diff options
Diffstat (limited to 'keyboards/psuieee/pluto12/config.h')
| -rw-r--r-- | keyboards/psuieee/pluto12/config.h | 110 |
1 files changed, 7 insertions, 103 deletions
diff --git a/keyboards/psuieee/pluto12/config.h b/keyboards/psuieee/pluto12/config.h index 60d3f0a501..b59bd05afe 100644 --- a/keyboards/psuieee/pluto12/config.h +++ b/keyboards/psuieee/pluto12/config.h @@ -1,4 +1,4 @@ -// Copyright 2021 Willem McGloughlin (wymcg) +// Copyright 2021-22 Willem McGloughlin (wymcg) // SPDX-License-Identifier: GPL-2.0-or-later #pragma once @@ -16,123 +16,27 @@ #define MATRIX_ROWS 3 #define MATRIX_COLS 4 -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ +/* Keyboard Matrix Assignments */ #define MATRIX_ROW_PINS { D0, D4, C6 } #define MATRIX_COL_PINS { D7, E6, B4, B5 } #define UNUSED_PINS +/* Encoder Assignments */ +#define ENCODERS_PAD_A { B6 } +#define ENCODERS_PAD_B { B2 } +#define ENCODER_RESOLUTION 4 + /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -//#define LED_NUM_LOCK_PIN B0 -//#define LED_CAPS_LOCK_PIN B1 -//#define LED_SCROLL_LOCK_PIN B2 -//#define LED_COMPOSE_PIN B3 -//#define LED_KANA_PIN B4 - -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_LEVELS 3 -//#define BACKLIGHT_BREATHING - -//#define RGB_DI_PIN E2 -//#ifdef RGB_DI_PIN -//# define RGBLED_NUM 16 -//# define RGBLIGHT_HUE_STEP 8 -//# define RGBLIGHT_SAT_STEP 8 -//# define RGBLIGHT_VAL_STEP 8 -//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -/*== all animations enable ==*/ -//# define RGBLIGHT_ANIMATIONS -/*== or choose animations ==*/ -//# define RGBLIGHT_EFFECT_BREATHING -//# define RGBLIGHT_EFFECT_RAINBOW_MOOD -//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL -//# define RGBLIGHT_EFFECT_SNAKE -//# define RGBLIGHT_EFFECT_KNIGHT -//# define RGBLIGHT_EFFECT_CHRISTMAS -//# define RGBLIGHT_EFFECT_STATIC_GRADIENT -//# define RGBLIGHT_EFFECT_RGB_TEST -//# define RGBLIGHT_EFFECT_ALTERNATING -/*== customize breathing effect ==*/ -/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -/*==== use exp() and sin() ====*/ -//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -//#endif - /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT - /* disable these deprecated features by default */ #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 |