i2c_reset_state(void) {
- TWCR = 0;
-}
-
-void i2c_slave_init(uint8_t address) {
- TWAR = address << 0; // slave i2c address
- // TWEN - twi enable
- // TWEA - enable address acknowledgement
- // TWINT - twi interrupt flag
- // TWIE - enable the twi interrupt
- TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
-}
-
-ISR(TWI_vect);
-
-ISR(TWI_vect) {
- uint8_t ack = 1;
- switch(TW_STATUS) {
- case TW_SR_SLA_ACK:
- // this device has been addressed as a slave receiver
- slave_has_register_set = false;
- break;
-
- case TW_SR_DATA_ACK:
- // this device has received data as a slave receiver
- // The first byte that we receive in this transaction sets the location
- // of the read/write location of the slaves memory that it exposes over
- // i2c. After that, bytes will be written at slave_buffer_pos, incrementing
- // slave_buffer_pos after each write.
- if(!slave_has_register_set) {
- slave_buffer_pos = TWDR;
- // don't acknowledge the master if this memory loctaion is out of bounds
- if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
- ack = 0;
- slave_buffer_pos = 0;
- }
- slave_has_register_set = true;
- } else {
- i2c_slave_buffer[slave_buffer_pos] = TWDR;
- BUFFER_POS_INC();
- }
- break;
-
- case TW_ST_SLA_ACK:
- case TW_ST_DATA_ACK:
- // master has addressed this device as a slave transmitter and is
- // requesting data.
- TWDR = i2c_slave_buffer[slave_buffer_pos];
- BUFFER_POS_INC();
- break;
-
- case TW_BUS_ERROR: // something went wrong, reset twi state
- TWCR = 0;
- default:
- break;
- }
- // Reset everything, so we are ready for the next TWI interrupt
- TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
-}
-#endif
diff --git a/keyboards/satt/comet46/i2c.h b/keyboards/satt/comet46/i2c.h
deleted file mode 100644
index 710662c7ab..0000000000
--- a/keyboards/satt/comet46/i2c.h
+++ /dev/null
@@ -1,46 +0,0 @@
-#pragma once
-
-#include <stdint.h>
-
-#ifndef F_CPU
-#define F_CPU 16000000UL
-#endif
-
-#define I2C_READ 1
-#define I2C_WRITE 0
-
-#define I2C_ACK 1
-#define I2C_NACK 0
-
-#define SLAVE_BUFFER_SIZE 0x10
-
-// i2c SCL clock frequency 400kHz
-#define SCL_CLOCK 400000L
-
-extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
-
-void i2c_master_init(void);
-uint8_t i2c_master_start(uint8_t address);
-void i2c_master_stop(void);
-uint8_t i2c_master_write(uint8_t data);
-uint8_t i2c_master_read(int);
-void i2c_reset_state(void);
-void i2c_slave_init(uint8_t address);
-
-
-static inline unsigned char i2c_start_read(unsigned char addr) {
- return i2c_master_start((addr << 1) | I2C_READ);
-}
-
-static inline unsigned char i2c_start_write(unsigned char addr) {
- return i2c_master_start((addr << 1) | I2C_WRITE);
-}
-
-// from SSD1306 scrips
-extern unsigned char i2c_rep_start(unsigned char addr);
-extern void i2c_start_wait(unsigned char addr);
-extern unsigned char i2c_readAck(void);
-extern unsigned char i2c_readNak(void);
-extern unsigned char i2c_read(unsigned char ack);
-
-#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak();
diff --git a/keyboards/satt/comet46/keymaps/default/config.h b/keyboards/satt/comet46/keymaps/default/config.h
deleted file mode 100644
index ee02a94b7e..0000000000
--- a/keyboards/satt/comet46/keymaps/default/config.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
-This is the c configuration file for the keymap
-
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-// place overrides here
-
-
-/* Use I2C or Serial */
-
-#define USE_I2C
-#define SSD1306OLED
diff --git a/keyboards/satt/comet46/keymaps/default/keymap.c b/keyboards/satt/comet46/keymaps/default/keymap.c
index bccca0a091..3e6f9045ff 100644
--- a/keyboards/satt/comet46/keymaps/default/keymap.c
+++ b/keyboards/satt/comet46/keymaps/default/keymap.c
@@ -2,9 +2,6 @@
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
#include QMK_KEYBOARD_H
-#ifdef SSD1306OLED
- #include "ssd1306.h"
-#endif
// Each layer gets a name for readability, which is then used in the keymap matrix below.
@@ -148,8 +145,7 @@ layer_state_t layer_state_set_user(layer_state_t state) {
return update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST);
}
-//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
-#ifdef SSD1306OLED
+#ifdef OLED_ENABLE
// You need to add source files to SRC in rules.mk when using OLED display functions
void set_keylog(uint16_t keycode);
@@ -157,25 +153,10 @@ const char *read_keylog(void);
const char *read_modifier_state(void);
const char *read_host_led_state(void);
-void matrix_init_user(void) {
- iota_gfx_init(false); // turns on the display
-}
-
-void matrix_scan_user(void) {
- iota_gfx_task(); // this is what updates the display continuously
-}
-
-void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
- if (memcmp(dest->display, source->display, sizeof(dest->display))) {
- memcpy(dest->display, source->display, sizeof(dest->display));
- dest->dirty = true;
- }
-}
-
-void render_status(struct CharacterMatrix *matrix) {
+bool oled_task_user(void) {
// Layer state
char layer_str[22];
- matrix_write(matrix, "Layer: ");
+ oled_write_P(PSTR("Layer: "), false);
uint8_t layer = get_highest_layer(layer_state);
uint8_t default_layer = get_highest_layer(eeconfig_read_default_layer());
switch (layer) {
@@ -207,27 +188,21 @@ void render_status(struct CharacterMatrix *matrix) {
default:
snprintf(layer_str, sizeof(layer_str), "Undef-%d", layer);
}
- matrix_write_ln(matrix, layer_str);
+ oled_write_ln(layer_str, false);
// Last entered keycode
- matrix_write_ln(matrix, read_keylog());
+ oled_write_ln(read_keylog(), false);
// Modifier state
- matrix_write_ln(matrix, read_modifier_state());
+ oled_write_ln(read_modifier_state(), false);
// Host Keyboard LED Status
- matrix_write(matrix, read_host_led_state());
-}
+ oled_write(read_host_led_state(), false);
-
-void iota_gfx_task_user(void) {
- struct CharacterMatrix matrix;
- matrix_clear(&matrix);
- render_status(&matrix);
- matrix_update(&display, &matrix);
+ return false;
}
-#endif//SSD1306OLED
+#endif
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- #ifdef SSD1306OLED
+ #ifdef OLED_ENABLE
if (record->event.pressed) {
set_keylog(keycode);
}
diff --git a/keyboards/satt/comet46/keymaps/default/rules.mk b/keyboards/satt/comet46/keymaps/default/rules.mk
index 3fa01f96af..3ceffe90ec 100644
--- a/keyboards/satt/comet46/keymaps/default/rules.mk
+++ b/keyboards/satt/comet46/keymaps/default/rules.mk
@@ -1,5 +1,6 @@
# If you want to change display settings of the OLED, you need to change the following lines
-SRC += ./lib/glcdfont.c \
- ./lib/keylogger.c \
+SRC += ./lib/keylogger.c \
./lib/modifier_state_reader.c \
./lib/host_led_state_reader.c
+
+OLED_ENABLE = yes
diff --git a/keyboards/satt/comet46/keymaps/satt/config.h b/keyboards/satt/comet46/keymaps/satt/config.h
deleted file mode 100644
index a3ca2ebfef..0000000000
--- a/keyboards/satt/comet46/keymaps/satt/config.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
-This is the c configuration file for the keymap
-
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-/* Use I2C or Serial */
-
-#define USE_I2C
-#define SSD1306OLED
-
-#endif
diff --git a/keyboards/satt/comet46/keymaps/satt/keymap.c b/keyboards/satt/comet46/keymaps/satt/keymap.c
index 54d1d791d7..505b7eaf0a 100644
--- a/keyboards/satt/comet46/keymaps/satt/keymap.c
+++ b/keyboards/satt/comet46/keymaps/satt/keymap.c
@@ -5,9 +5,6 @@
#include "keymap_jis2us.h"
#include "action_pseudo_lut.h"
#include "keymap_japanese.h"
-#ifdef SSD1306OLED
- #include "ssd1306.h"
-#endif
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
@@ -176,8 +173,7 @@ layer_state_t layer_state_set_user(layer_state_t state) {
}
}
-//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
-#ifdef SSD1306OLED
+#ifdef OLED_ENABLE
// You need to add source files to SRC in rules.mk when using OLED display functions
void set_keylog(uint16_t keycode);
@@ -185,86 +181,59 @@ const char *read_keylog(void);
const char *read_modifier_state(void);
const char *read_host_led_state(void);
-void matrix_init_user(void) {
- iota_gfx_init(false); // turns on the display
-}
-
-void matrix_scan_user(void) {
- iota_gfx_task(); // this is what updates the display continuously
-}
-
-void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
- if (memcmp(dest->display, source->display, sizeof(dest->display))) {
- memcpy(dest->display, source->display, sizeof(dest->display));
- dest->dirty = true;
- }
-}
-
-void render_status(struct CharacterMatrix *matrix) {
+bool oled_task_user(void) {
// Layer state
char layer_str[22];
- matrix_write(matrix, "Layer: ");
+ oled_write_P(PSTR("Layer: "), false);
uint8_t layer = get_highest_layer(layer_state);
- uint8_t default_layer = biton32(eeconfig_read_default_layer());
- switch (layer) {
- case _QWERTY:
- switch (default_layer) {
- case _QWERTY:
- snprintf(layer_str, sizeof(layer_str), "Qwerty");
- break;
- case _PSEUDO_US:
- snprintf(layer_str, sizeof(layer_str), "Psuedo_US");
- break;
- default:
- snprintf(layer_str, sizeof(layer_str), "Undef-%d", default_layer);
- break;
- }
- break;
- case _RAISE:
- snprintf(layer_str, sizeof(layer_str), "Raise");
- break;
- case _LOWER:
- snprintf(layer_str, sizeof(layer_str), "Lower");
- break;
+ uint8_t default_layer = get_highest_layer(eeconfig_read_default_layer());
+ switch (layer) {
+ case _QWERTY:
+ switch (default_layer) {
+ case _QWERTY:
+ snprintf(layer_str, sizeof(layer_str), "Qwerty");
+ break;
+ case _PSEUDO_US:
+ snprintf(layer_str, sizeof(layer_str), "Psuedo_US");
+ break;
+ default:
+ snprintf(layer_str, sizeof(layer_str), "Undef-%d", default_layer);
+ break;
+ }
+ break;
+ case _RAISE:
+ snprintf(layer_str, sizeof(layer_str), "Raise");
+ break;
+ case _LOWER:
+ snprintf(layer_str, sizeof(layer_str), "Lower");
+ break;
case _PSEUDO_US_RAISE:
snprintf(layer_str, sizeof(layer_str), "P_US_Raise");
break;
case _PSEUDO_US_LOWER:
snprintf(layer_str, sizeof(layer_str), "P_US_Lower");
break;
- case _ADJUST:
- snprintf(layer_str, sizeof(layer_str), "Adjust");
- break;
- default:
- snprintf(layer_str, sizeof(layer_str), "Undef-%d", layer);
- }
- matrix_write_ln(matrix, layer_str);
+ case _ADJUST:
+ snprintf(layer_str, sizeof(layer_str), "Adjust");
+ break;
+ default:
+ snprintf(layer_str, sizeof(layer_str), "Undef-%d", layer);
+ }
+ oled_write_ln(layer_str, false);
// Last entered keycode
- matrix_write_ln(matrix, read_keylog());
+ oled_write_ln(read_keylog(), false);
// Modifier state
- matrix_write_ln(matrix, read_modifier_state());
+ oled_write_ln(read_modifier_state(), false);
// Host Keyboard LED Status
- matrix_write(matrix, read_host_led_state());
-}
-
-void iota_gfx_task_user(void) {
- struct CharacterMatrix matrix;
-
-#if DEBUG_TO_SCREEN
- if (debug_enable) {
- return;
- }
-#endif
+ oled_write(read_host_led_state(), false);
- matrix_clear(&matrix);
- render_status(&matrix);
- matrix_update(&display, &matrix);
+ return false;
}
-#endif//SSD1306OLED
+#endif
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- #ifdef SSD1306OLED
+ #ifdef OLED_ENABLE
if (record->event.pressed) {
set_keylog(keycode);
}
diff --git a/keyboards/satt/comet46/keymaps/satt/rules.mk b/keyboards/satt/comet46/keymaps/satt/rules.mk
index 91609dd4fd..9c07b12fcb 100644
--- a/keyboards/satt/comet46/keymaps/satt/rules.mk
+++ b/keyboards/satt/comet46/keymaps/satt/rules.mk
@@ -1,8 +1,8 @@
SRC += action_pseudo_lut.c
# If you want to change display settings of the OLED, you need to change the following lines
-SRC += ./lib/glcdfont.c \
- ./lib/keylogger.c \
+SRC += ./lib/keylogger.c \
./lib/modifier_state_reader.c \
./lib/host_led_state_reader.c
+OLED_ENABLE = yes
diff --git a/keyboards/satt/comet46/lib/glcdfont.c b/keyboards/satt/comet46/lib/glcdfont.c
deleted file mode 100644
index 361d0c3dc6..0000000000
--- a/keyboards/satt/comet46/lib/glcdfont.c
+++ /dev/null
@@ -1,137 +0,0 @@
-// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0.
-// See gfxfont.h for newer custom bitmap font info.
-
-#include "progmem.h"
-
-// Standard ASCII 5x7 font
-
-const unsigned char font[] PROGMEM = {
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
- 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00,
- 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00,
- 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00,
- 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00,
- 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00,
- 0x00, 0x18, 0x3C, 0x18, 0x00, 0x00,
- 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00,
- 0x00, 0x18, 0x24, 0x18, 0x00, 0x00,
- 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00,
- 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00,
- 0x26, 0x29, 0x79, 0x29, 0x26, 0x00,
- 0x40, 0x7F, 0x05, 0x05, 0x07, 0x00,
- 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00,
- 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00,
- 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00,
- 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00,
- 0x14, 0x22, 0x7F, 0x22, 0x14, 0x00,
- 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00,
- 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00,
- 0x00, 0x66, 0x89, 0x95, 0x6A, 0x00,
- 0x60, 0x60, 0x60, 0x60, 0x60, 0x00,
- 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00,
- 0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
- 0x10, 0x20, 0x7E, 0x20, 0x10, 0x00,
- 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00,
- 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00,
- 0x1E, 0x10, 0x10, 0x10, 0x10, 0x00,
- 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00,
- 0x30, 0x38, 0x3E, 0x38, 0x30, 0x00,
- 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00,
- 0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
- 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00,
- 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00,
- 0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
- 0x36, 0x49, 0x56, 0x20, 0x50, 0x00,
- 0x00, 0x08, 0x07, 0x03, 0x00, 0x00,
- 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00,
- 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00,
- 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00,
- 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00,
- 0x00, 0x80, 0x70, 0x30, 0x00, 0x00,
- 0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
- 0x00, 0x00, 0x60, 0x60, 0x00, 0x00,
- 0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
- 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00,
- 0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
- 0x72, 0x49, 0x49, 0x49, 0x46, 0x00,
- 0x21, 0x41, 0x49, 0x4D, 0x33, 0x00,
- 0x18, 0x14, 0x12, 0x7F, 0x10, 0x00,
- 0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
- 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00,
- 0x41, 0x21, 0x11, 0x09, 0x07, 0x00,
- 0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
- 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00,
- 0x00, 0x00, 0x14, 0x00, 0x00, 0x00,
- 0x00, 0x40, 0x34, 0x00, 0x00, 0x00,
- 0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
- 0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
- 0x00, 0x41, 0x22, 0x14, 0x08, 0x00,
- 0x02, 0x01, 0x59, 0x09, 0x06, 0x00,
- 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00,
- 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00,
- 0x7F, 0x49, 0x49, 0x49, 0x36, 0x00,
- 0x3E, 0x41, 0x41, 0x41, 0x22, 0x00,
- 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00,
- 0x7F, 0x49, 0x49, 0x49, 0x41, 0x00,
- 0x7F, 0x09, 0x09, 0x09, 0x01, 0x00,
- 0x3E, 0x41, 0x41, 0x51, 0x73, 0x00,
- 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00,
- 0x00, 0x41, 0x7F, 0x41, 0x00, 0x00,
- 0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
- 0x7F, 0x08, 0x14, 0x22, 0x41, 0x00,
- 0x7F, 0x40, 0x40, 0x40, 0x40, 0x00,
- 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00,
- 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00,
- 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00,
- 0x7F, 0x09, 0x09, 0x09, 0x06, 0x00,
- 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00,
- 0x7F, 0x09, 0x19, 0x29, 0x46, 0x00,
- 0x26, 0x49, 0x49, 0x49, 0x32, 0x00,
- 0x03, 0x01, 0x7F, 0x01, 0x03, 0x00,
- 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00,
- 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00,
- 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00,
- 0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
- 0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
- 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00,
- 0x00, 0x7F, 0x41, 0x41, 0x41, 0x00,
- 0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
- 0x00, 0x41, 0x41, 0x41, 0x7F, 0x00,
- 0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
- 0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
- 0x00, 0x03, 0x07, 0x08, 0x00, 0x00,
- 0x20, 0x54, 0x54, 0x78, 0x40, 0x00,
- 0x7F, 0x28, 0x44, 0x44, 0x38, 0x00,
- 0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
- 0x38, 0x44, 0x44, 0x28, 0x7F, 0x00,
- 0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
- 0x00, 0x08, 0x7E, 0x09, 0x02, 0x00,
- 0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x00,
- 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00,
- 0x00, 0x44, 0x7D, 0x40, 0x00, 0x00,
- 0x20, 0x40, 0x40, 0x3D, 0x00, 0x00,
- 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00,
- 0x00, 0x41, 0x7F, 0x40, 0x00, 0x00,
- 0x7C, 0x04, 0x78, 0x04, 0x78, 0x00,
- 0x7C, 0x08, 0x04, 0x04, 0x78, 0x00,
- 0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
- 0xFC, 0x18, 0x24, 0x24, 0x18, 0x00,
- 0x18, 0x24, 0x24, 0x18, 0xFC, 0x00,
- 0x7C, 0x08, 0x04, 0x04, 0x08, 0x00,
- 0x48, 0x54, 0x54, 0x54, 0x24, 0x00,
- 0x04, 0x04, 0x3F, 0x44, 0x24, 0x00,
- 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00,
- 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00,
- 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00,
- 0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
- 0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00,
- 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00,
- 0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
- 0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
- 0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
- 0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
- 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00
-};
diff --git a/keyboards/satt/comet46/rules.mk b/keyboards/satt/comet46/rules.mk
index e177fc6441..83f7d905e9 100644
--- a/keyboards/satt/comet46/rules.mk
+++ b/keyboards/satt/comet46/rules.mk
@@ -17,9 +17,8 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
CUSTOM_MATRIX = lite
+OLED_DRIVER = SSD1306
# project specific files
-SRC += matrix.c \
- i2c.c \
- ssd1306.c
+SRC += matrix.c
QUANTUM_LIB_SRC += uart.c
diff --git a/keyboards/satt/comet46/ssd1306.c b/keyboards/satt/comet46/ssd1306.c
deleted file mode 100644
index 4bd2d80bc4..0000000000
--- a/keyboards/satt/comet46/ssd1306.c
+++ /dev/null
@@ -1,343 +0,0 @@
-#ifdef SSD1306OLED
-
-#include "ssd1306.h"
-#include "i2c.h"
-#include <string.h>
-#include "print.h"
-#ifdef PROTOCOL_LUFA
-#include "lufa.h"
-#endif
-#include "sendchar.h"
-#include "timer.h"
-
-struct CharacterMatrix display;
-
-extern const unsigned char font[] PROGMEM;
-
-// Set this to 1 to help diagnose early startup problems
-// when testing power-on with ble. Turn it off otherwise,
-// as the latency of printing most of the debug info messes
-// with the matrix scan, causing keys to drop.
-#define DEBUG_TO_SCREEN 0
-
-//static uint16_t last_battery_update;
-//static uint32_t vbat;
-//#define BatteryUpdateInterval 10000 /* milliseconds */
-
-// 'last_flush' is declared as uint16_t,
-// so this must be less than 65535
-#define ScreenOffInterval 60000 /* milliseconds */
-#if DEBUG_TO_SCREEN
-static uint8_t displaying;
-#endif
-static uint16_t last_flush;
-
-static bool force_dirty = true;
-
-// Write command sequence.
-// Returns true on success.
-static inline bool _send_cmd1(uint8_t cmd) {
- bool res = false;
-
- if (i2c_start_write(SSD1306_ADDRESS)) {
- xprintf("failed to start write to %d\n", SSD1306_ADDRESS);
- goto done;
- }
-
- if (i2c_master_write(0x0 /* command byte follows */)) {
- print("failed to write control byte\n");
-
- goto done;
- }
-
- if (i2c_master_write(cmd)) {
- xprintf("failed to write command %d\n", cmd);
- goto done;
- }
- res = true;
-done:
- i2c_master_stop();
- return res;
-}
-
-// Write 2-byte command sequence.
-// Returns true on success
-static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) {
- if (!_send_cmd1(cmd)) {
- return false;
- }
- return _send_cmd1(opr);
-}
-
-// Write 3-byte command sequence.
-// Returns true on success
-static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) {
- if (!_send_cmd1(cmd)) {
- return false;
- }
- if (!_send_cmd1(opr1)) {
- return false;
- }
- return _send_cmd1(opr2);
-}
-
-#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;}
-#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;}
-#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;}
-
-static void clear_display(void) {
- matrix_clear(&display);
-
- // Clear all of the display bits (there can be random noise
- // in the RAM on startup)
- send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1);
- send_cmd3(ColumnAddr, 0, DisplayWidth - 1);
-
- if (i2c_start_write(SSD1306_ADDRESS)) {
- goto done;
- }
- if (i2c_master_write(0x40)) {
- // Data mode
- goto done;
- }
- for (uint8_t row = 0; row < MatrixRows; ++row) {
- for (uint8_t col = 0; col < DisplayWidth; ++col) {
- i2c_master_write(0);
- }
- }
-
- display.dirty = false;
-
-done:
- i2c_master_stop();
-}
-
-#if DEBUG_TO_SCREEN
-#undef sendchar
-static int8_t capture_sendchar(uint8_t c) {
- sendchar(c);
- iota_gfx_write_char(c);
-
- if (!displaying) {
- iota_gfx_flush();
- }
- return 0;
-}
-#endif
-
-bool iota_gfx_init(bool rotate) {
- bool success = false;
-
- i2c_master_init();
- send_cmd1(DisplayOff);
- send_cmd2(SetDisplayClockDiv, 0x80);
- send_cmd2(SetMultiPlex, DisplayHeight - 1);
-
- send_cmd2(SetDisplayOffset, 0);
-
-
- send_cmd1(SetStartLine | 0x0);
- send_cmd2(SetChargePump, 0x14 /* Enable */);
- send_cmd2(SetMemoryMode, 0 /* horizontal addressing */);
-
- if(rotate){
- // the following Flip the display orientation 180 degrees
- send_cmd1(SegRemap);
- send_cmd1(ComScanInc);
- }else{
- // Flips the display orientation 0 degrees
- send_cmd1(SegRemap | 0x1);
- send_cmd1(ComScanDec);
- }
-
- send_cmd2(SetComPins, 0x2);
- send_cmd2(SetContrast, 0x8f);
- send_cmd2(SetPreCharge, 0xf1);
- send_cmd2(SetVComDetect, 0x40);
- send_cmd1(DisplayAllOnResume);
- send_cmd1(NormalDisplay);
- send_cmd1(DeActivateScroll);
- send_cmd1(DisplayOn);
-
- send_cmd2(SetContrast, 0); // Dim
-
- clear_display();
-
- success = true;
-
- iota_gfx_flush();
-
-#if DEBUG_TO_SCREEN
- print_set_sendchar(capture_sendchar);
-#endif
-
-done:
- return success;
-}
-
-bool iota_gfx_off(void) {
- bool success = false;
-
- send_cmd1(DisplayOff);
- success = true;
-
-done:
- return success;
-}
-
-bool iota_gfx_on(void) {
- bool success = false;
-
- send_cmd1(DisplayOn);
- success = true;
-
-done:
- return success;
-}
-
-void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
- *matrix->cursor = c;
- ++matrix->cursor;
-
- if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) {
- // We went off the end; scroll the display upwards by one line
- memmove(&matrix->display[0], &matrix->display[1],
- MatrixCols * (MatrixRows - 1));
- matrix->cursor = &matrix->display[MatrixRows - 1][0];
- memset(matrix->cursor, ' ', MatrixCols);
- }
-}
-
-void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
- matrix->dirty = true;
-
- if (c == '\n') {
- // Clear to end of line from the cursor and then move to the
- // start of the next line
- uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols;
-
- while (cursor_col++ < MatrixCols) {
- matrix_write_char_inner(matrix, ' ');
- }
- return;
- }
-
- matrix_write_char_inner(matrix, c);
-}
-
-void iota_gfx_write_char(uint8_t c) {
- matrix_write_char(&display, c);
-}
-
-void matrix_write(struct CharacterMatrix *matrix, const char *data) {
- const char *end = data + strlen(data);
- while (data < end) {
- matrix_write_char(matrix, *data);
- ++data;
- }
-}
-
-void matrix_write_ln(struct CharacterMatrix *matrix, const char *data) {
- char data_ln[strlen(data)+2];
- snprintf(data_ln, sizeof(data_ln), "%s\n", data);
- matrix_write(matrix, data_ln);
-}
-
-void iota_gfx_write(const char *data) {
- matrix_write(&display, data);
-}
-
-void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
- while (true) {
- uint8_t c = pgm_read_byte(data);
- if (c == 0) {
- return;
- }
- matrix_write_char(matrix, c);
- ++data;
- }
-}
-
-void iota_gfx_write_P(const char *data) {
- matrix_write_P(&display, data);
-}
-
-void matrix_clear(struct CharacterMatrix *matrix) {
- memset(matrix->display, ' ', sizeof(matrix->display));
- matrix->cursor = &matrix->display[0][0];
- matrix->dirty = true;
-}
-
-void iota_gfx_clear_screen(void) {
- matrix_clear(&display);
-}
-
-void matrix_render(struct CharacterMatrix *matrix) {
- last_flush = timer_read();
- iota_gfx_on();
-#if DEBUG_TO_SCREEN
- ++displaying;
-#endif
-
- // Move to the home position
- send_cmd3(PageAddr, 0, MatrixRows - 1);
- send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1);
-
- if (i2c_start_write(SSD1306_ADDRESS)) {
- goto done;
- }
- if (i2c_master_write(0x40)) {
- // Data mode
- goto done;
- }
-
- for (uint8_t row = 0; row < MatrixRows; ++row) {
- for (uint8_t col = 0; col < MatrixCols; ++col) {
- const uint8_t *glyph = font + (matrix->display[row][col] * FontWidth);
-
- for (uint8_t glyphCol = 0; glyphCol < FontWidth; ++glyphCol) {
- uint8_t colBits = pgm_read_byte(glyph + glyphCol);
- i2c_master_write(colBits);
- }
-
- // 1 column of space between chars (it's not included in the glyph)
- //i2c_master_write(0);
- }
- }
-
- matrix->dirty = false;
-
-done:
- i2c_master_stop();
-#if DEBUG_TO_SCREEN
- --displaying;
-#endif
-}
-
-void iota_gfx_flush(void) {
- matrix_render(&display);
-}
-