diff options
Diffstat (limited to 'keyboards/rgbkb/sol/rev2')
| -rw-r--r-- | keyboards/rgbkb/sol/rev2/config.h | 65 | ||||
| -rw-r--r-- | keyboards/rgbkb/sol/rev2/rules.mk | 35 |
2 files changed, 100 insertions, 0 deletions
diff --git a/keyboards/rgbkb/sol/rev2/config.h b/keyboards/rgbkb/sol/rev2/config.h new file mode 100644 index 0000000000..874ec536b1 --- /dev/null +++ b/keyboards/rgbkb/sol/rev2/config.h @@ -0,0 +1,65 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +/* ws2812 RGB LED */ +#define RGB_DI_PIN B7 + +// Underglow / DIY Tent Glow are parallel to the top row leds, no separate define +// Full Hand case adds 24 LEDs, Star Fighter case adds 38 LEDs +// For mirrored LED control (each MCU controls half the LEDs), total LED counts are divided in half +#ifdef LED_MIRRORED + #ifdef FULLHAND_ENABLE + #define FULLHAND_LEDS 24 + #define RGBLED_NUM 74 + #elif SF_ENABLE + #define FULLHAND_LEDS 38 + #define RGBLED_NUM 81 + #else + #define FULLHAND_LEDS 0 + #define RGBLED_NUM 62 + #endif +#else + #ifdef FULLHAND_ENABLE + #define FULLHAND_LEDS 24 + #define RGBLED_NUM 148 + #elif SF_ENABLE + #define FULLHAND_LEDS 38 + #define RGBLED_NUM 162 + #else + #define FULLHAND_LEDS 0 + #define RGBLED_NUM 124 + #endif +#endif + +#define RGB_MATRIX_LED_COUNT RGBLED_NUM + +#define RGB_MATRIX_CENTER { 112, 37 } + +// Encoder support +#ifndef EXTRA_ENCODERS_ENABLE +#define ENCODERS_PAD_A { D2 } +#define ENCODERS_PAD_B { D6 } +#else +#ifdef OLED_ENABLE + #error Extra encoders cannot be enabled at the same time as the OLED Driver as they use the same pins. +#endif +#define ENCODERS_PAD_A { D2, D1, B0 } +#define ENCODERS_PAD_B { D6, B1, D0 } +#endif diff --git a/keyboards/rgbkb/sol/rev2/rules.mk b/keyboards/rgbkb/sol/rev2/rules.mk new file mode 100644 index 0000000000..681a3e0993 --- /dev/null +++ b/keyboards/rgbkb/sol/rev2/rules.mk @@ -0,0 +1,35 @@ +# RGBKB Sol Rev2 Defaults + +# Keycode Options +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +NKRO_ENABLE = no # Enable N-Key Rollover + +# Debug Options +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration + +# RGB Options +RGBLIGHT_ENABLE = no # Enable global lighting effects. Do not enable with RGB Matrix +LED_MIRRORED = no # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master) + +RGB_MATRIX_ENABLE = yes # Enable per-key coordinate based RGB effects. Do not enable with RGBlight +RGB_MATRIX_DRIVER = WS2812 +RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. +RGB_MATRIX_FRAMEBUFFER_EFFECTS = no # Enable frame buffer effects like the typing heatmap. + +RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness for RGBLIGHT or RGB_MATRIX. Otherwise, limited to a safe level for a normal USB-A port +FULLHAND_ENABLE = no # Enables the additional 24 Full Hand LEDs +SF_ENABLE = no # Enables the additional 38 Starfighter LEDs +IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone) + +# Misc +OLED_ENABLE = no # Enable the OLED Driver +EXTRA_ENCODERS_ENABLE = no # Enables 3 encoders per side (up from 1, not compatible with OLED_ENABLE) +SWAP_HANDS_ENABLE = no # Enable one-hand typing +LTO_ENABLE = yes # Enable Link Time Optimizations greatly reducing firmware size by disabling the old Macros and Functions features + +# Special RGB Matrix, OLED, & Encoder Control Menu! +RGB_OLED_MENU = no # Enabled by setting this to the encoder index (0-5) you wish to use to control the menu. + # Use the RGB_MENU keycode in the keymap for the encoder to advance the menu to the next option. |