diff options
Diffstat (limited to 'keyboards/ryanskidmore/rskeys100/config.h')
| -rw-r--r-- | keyboards/ryanskidmore/rskeys100/config.h | 85 |
1 files changed, 85 insertions, 0 deletions
diff --git a/keyboards/ryanskidmore/rskeys100/config.h b/keyboards/ryanskidmore/rskeys100/config.h new file mode 100644 index 0000000000..9e036aa70d --- /dev/null +++ b/keyboards/ryanskidmore/rskeys100/config.h @@ -0,0 +1,85 @@ +// Copyright 2021 Ryan Skidmore (@ryanskidmore, rskeys@ryanskidmore.co.uk) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x7273 // rs +#define PRODUCT_ID 0x0064 // 100 +#define DEVICE_VER 0x0001 // rev 1 +#define MANUFACTURER ryanskidmore +#define PRODUCT rsKeys100 + +/* Key Matrix Sizes */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 24 + +/* Rows */ +#define ROW_A D4 +#define ROW_B C6 +#define ROW_C D7 +#define ROW_D E6 +#define ROW_E B4 +#define ROW_F B5 + +/* Columns 0 - 20 (24 with dummy columns for shift registers) */ +#define SHR_LATCH B2 +#define SHR_CLOCK B3 +#define SHR_DATA B1 +#define SHR_COLS { 0x000001, 0x000002, 0x000004, 0x000008, 0x000010, 0x000020, 0x000040, 0x000080, 0x000100, 0x000200, 0x000400, 0x000800, 0x001000, 0x002000, 0x004000, 0x008000, 0x010000, 0x020000, 0x040000, 0x080000, 0x100000, 0x200000, 0x400000, 0x800000 } + +/* The shift registers on the matrix PCB output a signal on each column, which passes through the + * switch and a diode towards the row. The row is then connected to the AVR as an input. This means + * the diode direction is COL(umn) to ROW */ +#define DIODE_DIRECTION COL2ROW + +/* RGB Data Pin */ +#define RGB_DI_PIN C7 +/* The number of RGB LEDs connected */ +#define DRIVER_LED_TOTAL 105 +/* Set the maximum brightness to 110 to avoid going over 500 mA. + * At full brightness with all three indicator LEDs on, the power draw is about 450 mA. */ +#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 110 +/* Enable framebuffer effects */ +#define RGB_MATRIX_FRAMEBUFFER_EFFECTS +/* Enable the cycle left right animation and set it as the startup mode */ +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* Set the max power consumption for the keyboard, which is 500 mA. */ +#define USB_MAX_POWER_CONSUMPTION 500 + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +#define FORCE_NKRO + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION
\ No newline at end of file |