diff options
Diffstat (limited to 'keyboards/rgbkb/sol3/config.h')
| -rw-r--r-- | keyboards/rgbkb/sol3/config.h | 177 |
1 files changed, 0 insertions, 177 deletions
diff --git a/keyboards/rgbkb/sol3/config.h b/keyboards/rgbkb/sol3/config.h deleted file mode 100644 index 195953f7ae..0000000000 --- a/keyboards/rgbkb/sol3/config.h +++ /dev/null @@ -1,177 +0,0 @@ -/* - * ---------------------------------------------------------------------------- - * "THE BEER-WARE LICENSE" (Revision 42): - * <https://github.com/Legonut> wrote this file. As long as you retain this - * notice you can do whatever you want with this stuff. If we meet some day, and - * you think this stuff is worth it, you can buy me a beer in return. David Rauseo - * ---------------------------------------------------------------------------- - */ - -#pragma once - -#include "config_common.h" - -/* Matrix Configuration - Rows are doubled up */ -#define MATRIX_ROWS 12 -// Last pins reserved for encoder / touch encoder support -#define MATRIX_ROW_PINS { B15, A8, A15, B12, A3, NO_PIN } -#define MATRIX_ROW_PINS_RIGHT { B15, B14, A8, A13, A7, NO_PIN } -#define MATRIX_COLS 8 -// Empty matrix entries used for encoder / touch encoder support -#define MATRIX_COL_PINS { A6, A7, B0, B2, B1, B9, B3, B4 } -#define MATRIX_COL_PINS_RIGHT { B9, B8, B4, A6, A3, B10, B12, B11 } -#define MATRIX_IO_DELAY 5 - -#define BUSY_WAIT -#define BUSY_WAIT_INSTRUCTIONS 35 // Increase if two rows are pressed at the same time. -#define GPIO_INPUT_PIN_DELAY 10 - -/* Touchbar adjustments */ -#define TOUCH_DEADZONE 50 // width of a "button", wider inputs will be interpreted as a swipe -#define TOUCH_TERM 350 // time of a "button" touch, longer inputs will be a swipe -#define TOUCH_RESOLUTION 25 // sensitivity of swipes, lower=faster -#define TOUCH_SEGMENTS 3 - -/* Encoder Configuration */ -// Matrix Entries k36/k35(E1SW>B13), k33/k32, k7/k28 -#define ENCODERS_PAD_A { A1, B10, A13 } -#define ENCODERS_PAD_B { A2, B11, B14 } -// Matrix Entries k72/k71(E5SW>B0), k69/k68, k43/k64 -#define ENCODERS_PAD_A_RIGHT { A1, C15, B3 } -#define ENCODERS_PAD_B_RIGHT { A2, C14, B13 } - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* CRC Configuration */ -#define CRC8_OPTIMIZE_SPEED -#define CRC8_USE_TABLE - -/* Split Keyboard Configuration */ -#define SPLIT_HAND_PIN C13 -#define SPLIT_USB_DETECT -// also handles the SERIAL_USART_TX_PIN define -#define SOFT_SERIAL_PIN A9 -#define SERIAL_USART_TX_PAL_MODE 7 -#define SERIAL_USART_TIMEOUT 5 -#define SERIAL_USART_DRIVER SD1 -//#define SERIAL_USART_FULL_DUPLEX - Waiting on reunification pr -#if SERIAL_USART_FULL_DUPLEX - #define SERIAL_USART_RX_PIN A10 - #define SERIAL_USART_RX_PAL_MODE 7 - // Mun connects TX to TX and RX to RX as we were planning on i2c split, so we need pin swap for full duplex - #define SERIAL_USART_PIN_SWAP - #define SERIAL_USART_SPEED (2 * 1024 * 1024) -#else - #define SERIAL_USART_SPEED (1 * 1024 * 1024) -#endif - -/* Split Transport Features */ -#define SPLIT_TRANSPORT_MIRROR -#define SPLIT_LAYER_STATE_ENABLE -#define SPLIT_LED_STATE_ENABLE -#define SPLIT_TRANSACTION_IDS_KB TOUCH_ENCODER_SYNC, RGB_MENU_SYNC - -/* LED Turbo DIP Switch */ -#define DIP_SWITCH_PINS { A14, B13 } -#define DIP_SWITCH_PINS_RIGHT { A14, B0 } - -/* RGB LED Configuration */ -#define RGB_DI_PIN B5 -#define RGBLED_NUM 156 -#define RGBLED_SPLIT { 78, 78 } -#define RGBLIGHT_LIMIT_VAL 255 - -// RGB Lighting Animation modes. Explicitly enabled -// For full list of effects, see: -// https://docs.qmk.fm/#/feature_rgblight?id=effect-and-animation-toggles -#define RGBLIGHT_EFFECT_BREATHING -#define RGBLIGHT_EFFECT_RAINBOW_MOOD -#define RGBLIGHT_EFFECT_RAINBOW_SWIRL -#define RGBLIGHT_EFFECT_SNAKE -#define RGBLIGHT_EFFECT_KNIGHT -#define RGBLIGHT_EFFECT_CHRISTMAS -#define RGBLIGHT_EFFECT_STATIC_GRADIENT -#define RGBLIGHT_EFFECT_RGB_TEST -#define RGBLIGHT_EFFECT_ALTERNATING -#define RGBLIGHT_EFFECT_TWINKLE - -#define RGB_MATRIX_LED_COUNT 156 -#define RGB_MATRIX_SPLIT { 78, 78 } -#define RGB_MATRIX_CENTER { 81, 28 } -#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 -#define RGB_MATRIX_LED_FLUSH_LIMIT 33 -#define RGB_MATRIX_LED_PROCESS_LIMIT 10 -#define RGB_DISABLE_WHEN_USB_SUSPENDED - -// RGB Matrix Animation modes. Explicitly enabled -// For full list of effects, see: -// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects -#define ENABLE_RGB_MATRIX_ALPHAS_MODS -#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN -#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT -#define ENABLE_RGB_MATRIX_BREATHING -#define ENABLE_RGB_MATRIX_BAND_SAT -#define ENABLE_RGB_MATRIX_BAND_VAL -#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL -#define ENABLE_RGB_MATRIX_CYCLE_ALL -#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN -#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN -#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL -#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL -#define ENABLE_RGB_MATRIX_DUAL_BEACON -#define ENABLE_RGB_MATRIX_RAINBOW_BEACON -#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS -#define ENABLE_RGB_MATRIX_RAINDROPS -#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -#define ENABLE_RGB_MATRIX_HUE_BREATHING -#define ENABLE_RGB_MATRIX_HUE_PENDULUM -#define ENABLE_RGB_MATRIX_HUE_WAVE -#define ENABLE_RGB_MATRIX_PIXEL_RAIN -#define ENABLE_RGB_MATRIX_PIXEL_FLOW -#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL -// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined -#define RGB_MATRIX_FRAMEBUFFER_EFFECTS -#define ENABLE_RGB_MATRIX_TYPING_HEATMAP -#define ENABLE_RGB_MATRIX_DIGITAL_RAIN -// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined -#define RGB_MATRIX_KEYPRESSES -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -#define ENABLE_RGB_MATRIX_SPLASH -#define ENABLE_RGB_MATRIX_MULTISPLASH -#define ENABLE_RGB_MATRIX_SOLID_SPLASH -#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH - -#define WS2812_PWM_DRIVER PWMD3 -#define WS2812_PWM_CHANNEL 2 -#define WS2812_PWM_PAL_MODE 2 -#define WS2812_DMA_STREAM STM32_DMA1_STREAM3 -#define WS2812_DMA_CHANNEL 3 - -#define TOUCH_UPDATE_INTERVAL 33 -#define OLED_UPDATE_INTERVAL 33 -#define TAP_CODE_DELAY 5 - -/* Audio Configuration */ -#define AUDIO_PIN A4 -#define AUDIO_PIN_ALT A5 -#define AUDIO_PIN_ALT_AS_NEGATIVE -#define AUDIO_CLICKY -#define AUDIO_DAC_SAMPLE_WAVEFORM_SQUARE -#define AUDIO_DAC_OFF_VALUE 0 - -#define WEAR_LEVELING_BACKING_SIZE 4096 -#define WEAR_LEVELING_LOGICAL_SIZE 2048 |