diff options
Diffstat (limited to 'keyboards/primekb/prime_e')
| -rw-r--r-- | keyboards/primekb/prime_e/config.h | 72 | ||||
| -rw-r--r-- | keyboards/primekb/prime_e/info.json | 16 | ||||
| -rw-r--r-- | keyboards/primekb/prime_e/keymaps/default/keymap.c | 74 | ||||
| -rw-r--r-- | keyboards/primekb/prime_e/keymaps/default/readme.md | 2 | ||||
| -rw-r--r-- | keyboards/primekb/prime_e/keymaps/via/keymap.c | 73 | ||||
| -rw-r--r-- | keyboards/primekb/prime_e/keymaps/via/readme.md | 2 | ||||
| -rw-r--r-- | keyboards/primekb/prime_e/keymaps/via/rules.mk | 85 | ||||
| -rw-r--r-- | keyboards/primekb/prime_e/prime_e.c | 22 | ||||
| -rw-r--r-- | keyboards/primekb/prime_e/prime_e.h | 34 | ||||
| -rw-r--r-- | keyboards/primekb/prime_e/readme.md | 16 | ||||
| -rw-r--r-- | keyboards/primekb/prime_e/rules.mk | 80 |
11 files changed, 476 insertions, 0 deletions
diff --git a/keyboards/primekb/prime_e/config.h b/keyboards/primekb/prime_e/config.h new file mode 100644 index 0000000000..331993f4b2 --- /dev/null +++ b/keyboards/primekb/prime_e/config.h @@ -0,0 +1,72 @@ +/* +Copyright 2019 Holten Campbell + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5052 +#define PRODUCT_ID 0x0051 +#define DEVICE_VER 0x0001 +#define MANUFACTURER PrimeKB +#define PRODUCT Prime_E +#define DESCRIPTION Ergo_45 + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 13 + +/* Keyboard Matrix Assignments */ +#define MATRIX_ROW_PINS { E6, C7, B5, B4 } +#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, D6, D4, D5, D3, D2, D1, D0 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ +#define DIODE_DIRECTION COL2ROW + +#define BACKLIGHT_PIN B7 +#define BACKLIGHT_LEVELS 5 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +#define DYNAMIC_KEYMAP_LAYER_COUNT 4 + +// EEPROM usage + +// TODO: refactor with new user EEPROM code (coming soon) +#define EEPROM_MAGIC 0x451F +#define EEPROM_MAGIC_ADDR 32 +// Bump this every time we change what we store +// This will automatically reset the EEPROM with defaults +// and avoid loading invalid data from the EEPROM +#define EEPROM_VERSION 0x08 +#define EEPROM_VERSION_ADDR 34 + +// Dynamic keymap starts after EEPROM version +#define DYNAMIC_KEYMAP_EEPROM_ADDR 35 +// Dynamic macro starts after dynamic keymaps (35+(4*13*4*2)) = (35+416) +#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 451 +#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 573 // 1024-DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR +#define DYNAMIC_KEYMAP_MACRO_COUNT 16 diff --git a/keyboards/primekb/prime_e/info.json b/keyboards/primekb/prime_e/info.json new file mode 100644 index 0000000000..0cca27565c --- /dev/null +++ b/keyboards/primekb/prime_e/info.json @@ -0,0 +1,16 @@ +{ + "keyboard_name": "Prime_E", + "url": "https://www.primekb.com", + "maintainer": "holtenc", + "width": 13, + "height": 4, + "layouts": { + "LAYOUT": { + "layout": [{"x":0,"y":0,"w":1,"h":1}, {"x":1,"y":0,"w":1,"h":1}, {"x":2,"y":0,"w":1,"h":1}, {"x":3,"y":0,"w":1,"h":1}, {"x":4,"y":0,"w":1,"h":1}, {"x":5,"y":0,"w":1,"h":1}, {"x":7,"y":0,"w":1,"h":1}, {"x":8,"y":0,"w":1,"h":1}, {"x":9,"y":0,"w":1,"h":1}, {"x":10,"y":0,"w":1,"h":1}, {"x":11,"y":0,"w":1,"h":1}, {"x":12,"y":0,"w":1,"h":1}, {"x":13,"y":0,"w":1,"h":1}, + {"x":0,"y":1,"w":1.25,"h":1}, {"x":1.25,"y":1,"w":1,"h":1}, {"x":2.25,"y":1,"w":1,"h":1}, {"x":3.25,"y":1,"w":1,"h":1}, {"x":4.25,"y":1,"w":1,"h":1}, {"x":5.25,"y":1,"w":1,"h":1}, {"x":7.25,"y":1,"w":1,"h":1}, {"x":8.25,"y":1,"w":1,"h":1}, {"x":9.25,"y":1,"w":1,"h":1}, {"x":10.25,"y":1,"w":1,"h":1}, {"x":11.25,"y":1,"w":1,"h":1}, {"x":12.25,"y":1,"w":1.75,"h":1}, + {"x":0,"y":2,"w":1.75,"h":1}, {"x":1.75,"y":2,"w":1,"h":1}, {"x":2.75,"y":2,"w":1,"h":1}, {"x":3.75,"y":2,"w":1,"h":1}, {"x":4.75,"y":2,"w":1,"h":1}, {"x":5.75,"y":2,"w":1,"h":1}, {"x":6.75,"y":2,"w":1,"h":1}, {"x":7.75,"y":2,"w":1,"h":1}, {"x":8.75,"y":2,"w":1,"h":1}, {"x":9.75,"y":2,"w":1,"h":1}, {"x":10.75,"y":2,"w":1,"h":1}, {"x":11.75,"y":2,"w":1,"h":1}, {"x":12.75,"y":2,"w":1.25,"h":1}, + {"x":0,"y":3,"w":1.25,"h":1}, {"x":1.25,"y":3,"w":1.25,"h":1}, {"x":3.5,"y":3,"w":1.25,"h":1}, {"x":4.75,"y":3,"w":2,"h":1}, {"x":6.75,"y":3,"w":2.25,"h":1}, {"x":9,"y":3,"w":1.25,"h":1}, {"x":11.5,"y":3,"w":1.25,"h":1}, {"x":12.75,"y":3,"w":1.25,"h":1} + ] + } + } +} diff --git a/keyboards/primekb/prime_e/keymaps/default/keymap.c b/keyboards/primekb/prime_e/keymaps/default/keymap.c new file mode 100644 index 0000000000..47692c5413 --- /dev/null +++ b/keyboards/primekb/prime_e/keymaps/default/keymap.c @@ -0,0 +1,74 @@ +/* Copyright 2018 Holten Campbell + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + LAYOUT( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, MO(1), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, + KC_LCTL, KC_LALT, KC_RBRC, MO(1), KC_SPC, KC_MINS, KC_LGUI, TO(1) + ) + +}; + +void matrix_init_user(void) { + // set CapsLock LED to output and low + setPinOutput(B1); + writePinHigh(B1); + // set NumLock LED to output and low + setPinOutput(B2); + writePinHigh(B2); + // set ScrollLock LED to output and low + setPinOutput(B3); + writePinHigh(B3); +} + +void matrix_scan_user(void) { + +} + + +void led_set_user(uint8_t usb_led) { + if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) { + writePinLow(B2); + } else { + writePinHigh(B2); + } + if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { + writePinLow(B1); + } else { + writePinHigh(B1); + } +/* + if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) { + writePinLow(B3); + } else { + writePinHigh(B3); + }*/ + +} + +//function for layer indicator LED +uint32_t layer_state_set_user(uint32_t state) +{ + if (biton32(state) == 1) { + writePinLow(B3); + } else { + writePinHigh(B3); + } + return state; +} diff --git a/keyboards/primekb/prime_e/keymaps/default/readme.md b/keyboards/primekb/prime_e/keymaps/default/readme.md new file mode 100644 index 0000000000..5266526eec --- /dev/null +++ b/keyboards/primekb/prime_e/keymaps/default/readme.md @@ -0,0 +1,2 @@ +# The default keymap for Prime_E +This is the default keymap for Prime_E.
\ No newline at end of file diff --git a/keyboards/primekb/prime_e/keymaps/via/keymap.c b/keyboards/primekb/prime_e/keymaps/via/keymap.c new file mode 100644 index 0000000000..9cc3e2f3d7 --- /dev/null +++ b/keyboards/primekb/prime_e/keymaps/via/keymap.c @@ -0,0 +1,73 @@ +/* Copyright 2018 Holten Campbell + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + LAYOUT( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, MO(1), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, + KC_LCTL, KC_LALT, KC_RBRC, MO(1), KC_SPC, KC_MINS, KC_LGUI, TO(1) + ) +}; + +void matrix_init_user(void) { + // set CapsLock LED to output and low + setPinOutput(B1); + writePinHigh(B1); + // set NumLock LED to output and low + setPinOutput(B2); + writePinHigh(B2); + // set ScrollLock LED to output and low + setPinOutput(B3); + writePinHigh(B3); +} + +void matrix_scan_user(void) { + +} + + +void led_set_user(uint8_t usb_led) { + if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) { + writePinLow(B2); + } else { + writePinHigh(B2); + } + if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { + writePinLow(B1); + } else { + writePinHigh(B1); + } +/* + if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) { + writePinLow(B3); + } else { + writePinHigh(B3); + }*/ + +} + +//function for layer indicator LED +uint32_t layer_state_set_user(uint32_t state) +{ + if (biton32(state) == 1) { + writePinLow(B3); + } else { + writePinHigh(B3); + } + return state; +} diff --git a/keyboards/primekb/prime_e/keymaps/via/readme.md b/keyboards/primekb/prime_e/keymaps/via/readme.md new file mode 100644 index 0000000000..bbd56c0cc7 --- /dev/null +++ b/keyboards/primekb/prime_e/keymaps/via/readme.md @@ -0,0 +1,2 @@ +# The VIA keymap for Prime_E +This keymap is for compatibility with the VIA configurator.
\ No newline at end of file diff --git a/keyboards/primekb/prime_e/keymaps/via/rules.mk b/keyboards/primekb/prime_e/keymaps/via/rules.mk new file mode 100644 index 0000000000..93b2e70e7c --- /dev/null +++ b/keyboards/primekb/prime_e/keymaps/via/rules.mk @@ -0,0 +1,85 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = atmel-dfu + + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) + +# This is the VIA magic +RAW_ENABLE = yes +DYNAMIC_KEYMAP_ENABLE = yes +SRC += keyboards/wilba_tech/wt_main.c
\ No newline at end of file diff --git a/keyboards/primekb/prime_e/prime_e.c b/keyboards/primekb/prime_e/prime_e.c new file mode 100644 index 0000000000..bd51ce0087 --- /dev/null +++ b/keyboards/primekb/prime_e/prime_e.c @@ -0,0 +1,22 @@ +/* Copyright 2019 Holten Campbell + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "prime_e.h" + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/primekb/prime_e/prime_e.h b/keyboards/primekb/prime_e/prime_e.h new file mode 100644 index 0000000000..4af70fbe17 --- /dev/null +++ b/keyboards/primekb/prime_e/prime_e.h @@ -0,0 +1,34 @@ +/* Copyright 2019 Holten Campbell + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + +#pragma once + +#include "quantum.h" + + +#define LAYOUT( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K112, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, \ + K300, K301, K303, K304, K306, K308, K311, K312 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, KC_NO, K112 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212 }, \ + { K300, K301, KC_NO, K303, K304, KC_NO, K306, KC_NO, K308, KC_NO, KC_NO, K311, K312 } \ +} + diff --git a/keyboards/primekb/prime_e/readme.md b/keyboards/primekb/prime_e/readme.md new file mode 100644 index 0000000000..6abe0bed01 --- /dev/null +++ b/keyboards/primekb/prime_e/readme.md @@ -0,0 +1,16 @@ +# Prime_E + + + +An ergonomic 45%. + +Keyboard Maintainer: [Holtenc](https://github.com/holtenc/) +Hardware Supported: Prime_E PCB, ATMega32u4 +Hardware Availability: Group Buy, Retail + +Make example for this keyboard (after setting up your build environment): + + make prime_e:default + make prime_e:via (when using VIA configurator) + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/primekb/prime_e/rules.mk b/keyboards/primekb/prime_e/rules.mk new file mode 100644 index 0000000000..313bf3b3ec --- /dev/null +++ b/keyboards/primekb/prime_e/rules.mk @@ -0,0 +1,80 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = atmel-dfu + + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
\ No newline at end of file |