diff options
Diffstat (limited to 'keyboards/roadkit')
29 files changed, 0 insertions, 1489 deletions
diff --git a/keyboards/roadkit/config.h b/keyboards/roadkit/config.h deleted file mode 100644 index 9596f7f3b2..0000000000 --- a/keyboards/roadkit/config.h +++ /dev/null @@ -1,162 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEAE -#define PRODUCT_ID 0x8846 -#define DEVICE_VER 0x0001 -#define MANUFACTURER TheVan Keyboards -#define PRODUCT Roadkit Micro -#define DESCRIPTION keyboard firmware for Roadkit Micro - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 4 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F0, F5, D7, B4 } -#define MATRIX_COL_PINS { F1, F4, D6, D4 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/roadkit/info.json b/keyboards/roadkit/info.json deleted file mode 100644 index 839ac73fbf..0000000000 --- a/keyboards/roadkit/info.json +++ /dev/null @@ -1,15 +0,0 @@ -{ - "keyboard_name": "Roadkit", - "url": "", - "maintainer": "qmk", - "width": 4, - "height": 4, - "layouts": { - "LAYOUT_numpad_4x4": { - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0, "h":2}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2, "h":2}, {"x":0, "y":3, "w":2}, {"x":2, "y":3}] - }, - "LAYOUT_ortho_4x4": { - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}] - } - } -} diff --git a/keyboards/roadkit/keymaps/default/config.h b/keyboards/roadkit/keymaps/default/config.h deleted file mode 100644 index df06a26206..0000000000 --- a/keyboards/roadkit/keymaps/default/config.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here - -#endif
\ No newline at end of file diff --git a/keyboards/roadkit/keymaps/default/keymap.c b/keyboards/roadkit/keymaps/default/keymap.c deleted file mode 100644 index 4ec0f6cfdc..0000000000 --- a/keyboards/roadkit/keymaps/default/keymap.c +++ /dev/null @@ -1,48 +0,0 @@ -#include QMK_KEYBOARD_H - -extern keymap_config_t keymap_config; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. - -#define _NP 0 - -// Macro name shortcuts -#define NUMPAD M(_NP) - -// Fillers to make layering more clear -#define _______ KC_TRNS -#define XXXXXXX KC_NO - - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_NP] = LAYOUT_numpad_4x4( /* Numpad */ - KC_P7, KC_P8, KC_P9, KC_PPLS, \ - KC_P4, KC_P5, KC_P6, \ - KC_P1, KC_P2, KC_P3, KC_PENT, \ - KC_P0, KC_PDOT \ - ), -}; - -const uint16_t PROGMEM fn_actions[] = { - -}; - -void persistent_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - switch(id) { - case _NP: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_NP); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/roadkit/keymaps/default/readme.md b/keyboards/roadkit/keymaps/default/readme.md deleted file mode 100644 index 5984a71d1a..0000000000 --- a/keyboards/roadkit/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for roadkit diff --git a/keyboards/roadkit/keymaps/default/rules.mk b/keyboards/roadkit/keymaps/default/rules.mk deleted file mode 100644 index f4671a9d11..0000000000 --- a/keyboards/roadkit/keymaps/default/rules.mk +++ /dev/null @@ -1,21 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif
\ No newline at end of file diff --git a/keyboards/roadkit/keymaps/flipphone/config.h b/keyboards/roadkit/keymaps/flipphone/config.h deleted file mode 100644 index df06a26206..0000000000 --- a/keyboards/roadkit/keymaps/flipphone/config.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here - -#endif
\ No newline at end of file diff --git a/keyboards/roadkit/keymaps/flipphone/keymap.c b/keyboards/roadkit/keymaps/flipphone/keymap.c deleted file mode 100644 index fed9d02706..0000000000 --- a/keyboards/roadkit/keymaps/flipphone/keymap.c +++ /dev/null @@ -1,219 +0,0 @@ -#include QMK_KEYBOARD_H - -extern keymap_config_t keymap_config; - -#ifdef BACKLIGHT_ENABLE - #include "backlight.h" -#endif - -#ifdef AUDIO_ENABLE - #include "audio.h" -#endif - -void backlight_toggle(void){ -}; - -enum roadkit_layers { - _NUMPAD, - _FPH, - _FPHNOISY, - _ADJUST, - _DYN -}; - -enum roadkit_keycodes { - NUMPAD = SAFE_RANGE, - FPH_1, - FPH_2, - FPH_3, - FPH_4, - FPH_5, - FPH_6, - FPH_7, - FPH_8, - FPH_9, - FN_0, - BACKLIT, - MACSLEEP, - DYNAMIC_MACRO_RANGE, -}; - -#include "dynamic_macro.h" - -// Fillers to make keymaps cleaner looking -#define _______ KC_TRNS -#define XXXXXXX KC_NO - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_NUMPAD] = LAYOUT_numpad_4x4( /* Numpad */ - KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS, \ - KC_KP_4, KC_KP_5, KC_KP_6, \ - KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_ENTER, \ - LT(_ADJUST, KC_KP_0), KC_KP_DOT \ - ), - [_FPH] = LAYOUT_numpad_4x4( /* Quiet T9 */ - FPH_7, FPH_8, FPH_9, KC_KP_PLUS, \ - FPH_4, FPH_5, FPH_6, \ - FPH_1, FPH_2, FPH_3, SFT_T(KC_KP_ENTER), \ - LT(_ADJUST, KC_SPACE), KC_KP_DOT \ - ), - [_FPHNOISY] = LAYOUT_numpad_4x4( /* Noisy T9 */ - FPH_7, FPH_8, FPH_9, KC_KP_PLUS, \ - FPH_4, FPH_5, FPH_6, \ - FPH_1, FPH_2, FPH_3, SFT_T(KC_KP_ENTER), \ - LT(_ADJUST, KC_SPACE), KC_KP_DOT \ - ), - [_ADJUST] = LAYOUT_numpad_4x4( /* Adjustments */ - KC_NUMLOCK, TG(_FPHNOISY), TG(_FPH), TG(_NUMPAD), \ - KC_BSPC, BACKLIT, KC_DEL, \ - MACSLEEP, _______, _______, _______, \ - _______, MO(_DYN) \ - ), - [_DYN] = LAYOUT_numpad_4x4( /* DYNAMIC MACRO */ - DYN_REC_START1, DYN_REC_START2, _______, DYN_REC_STOP, \ - _______, _______, _______, \ - DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, _______, _______, \ - _______, _______ \ - ), -}; - -const uint16_t PROGMEM fn_actions[] = { - -}; - -void persistant_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -uint16_t fph_tap_qty = false; -uint16_t fph_keycode = 0; // stores which spacebar was used, either raise or lower... - -uint16_t get_render_keycode(uint16_t keycode, uint16_t tap_qty){ // maybe replace shift with "mods" - tap_qty--; // reduce by one to match array indexes. - switch(keycode){ - case FPH_2: - {uint16_t kc[] = {KC_A, KC_B, KC_C}; - if(tap_qty % 6 > 2) - return LSFT(kc[tap_qty % 3]); - return kc[tap_qty % 3];} - break; - case FPH_3: - {uint16_t kc[] = {KC_D, KC_E, KC_F}; - if(tap_qty % 6 > 2) - return LSFT(kc[tap_qty % 3]); - return kc[tap_qty % 3];} - break; - case FPH_4: - {uint16_t kc[] = {KC_G, KC_H, KC_I}; - if(tap_qty % 6 > 2) - return LSFT(kc[tap_qty % 3]); - return kc[tap_qty % 3];} - break; - case FPH_5: - {uint16_t kc[] = {KC_J, KC_K, KC_L}; - if(tap_qty % 6 > 2) - return LSFT(kc[tap_qty % 3]); - return kc[tap_qty % 3];} - break; - case FPH_6: - {uint16_t kc[] = {KC_M, KC_N, KC_O}; - if(tap_qty % 6 > 2) - return LSFT(kc[tap_qty % 3]); - return kc[tap_qty % 3];} - break; - case FPH_7: - {uint16_t kc[] = {KC_P, KC_Q, KC_R, KC_S}; - if(tap_qty % 8 > 2) - return LSFT(kc[tap_qty % 4]); - return kc[tap_qty % 4];} - break; - case FPH_8: - {uint16_t kc[] = {KC_T, KC_U, KC_V}; - if(tap_qty % 8 > 2) - return LSFT(kc[tap_qty % 4]); - return kc[tap_qty % 4];} - break; - case FPH_9: - {uint16_t kc[] = {KC_W, KC_X, KC_Y, KC_Z}; - if(tap_qty % 8 > 2) - return LSFT(kc[tap_qty % 4]); - return kc[tap_qty % 4];} - break; - case FPH_1: - {uint16_t kc[] = {KC_COMM, LSFT(KC_SLSH), KC_EXLM, KC_AT, KC_MINS, KC_UNDS, KC_PLUS, \ - KC_SCLN, LSFT(KC_SCLN), KC_QUOT, LSFT(KC_QUOT), KC_TILD, \ - KC_PIPE, KC_BSLS, KC_HASH, LSFT(KC_4), KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, \ - KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR, LSFT(KC_COMM), LSFT(KC_DOT)}; - return kc[tap_qty % 26];} - } - return KC_NO; -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - if (!process_record_dynamic_macro(keycode, record)) { - return false; - } - uint8_t layer; - layer = biton32(layer_state); - - switch (keycode) { - case FPH_1 ... FPH_9: - if(layer == _FPHNOISY){ - if (record->event.pressed) { - if(fph_keycode != keycode) { // key change - fph_tap_qty = 0; - fph_keycode = keycode; - } else { // same key tapped again so erase and increment. - register_code(KC_BSPC); - unregister_code(KC_BSPC); - fph_tap_qty++; - } - uint16_t render_keycode = get_render_keycode(keycode, fph_tap_qty); - // find mods? Apply mods.. - register_code(render_keycode); - unregister_code(render_keycode); - } else { - // do we need to do anything on key-release? - } - } else { // not noisy, be demure . - if (record->event.pressed) { - if(fph_keycode != keycode) { // key change, kill everything. - uint16_t render_keycode = get_render_keycode(fph_keycode, fph_tap_qty); - // find mods? Apply mods.. - register_code(render_keycode); - unregister_code(render_keycode); - fph_keycode = keycode; - fph_tap_qty = 0; - } else { // same key tapped again so increment counter silently - fph_tap_qty++; - } - } else { - // do we need to do anything on key-release? - // maybe start a timer on this one? - } - } - return false; - break; - case BACKLIT: - if (record->event.pressed) { - #ifdef BACKLIGHT_ENABLE - backlight_step(); - #endif - } - return false; - break; - case MACSLEEP: - if (record->event.pressed) { - register_code(KC_RSFT); - register_code(KC_RCTL); - register_code(KC_POWER); - unregister_code(KC_POWER); - unregister_code(KC_RCTL); - unregister_code(KC_RSFT); - } - return false; - break; - } - return true; -} diff --git a/keyboards/roadkit/keymaps/flipphone/readme.md b/keyboards/roadkit/keymaps/flipphone/readme.md deleted file mode 100644 index ad630be195..0000000000 --- a/keyboards/roadkit/keymaps/flipphone/readme.md +++ /dev/null @@ -1,26 +0,0 @@ -# Flip Phone layout for Roadkit - -BEWARE, THIS DOES NOT WORK YET. - -Uses the numpad with classic cellular phone style letters assigned to the numbers. - -# LAYERS - -* Numpad - The layer that matches the caps mostly -* FPH - Base layer for text -* FPHNOISY - Text layer that outputs every character and then backspaces as they're replaced -* DYN - dynamic macro layer for recording and playing macros - -## FPH - -Poke the "2" key twice and it makes "B". - -## FPHNOISY - -Poke the "2" key twice and it makes "A"+backspace+"B" so you can see it cycle through. - -## MACROS - -May be able to record macros with the T9 layer because the "KC_*"s are only sent -at the end. Trying to do a macro with T9NOISY would probably fill up the buffer -in just a few characters. diff --git a/keyboards/roadkit/keymaps/flipphone/rules.mk b/keyboards/roadkit/keymaps/flipphone/rules.mk deleted file mode 100644 index f4671a9d11..0000000000 --- a/keyboards/roadkit/keymaps/flipphone/rules.mk +++ /dev/null @@ -1,21 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif
\ No newline at end of file diff --git a/keyboards/roadkit/keymaps/khord/config.h b/keyboards/roadkit/keymaps/khord/config.h deleted file mode 100644 index da6ed7189c..0000000000 --- a/keyboards/roadkit/keymaps/khord/config.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here -#define TAPPING_TERM 175 - -#ifdef BACKLIGHT_ENABLE - #define BACKLIGHT_PIN B5 - #define BACKLIGHT_LEVELS 3 - #define BACKLIGHT_ON_STATE 0 -#endif - -#endif diff --git a/keyboards/roadkit/keymaps/khord/keymap.c b/keyboards/roadkit/keymaps/khord/keymap.c deleted file mode 100644 index 9111f4f898..0000000000 --- a/keyboards/roadkit/keymaps/khord/keymap.c +++ /dev/null @@ -1,112 +0,0 @@ -#include QMK_KEYBOARD_H - -extern keymap_config_t keymap_config; - -#define _NP 0 -#define _L1 1 -#define _L2 2 - -// Fillers to make layering more clear -#define _______ KC_TRNS -#define XXXXXXX KC_NO - -enum custom_keycodes { - NUMPAD = SAFE_RANGE, - ADMIN, - SMSPC1, - STR192, - STR255 -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* Numpad - * ,-----------------------. - * | 7 | 8 | 9 |Bksp | - * |-----`-----`-----`-----| - * | 4 | 5 | 6 | Tab | - * |-----`-----`-----`-----| - * | 1 | 2 | 3 |Enter| - * |-----`-----`-----`-----| - * | 0 |Space| . | / | - * `-----`-----`-----`-----' - * | L1 | L2 | | | Layer hold - */ - [_NP] = LAYOUT_ortho_4x4( /* Numpad */ - KC_P7, KC_P8, KC_P9, KC_BSPC, \ - KC_P4, KC_P5, KC_P6, KC_TAB, \ - KC_P1, KC_P2, KC_P3, KC_PENT, \ - LT(1, KC_P0), LT(2, KC_SPC), KC_PDOT, KC_PSLS - ), - - /* L1 - * ,-----------------------. - * |Reset| | | Del | - * |-----`-----`-----`-----| - * | Left| Down| Up |Right| - * |-----`-----`-----`-----| - * | 192.| 255 | | | - * |-----`-----`-----`-----| - * |_____| LED | . | | - * `-----`-----`-----`-----' - */ - [_L1] = LAYOUT_ortho_4x4( /* LAYER 1 */ - RESET, XXXXXXX, XXXXXXX, KC_DEL, \ - KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, \ - STR192, STR255, XXXXXXX, XXXXXXX, \ - _______, BL_STEP, _______, XXXXXXX - ), - - /* L2 - * ,-----------------------. - * | | | str | str | - * |-----`-----`-----`-----| - * | | | | | - * |-----`-----`-----`-----| - * | | | | | - * |-----`-----`-----`-----| - * | |_____| | | - * `-----`-----`-----`-----' - */ - [_L2] = LAYOUT_ortho_4x4( /* LAYER 2 */ - XXXXXXX, XXXXXXX, ADMIN, SMSPC1, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - XXXXXXX, _______, XXXXXXX, XXXXXXX - ) -}; - -void persistent_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case ADMIN: - if (record->event.pressed) { - SEND_STRING("Administrator"); - } - return false; - break; - case SMSPC1: - if (record->event.pressed) { - SEND_STRING("Simspace1!"); - } - return false; - break; - case STR192: - if (record->event.pressed) { - SEND_STRING("192.168."); - } - return false; - break; - case STR255: - if (record->event.pressed) { - SEND_STRING("255"); - } - return false; - break; - } - return true; -}; diff --git a/keyboards/roadkit/keymaps/khord/rules.mk b/keyboards/roadkit/keymaps/khord/rules.mk deleted file mode 100644 index 9f3c958bd8..0000000000 --- a/keyboards/roadkit/keymaps/khord/rules.mk +++ /dev/null @@ -1,22 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -TAP_DANCE_ENABLE = no # Enable Tap Dance functionality - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif diff --git a/keyboards/roadkit/keymaps/mjt/config.h b/keyboards/roadkit/keymaps/mjt/config.h deleted file mode 100644 index df06a26206..0000000000 --- a/keyboards/roadkit/keymaps/mjt/config.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here - -#endif
\ No newline at end of file diff --git a/keyboards/roadkit/keymaps/mjt/keymap.c b/keyboards/roadkit/keymaps/mjt/keymap.c deleted file mode 100644 index a1af5b1f28..0000000000 --- a/keyboards/roadkit/keymaps/mjt/keymap.c +++ /dev/null @@ -1,239 +0,0 @@ -#include QMK_KEYBOARD_H - -extern keymap_config_t keymap_config; - -#ifdef BACKLIGHT_ENABLE - #include "backlight.h" -#endif - -#ifdef AUDIO_ENABLE - #include "audio.h" -#endif - -void backlight_toggle(void){ -}; - -enum roadkit_layers { - _NUMPAD, - _NAVIGATION, - _EXCEL, - _ADJUST, - _DYN -}; - -enum minivan_keycodes { - NUMPAD = SAFE_RANGE, - NAVIGATION, - EXCEL, - NUMPAD_LOCK, - NAVIGATION_LOCK, - EXCEL_LOCK, - PARENS, - BRACKETS, - BRACES, - BACKLIT, - MACSLEEP, - DYNAMIC_MACRO_RANGE, -}; - -#include "dynamic_macro.h" - -// Fillers to make keymaps cleaner looking -#define _______ KC_TRNS -#define XXXXXXX KC_NO - - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_NUMPAD] = LAYOUT_numpad_4x4( /* Numpad */ - KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS, \ - KC_KP_4, KC_KP_5, KC_KP_6, \ - KC_KP_1, KC_KP_2, KC_KP_3, NAVIGATION, \ - EXCEL, KC_KP_DOT - ), - [_EXCEL] = LAYOUT_numpad_4x4( /* Excel related */ - KC_KP_SLASH, KC_KP_ASTERISK, KC_MINS, KC_TAB, \ - KC_QUOT, KC_KP_EQUAL, PARENS, \ - KC_DQT, BRACKETS, BRACES, _______, \ - _______, MO(_DYN) - ), - [_NAVIGATION] = LAYOUT_numpad_4x4( /* Navigation */ - KC_HOME, _______, KC_PGUP, KC_TAB, \ - KC_END, KC_UP, KC_PGDN, \ - KC_LEFT, KC_DOWN, KC_RIGHT, _______, \ - _______, MO(_DYN) - ), - [_ADJUST] = LAYOUT_numpad_4x4( /* Adjustments */ - KC_NUMLOCK, MACSLEEP, BACKLIT, _______, \ - KC_BSPC, _______, KC_DEL, \ - EXCEL_LOCK, NUMPAD_LOCK, NAVIGATION_LOCK, _______, \ - _______, _______ - ), |