diff options
Diffstat (limited to 'keyboards/ploopyco')
28 files changed, 97 insertions, 177 deletions
diff --git a/keyboards/ploopyco/mouse/config.h b/keyboards/ploopyco/mouse/config.h index 6a6713557b..c7fcc504e3 100644 --- a/keyboards/ploopyco/mouse/config.h +++ b/keyboards/ploopyco/mouse/config.h @@ -18,49 +18,18 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 8 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define DIRECT_PINS \ - { \ - { D4, D2, E6, B6, D7, C6, C7, B7 } \ - } - // These pins are not broken out, and cannot be used normally. // They are set as output and pulled high, by default #define UNUSABLE_PINS \ { B4, D6, F1, F5, F6, F7 } -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - #define USB_MAX_POWER_CONSUMPTION 100 -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* disable action features */ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 3 - #define RGB_DI_PIN B5 #define RGBLED_NUM 4 #define RGBLIGHT_LIMIT_VAL 40 diff --git a/keyboards/ploopyco/mouse/info.json b/keyboards/ploopyco/mouse/info.json index f672336c25..522f996ef8 100644 --- a/keyboards/ploopyco/mouse/info.json +++ b/keyboards/ploopyco/mouse/info.json @@ -8,6 +8,16 @@ "pid": "0x4D6F", "device_version": "0.0.1" }, + "bootmagic": { + "matrix": [0, 3] + }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", + "matrix_pins": { + "direct": [ + ["D4", "D2", "E6", "B6", "D7", "C6", "C7", "B7"] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/ploopyco/mouse/rules.mk b/keyboards/ploopyco/mouse/rules.mk index 840b5eba39..8d62f78ed7 100644 --- a/keyboards/ploopyco/mouse/rules.mk +++ b/keyboards/ploopyco/mouse/rules.mk @@ -1,12 +1,6 @@ -# MCU name -MCU = atmega32u4 - # Processor frequency F_CPU = 8000000 -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/ploopyco/trackball/config.h b/keyboards/ploopyco/trackball/config.h index 54a301b0d2..de94eab9ba 100644 --- a/keyboards/ploopyco/trackball/config.h +++ b/keyboards/ploopyco/trackball/config.h @@ -18,19 +18,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 5 - - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* disable action features */ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING @@ -38,10 +25,6 @@ #define USB_MAX_POWER_CONSUMPTION 100 -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 3 - #define ROTATIONAL_TRANSFORM_ANGLE 20 // If board has a debug LED, you can enable it by defining this diff --git a/keyboards/ploopyco/trackball/info.json b/keyboards/ploopyco/trackball/info.json index feb458e1c5..4d5fb44fac 100644 --- a/keyboards/ploopyco/trackball/info.json +++ b/keyboards/ploopyco/trackball/info.json @@ -8,6 +8,9 @@ "pid": "0x5442", "device_version": "0.0.1" }, + "bootmagic": { + "matrix": [0, 3] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/ploopyco/trackball/rev1/config.h b/keyboards/ploopyco/trackball/rev1/config.h index 3db085baf2..35ab215341 100644 --- a/keyboards/ploopyco/trackball/rev1/config.h +++ b/keyboards/ploopyco/trackball/rev1/config.h @@ -18,21 +18,6 @@ #pragma once -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define DIRECT_PINS \ - { \ - { D4, D2, E6, B5, D7 } \ - } - // These pins are not broken out, and cannot be used normally. // They are set as output and pulled high, by default #define UNUSABLE_PINS \ diff --git a/keyboards/ploopyco/trackball/rev1/info.json b/keyboards/ploopyco/trackball/rev1/info.json new file mode 100644 index 0000000000..8e372e7c2b --- /dev/null +++ b/keyboards/ploopyco/trackball/rev1/info.json @@ -0,0 +1,9 @@ +{ + "processor": "atmega32u4", + "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["D4", "D2", "E6", "B5", "D7"] + ] + } +} diff --git a/keyboards/ploopyco/trackball/rev1/rules.mk b/keyboards/ploopyco/trackball/rev1/rules.mk index 6ded83e74b..e69de29bb2 100644 --- a/keyboards/ploopyco/trackball/rev1/rules.mk +++ b/keyboards/ploopyco/trackball/rev1/rules.mk @@ -1,2 +0,0 @@ -# Bootloader selection -BOOTLOADER = caterina diff --git a/keyboards/ploopyco/trackball/rev1_005/config.h b/keyboards/ploopyco/trackball/rev1_005/config.h index 321e3004d1..fcf51c4c1b 100644 --- a/keyboards/ploopyco/trackball/rev1_005/config.h +++ b/keyboards/ploopyco/trackball/rev1_005/config.h @@ -18,21 +18,6 @@ #pragma once -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define DIRECT_PINS \ - { \ - { D4, D2, E6, B6, D7 } \ - } - // These pins are not broken out, and cannot be used normally. // They are set as output and pulled high, by default #define UNUSABLE_PINS \ diff --git a/keyboards/ploopyco/trackball/rev1_005/info.json b/keyboards/ploopyco/trackball/rev1_005/info.json new file mode 100644 index 0000000000..b963f8842a --- /dev/null +++ b/keyboards/ploopyco/trackball/rev1_005/info.json @@ -0,0 +1,9 @@ +{ + "processor": "atmega32u4", + "bootloader": "atmel-dfu", + "matrix_pins": { + "direct": [ + ["D4", "D2", "E6", "B6", "D7"] + ] + } +} diff --git a/keyboards/ploopyco/trackball/rev1_005/rules.mk b/keyboards/ploopyco/trackball/rev1_005/rules.mk index bddd4e389e..e69de29bb2 100644 --- a/keyboards/ploopyco/trackball/rev1_005/rules.mk +++ b/keyboards/ploopyco/trackball/rev1_005/rules.mk @@ -1,2 +0,0 @@ -# Bootloader selection -BOOTLOADER = atmel-dfu diff --git a/keyboards/ploopyco/trackball/rules.mk b/keyboards/ploopyco/trackball/rules.mk index 3d5c364e3e..0f5f3f648f 100644 --- a/keyboards/ploopyco/trackball/rules.mk +++ b/keyboards/ploopyco/trackball/rules.mk @@ -1,6 +1,3 @@ -# MCU name -MCU = atmega32u4 - # Processor frequency F_CPU = 8000000 diff --git a/keyboards/ploopyco/trackball_mini/config.h b/keyboards/ploopyco/trackball_mini/config.h index bf7570f364..2cb236fcd0 100644 --- a/keyboards/ploopyco/trackball_mini/config.h +++ b/keyboards/ploopyco/trackball_mini/config.h @@ -19,19 +19,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 5 - - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* disable action features */ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING @@ -39,10 +26,6 @@ #define USB_MAX_POWER_CONSUMPTION 100 -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 3 - // If board has a debug LED, you can enable it by defining this // #define DEBUG_LED_PIN F7 diff --git a/keyboards/ploopyco/trackball_mini/info.json b/keyboards/ploopyco/trackball_mini/info.json index f465a7a21e..1c8ed6351a 100644 --- a/keyboards/ploopyco/trackball_mini/info.json +++ b/keyboards/ploopyco/trackball_mini/info.json @@ -8,6 +8,11 @@ "pid": "0x1EAB", "device_version": "0.0.1" }, + "bootmagic": { + "matrix": [0, 3] + }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/ploopyco/trackball_mini/rev1_001/config.h b/keyboards/ploopyco/trackball_mini/rev1_001/config.h index d4c9d23bec..485f8e3485 100644 --- a/keyboards/ploopyco/trackball_mini/rev1_001/config.h +++ b/keyboards/ploopyco/trackball_mini/rev1_001/config.h @@ -19,21 +19,6 @@ #pragma once -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define DIRECT_PINS \ - { \ - { D4, D2, E6, B6, D7 } \ - } - // These pins are not broken out, and cannot be used normally. // They are set as output and pulled high, by default #define UNUSABLE_PINS \ diff --git a/keyboards/ploopyco/trackball_mini/rev1_001/info.json b/keyboards/ploopyco/trackball_mini/rev1_001/info.json new file mode 100644 index 0000000000..20c192f869 --- /dev/null +++ b/keyboards/ploopyco/trackball_mini/rev1_001/info.json @@ -0,0 +1,7 @@ +{ + "matrix_pins": { + "direct": [ + ["D4", "D2", "E6", "B6", "D7"] + ] + } +} diff --git a/keyboards/ploopyco/trackball_mini/rev1_002/config.h b/keyboards/ploopyco/trackball_mini/rev1_002/config.h index d4c9d23bec..485f8e3485 100644 --- a/keyboards/ploopyco/trackball_mini/rev1_002/config.h +++ b/keyboards/ploopyco/trackball_mini/rev1_002/config.h @@ -19,21 +19,6 @@ #pragma once -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define DIRECT_PINS \ - { \ - { D4, D2, E6, B6, D7 } \ - } - // These pins are not broken out, and cannot be used normally. // They are set as output and pulled high, by default #define UNUSABLE_PINS \ diff --git a/keyboards/ploopyco/trackball_mini/rev1_002/info.json b/keyboards/ploopyco/trackball_mini/rev1_002/info.json new file mode 100644 index 0000000000..20c192f869 --- /dev/null +++ b/keyboards/ploopyco/trackball_mini/rev1_002/info.json @@ -0,0 +1,7 @@ +{ + "matrix_pins": { + "direct": [ + ["D4", "D2", "E6", "B6", "D7"] + ] + } +} diff --git a/keyboards/ploopyco/trackball_mini/rules.mk b/keyboards/ploopyco/trackball_mini/rules.mk index f5e7935ee2..d7016929c9 100644 --- a/keyboards/ploopyco/trackball_mini/rules.mk +++ b/keyboards/ploopyco/trackball_mini/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/ploopyco/trackball_nano/config.h b/keyboards/ploopyco/trackball_nano/config.h index fb340a4ec3..c8e74cc271 100644 --- a/keyboards/ploopyco/trackball_nano/config.h +++ b/keyboards/ploopyco/trackball_nano/config.h @@ -19,15 +19,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 1 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 0 - /* disable action features */ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING diff --git a/keyboards/ploopyco/trackball_nano/info.json b/keyboards/ploopyco/trackball_nano/info.json index cf9b78a4f3..610efd27b3 100644 --- a/keyboards/ploopyco/trackball_nano/info.json +++ b/keyboards/ploopyco/trackball_nano/info.json @@ -8,6 +8,9 @@ "pid": "0x54A3", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", + "debounce": 0, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/ploopyco/trackball_nano/rev1_001/config.h b/keyboards/ploopyco/trackball_nano/rev1_001/config.h index 3bde88487a..14fcb8ca95 100644 --- a/keyboards/ploopyco/trackball_nano/rev1_001/config.h +++ b/keyboards/ploopyco/trackball_nano/rev1_001/config.h @@ -19,18 +19,6 @@ #pragma once -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define DIRECT_PINS {{NO_PIN}} - // These pins are not broken out, and cannot be used normally. // They are set as output and pulled high, by default #define UNUSABLE_PINS \ diff --git a/keyboards/ploopyco/trackball_nano/rev1_001/info.json b/keyboards/ploopyco/trackball_nano/rev1_001/info.json new file mode 100644 index 0000000000..abf5f9fe74 --- /dev/null +++ b/keyboards/ploopyco/trackball_nano/rev1_001/info.json @@ -0,0 +1,7 @@ +{ + "matrix_pins": { + "direct": [ + [null] + ] + } +} diff --git a/keyboards/ploopyco/trackball_nano/rules.mk b/keyboards/ploopyco/trackball_nano/rules.mk index 565be1280f..7a1052a4fa 100644 --- a/keyboards/ploopyco/trackball_nano/rules.mk +++ b/keyboards/ploopyco/trackball_nano/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/ploopyco/trackball_thumb/config.h b/keyboards/ploopyco/trackball_thumb/config.h index 97553a7959..8fc084c38c 100644 --- a/keyboards/ploopyco/trackball_thumb/config.h +++ b/keyboards/ploopyco/trackball_thumb/config.h @@ -18,11 +18,6 @@ #pragma once -#include "config_common.h" - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* disable action features */ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING diff --git a/keyboards/ploopyco/trackball_thumb/info.json b/keyboards/ploopyco/trackball_thumb/info.json index b76e2bd7fe..3cf2d0ca37 100644 --- a/keyboards/ploopyco/trackball_thumb/info.json +++ b/keyboards/ploopyco/trackball_thumb/info.json @@ -20,7 +20,6 @@ "pointing_device": true, "encoder": false }, - "debounce": 5, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/ploopyco/trackball_thumb/rev1_001/config.h b/keyboards/ploopyco/trackball_thumb/rev1_001/config.h new file mode 100644 index 0000000000..a648e8e8e4 --- /dev/null +++ b/keyboards/ploopyco/trackball_thumb/rev1_001/config.h @@ -0,0 +1,24 @@ +/* Copyright 2021 Colin Lam (Ploopy Corporation) + * Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com> + * Copyright 2019 Sunjun Kim + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +// These pins are not broken out, and cannot be used normally. +// They are set as output and pulled high, by default +#define UNUSABLE_PINS \ + { D1, D3, B4, B7, D6, C7, F6, F5, F3, F7 } diff --git a/keyboards/ploopyco/trackball_thumb/trackball_thumb.c b/keyboards/ploopyco/trackball_thumb/trackball_thumb.c index 4a90ced8eb..bbc782da45 100644 --- a/keyboards/ploopyco/trackball_thumb/trackball_thumb.c +++ b/keyboards/ploopyco/trackball_thumb/trackball_thumb.c @@ -188,6 +188,19 @@ void keyboard_pre_init_kb(void) { setPinInput(OPT_ENC1); setPinInput(OPT_ENC2); + /* Ground all output pins connected to ground. This provides additional + * pathways to ground. If you're messing with this, know this: driving ANY + * of these pins high will cause a short. On the MCU. Ka-blooey. + */ +#ifdef UNUSABLE_PINS + const pin_t unused_pins[] = UNUSABLE_PINS; + + for (uint8_t i = 0; i < (sizeof(unused_pins) / sizeof(pin_t)); i++) { + setPinOutput(unused_pins[i]); + writePinLow(unused_pins[i]); + } +#endif + // This is the debug LED. #if defined(DEBUG_LED_PIN) setPinOutput(DEBUG_LED_PIN); |