diff options
Diffstat (limited to 'keyboards/primekb')
33 files changed, 72 insertions, 206 deletions
diff --git a/keyboards/primekb/meridian/config.h b/keyboards/primekb/meridian/config.h index 916847cf07..03379a660d 100644 --- a/keyboards/primekb/meridian/config.h +++ b/keyboards/primekb/meridian/config.h @@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 - #define MATRIX_COL_PINS { B11, B10, B2, B1, B0, A7, B9, B8, B7, B6, B5, B4, B3, A15 } #define MATRIX_ROW_PINS { A6, A5, A4, A3, A2 } #define DIODE_DIRECTION COL2ROW @@ -32,9 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define WS2812_SPI_SCK_PAL_MODE 0 #define WS2812_SPI_SCK_PIN B13 -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/primekb/meridian/info.json b/keyboards/primekb/meridian/info.json index c12b1b7587..ab16646490 100644 --- a/keyboards/primekb/meridian/info.json +++ b/keyboards/primekb/meridian/info.json @@ -8,6 +8,8 @@ "pid": "0x004D", "device_version": "0.0.1" }, + "processor": "STM32F072", + "bootloader": "stm32-dfu", "layouts": { "LAYOUT_unified_bs_rshift": { "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":8.5, "y":0}, {"label":"*", "x":9.5, "y":0}, {"label":"(", "x":10.5, "y":0}, {"label":")", "x":11.5, "y":0}, {"label":"_", "x":12.5, "y":0}, {"label":"+", "x":13.5, "y":0}, {"label":"Backspace", "x":14.5, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":8, "y":1}, {"label":"U", "x":9, "y":1}, {"label":"I", "x":10, "y":1}, {"label":"O", "x":11, "y":1}, {"label":"P", "x":12, "y":1}, {"label":"{", "x":13, "y":1}, {"label":"}", "x":14, "y":1}, {"label":"|", "x":15, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":8.25, "y":2}, {"label":"J", "x":9.25, "y":2}, {"label":"K", "x":10.25, "y":2}, {"label":"L", "x":11.25, "y":2}, {"label":":", "x":12.25, "y":2}, {"label":"\"", "x":13.25, "y":2}, {"label":"Enter", "x":14.25, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"B", "x":7.75, "y":3}, {"label":"N", "x":8.75, "y":3}, {"label":"M", "x":9.75, "y":3}, {"label":"<", "x":10.75, "y":3}, {"label":">", "x":11.75, "y":3}, {"label":"?", "x":12.75, "y":3}, {"label":"Shift", "x":13.75, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":3.75, "y":4, "w":1.25}, {"x":5, "y":4, "w":2.25}, {"x":7.75, "y":4, "w":2.75}, {"label":"Alt", "x":10.5, "y":4, "w":1.25}, {"label":"Win", "x":12.75, "y":4, "w":1.25}, {"label":"Menu", "x":14, "y":4, "w":1.25}, {"label":"Ctrl", "x":15.25, "y":4, "w":1.25}] diff --git a/keyboards/primekb/meridian/ktr1010/config.h b/keyboards/primekb/meridian/ktr1010/config.h index faba78554f..e2e4e55992 100644 --- a/keyboards/primekb/meridian/ktr1010/config.h +++ b/keyboards/primekb/meridian/ktr1010/config.h @@ -17,14 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 - -#define MATRIX_COL_PINS { B11, B10, B2, B1, B0, A7, B9, B8, B7, B6, B5, B4, B3, A15 } -#define MATRIX_ROW_PINS { A6, A5, A4, A3, A2 } -#define DIODE_DIRECTION COL2ROW - #define RGB_DI_PIN B15 #define RGBLED_NUM 3 // Special timing definitions for KTR101 @@ -35,9 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define WS2812_T1L 350 #define WS2812_RES_US 100 -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/primekb/meridian/rules.mk b/keyboards/primekb/meridian/rules.mk index 93737e3515..ead22f6c15 100644 --- a/keyboards/primekb/meridian/rules.mk +++ b/keyboards/primekb/meridian/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = STM32F072 - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/primekb/meridian/ws2812/config.h b/keyboards/primekb/meridian/ws2812/config.h index 916847cf07..92ac0a089f 100644 --- a/keyboards/primekb/meridian/ws2812/config.h +++ b/keyboards/primekb/meridian/ws2812/config.h @@ -17,14 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 - -#define MATRIX_COL_PINS { B11, B10, B2, B1, B0, A7, B9, B8, B7, B6, B5, B4, B3, A15 } -#define MATRIX_ROW_PINS { A6, A5, A4, A3, A2 } -#define DIODE_DIRECTION COL2ROW - #define RGB_DI_PIN B15 #define RGBLED_NUM 3 #define WS2812_SPI SPID2 @@ -32,9 +24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define WS2812_SPI_SCK_PAL_MODE 0 #define WS2812_SPI_SCK_PIN B13 -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/primekb/meridian_rgb/config.h b/keyboards/primekb/meridian_rgb/config.h index 542cda7ca6..58186b3e6d 100644 --- a/keyboards/primekb/meridian_rgb/config.h +++ b/keyboards/primekb/meridian_rgb/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 #define MATRIX_COL_PINS { C7, C6, B6, B5, B4, F7, D4, B7, B3, D5, D3, D2, D1, D0 } #define MATRIX_ROW_PINS { E6, F0, F6, D7, D6 } @@ -42,13 +37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_TWINKLE #define RGBLIGHT_LIMIT_VAL 200 -#define LED_NUM_LOCK_PIN B0 -#define LED_CAPS_LOCK_PIN B1 -#define LED_SCROLL_LOCK_PIN B2 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/primekb/meridian_rgb/info.json b/keyboards/primekb/meridian_rgb/info.json index eebf1ea394..c3dcca05e8 100644 --- a/keyboards/primekb/meridian_rgb/info.json +++ b/keyboards/primekb/meridian_rgb/info.json @@ -8,6 +8,13 @@ "pid": "0x0042", "device_version": "0.0.2" }, + "indicators": { + "caps_lock": "B1", + "num_lock": "B0", + "scroll_lock": "B2" + }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":8.5, "y":0}, {"label":"*", "x":9.5, "y":0}, {"label":"(", "x":10.5, "y":0}, {"label":")", "x":11.5, "y":0}, {"label":"_", "x":12.5, "y":0}, {"label":"+", "x":13.5, "y":0}, {"label":"Backspace", "x":14.5, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":8, "y":1}, {"label":"U", "x":9, "y":1}, {"label":"I", "x":10, "y":1}, {"label":"O", "x":11, "y":1}, {"label":"P", "x":12, "y":1}, {"label":"{", "x":13, "y":1}, {"label":"}", "x":14, "y":1}, {"label":"|", "x":15, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":8.25, "y":2}, {"label":"J", "x":9.25, "y":2}, {"label":"K", "x":10.25, "y":2}, {"label":"L", "x":11.25, "y":2}, {"label":":", "x":12.25, "y":2}, {"label":"\"", "x":13.25, "y":2}, {"label":"Enter", "x":14.25, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"B", "x":7.75, "y":3}, {"label":"N", "x":8.75, "y":3}, {"label":"M", "x":9.75, "y":3}, {"label":"<", "x":10.75, "y":3}, {"label":">", "x":11.75, "y":3}, {"label":"?", "x":12.75, "y":3}, {"label":"Shift", "x":13.75, "y":3, "w":1.75}, {"label":"Fn", "x":15.5, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":3.75, "y":4, "w":1.25}, {"x":5, "y":4, "w":2.25}, {"x":7.75, "y":4, "w":2.75}, {"label":"Alt", "x":10.5, "y":4, "w":1.25}, {"label":"Win", "x":12.75, "y":4, "w":1.25}, {"label":"Menu", "x":14, "y":4, "w":1.25}, {"label":"Ctrl", "x":15.25, "y":4, "w":1.25}] diff --git a/keyboards/primekb/meridian_rgb/rules.mk b/keyboards/primekb/meridian_rgb/rules.mk index ee0e024ddb..d307363777 100644 --- a/keyboards/primekb/meridian_rgb/rules.mk +++ b/keyboards/primekb/meridian_rgb/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/primekb/prime_e/config.h b/keyboards/primekb/prime_e/config.h index f1bd0090c7..4baa1963f2 100644 --- a/keyboards/primekb/prime_e/config.h +++ b/keyboards/primekb/prime_e/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 13 /* Keyboard Matrix Assignments */ #define MATRIX_ROW_PINS { E6, C7, B5, B4 } @@ -30,9 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/primekb/prime_e/info.json b/keyboards/primekb/prime_e/info.json index 25f14ee9ce..8046f233e9 100644 --- a/keyboards/primekb/prime_e/info.json +++ b/keyboards/primekb/prime_e/info.json @@ -5,6 +5,8 @@ "usb": { "vid": "0x5052" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [{"x":0,"y":0,"w":1,"h":1}, {"x":1,"y":0,"w":1,"h":1}, {"x":2,"y":0,"w":1,"h":1}, {"x":3,"y":0,"w":1,"h":1}, {"x":4,"y":0,"w":1,"h":1}, {"x":5,"y":0,"w":1,"h":1}, {"x":7,"y":0,"w":1,"h":1}, {"x":8,"y":0,"w":1,"h":1}, {"x":9,"y":0,"w":1,"h":1}, {"x":10,"y":0,"w":1,"h":1}, {"x":11,"y":0,"w":1,"h":1}, {"x":12,"y":0,"w":1,"h":1}, {"x":13,"y":0,"w":1,"h":1}, diff --git a/keyboards/primekb/prime_e/keymaps/brandonschlack/keymap.c b/keyboards/primekb/prime_e/keymaps/brandonschlack/keymap.c index b7fb4dae47..4ff4581235 100644 --- a/keyboards/primekb/prime_e/keymaps/brandonschlack/keymap.c +++ b/keyboards/primekb/prime_e/keymaps/brandonschlack/keymap.c @@ -23,7 +23,7 @@ enum { }; // Tap Dance definitions -qk_tap_dance_action_t tap_dance_actions[] = { +tap_dance_action_t tap_dance_actions[] = { // Tap once for LBracket, twice for RBracket [TD_LR_BRC] = ACTION_TAP_DANCE_DOUBLE(KC_LBRC, KC_RBRC), // Tap once for Single Quote, twice for Double Quote @@ -36,40 +36,40 @@ qk_tap_dance_action_t tap_dance_actions[] = { #define TD_QUOT TD(TD_SD_QUOT) const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_BASE] = LAYOUT( \ - KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, TD_BRC, KC_BSPC, \ - HY_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, TD_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, LWR_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, LOWER, \ - KC_LCTL, KC_LOPT, KC_LCMD, SPC_RAI, SPC_RAI, KC_RCMD, KC_ROPT, KC_RCTL \ + [_BASE] = LAYOUT( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, TD_BRC, KC_BSPC, + HY_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, TD_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, LWR_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, LOWER, + KC_LCTL, KC_LOPT, KC_LCMD, SPC_RAI, SPC_RAI, KC_RCMD, KC_ROPT, KC_RCTL ), - [_LOWER] = LAYOUT( \ - KC_DEL, KC_BRMD, KC_BRMU, MC_MSSN, MC_LHPD, _______, _______, _______, _______, KC_HOME, KC_UP, KC_PGUP, MC_SLPD, \ - _______, KC_MUTE, KC_VOLU, NXT_WIN, PRV_TAB, MC_BACK, MC_FWRD, NXT_TAB, _______, KC_LEFT, KC_RGHT, KC_MPLY, \ - SF_CAPS, KC_MPRV, KC_VOLD, KC_MNXT, _______, PX_AFLL, OP_AFLL, _______, _______, KC_END, KC_DOWN, KC_PGDN, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______ \ + [_LOWER] = LAYOUT( + KC_DEL, KC_BRMD, KC_BRMU, MC_MSSN, MC_LHPD, _______, _______, _______, _______, KC_HOME, KC_UP, KC_PGUP, MC_SLPD, + _______, KC_MUTE, KC_VOLU, NXT_WIN, PRV_TAB, MC_BACK, MC_FWRD, NXT_TAB, _______, KC_LEFT, KC_RGHT, KC_MPLY, + SF_CAPS, KC_MPRV, KC_VOLD, KC_MNXT, _______, PX_AFLL, OP_AFLL, _______, _______, KC_END, KC_DOWN, KC_PGDN, _______, + _______, _______, _______, _______, _______, _______, _______, _______ ), - [_RAISE] = LAYOUT( \ - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_LBRC, KC_RBRC, KC_7, KC_8, KC_9, KC_0, KC_RBRC, _______, \ - _______, KC_F5, KC_F6, KC_F7, KC_F8, KC_MINS, KC_PLUS, KC_4, KC_5, KC_6, KC_SCLN, _______, \ - _______, KC_F9, KC_F10, KC_F11, KC_F12, LWR_EQL, KC_EQL, KC_1, KC_2, KC_3, _______, KC_BSLS, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______ \ + [_RAISE] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_LBRC, KC_RBRC, KC_7, KC_8, KC_9, KC_0, KC_RBRC, _______, + _______, KC_F5, KC_F6, KC_F7, KC_F8, KC_MINS, KC_PLUS, KC_4, KC_5, KC_6, KC_SCLN, _______, + _______, KC_F9, KC_F10, KC_F11, KC_F12, LWR_EQL, KC_EQL, KC_1, KC_2, KC_3, _______, KC_BSLS, _______, + _______, _______, _______, _______, _______, _______, _______, _______ ), - [_ADJUST] = LAYOUT( \ - QM_MAKE, _______, _______, EE_CLR, QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______ \ + [_ADJUST] = LAYOUT( + QM_MAKE, _______, _______, EE_CLR, QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ ) /* - [BLANK] = LAYOUT( \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______ \ + [BLANK] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ ) */ }; diff --git a/keyboards/primekb/prime_e/rgb/config.h b/keyboards/primekb/prime_e/rgb/config.h index 015ba8b5e9..57fbc6182d 100644 --- a/keyboards/primekb/prime_e/rgb/config.h +++ b/keyboards/primekb/prime_e/rgb/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" #define RGB_DI_PIN B7 #define RGBLED_NUM 8 diff --git a/keyboards/primekb/prime_e/rules.mk b/keyboards/primekb/prime_e/rules.mk index 448009e7e6..64b21fa0a2 100644 --- a/keyboards/primekb/prime_e/rules.mk +++ b/keyboards/primekb/prime_e/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/primekb/prime_e/std/config.h b/keyboards/primekb/prime_e/std/config.h deleted file mode 100644 index d6b242e08e..0000000000 --- a/keyboards/primekb/prime_e/std/config.h +++ /dev/null @@ -1,23 +0,0 @@ -/* -Copyright 2019 Holten Campbell - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#include "config_common.h" - -#define BACKLIGHT_PIN B7 -#define BACKLIGHT_LEVELS 5 diff --git a/keyboards/primekb/prime_e/std/info.json b/keyboards/primekb/prime_e/std/info.json index 04f8842546..b6078c9d7a 100644 --- a/keyboards/primekb/prime_e/std/info.json +++ b/keyboards/primekb/prime_e/std/info.json @@ -3,5 +3,9 @@ "usb": { "pid": "0x0051", "device_version": "0.0.1" + }, + "backlight": { + "pin": "B7", + "levels": 5 } } diff --git a/keyboards/primekb/prime_l/config.h b/keyboards/primekb/prime_l/config.h index f6084f3280..f32722311a 100644 --- a/keyboards/primekb/prime_l/config.h +++ b/keyboards/primekb/prime_l/config.h @@ -18,18 +18,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 16 /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/primekb/prime_l/info.json b/keyboards/primekb/prime_l/info.json index 88a2cdb065..b9c5545ca7 100644 --- a/keyboards/primekb/prime_l/info.json +++ b/keyboards/primekb/prime_l/info.json @@ -5,6 +5,8 @@ "usb": { "vid": "0x5052" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"x":15, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2, "w":1.25}, {"x":4.25, "y":2}, {"x":5.25, "y":2}, {"x":6.25, "y":2}, {"x":7.25, "y":2}, {"x":8.25, "y":2}, {"x":9.25, "y":2}, {"x":10.25, "y":2}, {"x":11.25, "y":2}, {"x":12.25, "y":2}, {"x":13.25, "y":2}, {"x":14.25, "y":2, "w":1.75}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3, "w":1.75}, {"x":4.75, "y":3}, {"x":5.75, "y":3}, {"x":6.75, "y":3}, {"x":7.75, "y":3}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3}, {"x":12.75, "y":3}, {"x":13.75, "y":3}, {"x":14.75, "y":3, "w":1.25}, {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4, "w":1.25}, {"x":4.25, "y":4, "w":1.25}, {"x":5.5, "y":4}, {"x":6.5, "y":4}, {"x":7.5, "y":4, "w":2}, {"x":9.5, "y":4, "w":2.25}, {"x":11.75, "y":4}, {"x":12.75, "y":4}, {"x":13.75, "y":4}, {"x":14.75, "y":4, "w":1.25}] diff --git a/keyboards/primekb/prime_l/rules.mk b/keyboards/primekb/prime_l/rules.mk index 6f1af706bf..b94eff9116 100644 --- a/keyboards/primekb/prime_l/rules.mk +++ b/keyboards/primekb/prime_l/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/primekb/prime_l/v1/config.h b/keyboards/primekb/prime_l/v1/config.h index e5a2f04158..553674692a 100644 --- a/keyboards/primekb/prime_l/v1/config.h +++ b/keyboards/primekb/prime_l/v1/config.h @@ -18,12 +18,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* Keyboard Matrix Assignments */ #define MATRIX_ROW_PINS { D1, D0, B7, B3, B2 } #define MATRIX_COL_PINS { D2, D3, D5, D4, D6, D7, B4, B5, C7, C6, F7, F6, F5, F4, F1, F0 } - -#define BACKLIGHT_PIN B6 -/*#define BACKLIGHT_BREATHING*/ -#define BACKLIGHT_LEVELS 4 diff --git a/keyboards/primekb/prime_l/v1/info.json b/keyboards/primekb/prime_l/v1/info.json index 628aa67c10..967939ccbc 100644 --- a/keyboards/primekb/prime_l/v1/info.json +++ b/keyboards/primekb/prime_l/v1/info.json @@ -6,6 +6,10 @@ "pid": "0x504C", "device_version": "0.0.1" }, + "backlight": { + "pin": "B6", + "levels": 4 + }, "layouts": { "LAYOUT": { "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"x":15, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2, "w":1.25}, {"x":4.25, "y":2}, {"x":5.25, "y":2}, {"x":6.25, "y":2}, {"x":7.25, "y":2}, {"x":8.25, "y":2}, {"x":9.25, "y":2}, {"x":10.25, "y":2}, {"x":11.25, "y":2}, {"x":12.25, "y":2}, {"x":13.25, "y":2}, {"x":14.25, "y":2, "w":1.75}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3, "w":1.75}, {"x":4.75, "y":3}, {"x":5.75, "y":3}, {"x":6.75, "y":3}, {"x":7.75, "y":3}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3}, {"x":12.75, "y":3}, {"x":13.75, "y":3}, {"x":14.75, "y":3, "w":1.25}, {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4, "w":1.25}, {"x":4.25, "y":4, "w":1.25}, {"x":5.5, "y":4}, {"x":6.5, "y":4}, {"x":7.5, "y":4, "w":2}, {"x":9.5, "y":4, "w":2.25}, {"x":11.75, "y":4}, {"x":12.75, "y":4}, {"x":13.75, "y":4}, {"x":14.75, "y":4, "w":1.25}] diff --git a/keyboards/primekb/prime_l/v2/config.h b/keyboards/primekb/prime_l/v2/config.h index d479a57f66..c622fe023c 100644 --- a/keyboards/primekb/prime_l/v2/config.h +++ b/keyboards/primekb/prime_l/v2/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 16 /* Keyboard Matrix Assignments */ #define MATRIX_ROW_PINS { E6, B2, B1, B0, B6 } diff --git a/keyboards/primekb/prime_m/config.h b/keyboards/primekb/prime_m/config.h index 3468ea975e..46995b1d31 100644 --- a/keyboards/primekb/prime_m/config.h +++ b/keyboards/primekb/prime_m/config.h @@ -18,11 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 6 /* Keyboard Matrix Assignments */ #define MATRIX_ROW_PINS { C5, B5, B2, D5, D3 } @@ -31,13 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -#define BACKLIGHT_PIN B7 -/*#define BACKLIGHT_BREATHING*/ -#define BACKLIGHT_LEVELS 4 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/primekb/prime_m/info.json b/keyboards/primekb/prime_m/info.json index 06a7d46447..ace8f6b52a 100644 --- a/keyboards/primekb/prime_m/info.json +++ b/keyboards/primekb/prime_m/info.json @@ -8,6 +8,13 @@ "pid": "0x504D", "device_version": "0.0.1" }, + "backlight": { + "pin": "B7", + "levels": 4 + }, + "processor": "atmega32u2", + "bootloader": "atmel-dfu", + "community_layouts": ["numpad_5x6"], "layouts": { "LAYOUT_ortho_5x6": { "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4}, {"x":5, "y":4}] diff --git a/keyboards/primekb/prime_m/rules.mk b/keyboards/primekb/prime_m/rules.mk index 8b38e54330..bdc6e54bc2 100644 --- a/keyboards/primekb/prime_m/rules.mk +++ b/keyboards/primekb/prime_m/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u2 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -16,5 +10,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keybo |