3 files changed, 10 insertions, 37 deletions
diff --git a/keyboards/ploopyco/mouse/config.h b/keyboards/ploopyco/mouse/config.h
index 6a6713557b..c7fcc504e3 100644
--- a/keyboards/ploopyco/mouse/config.h
+++ b/keyboards/ploopyco/mouse/config.h
@@ -18,49 +18,18 @@
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 1
-#define MATRIX_COLS 8
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define DIRECT_PINS                        \
-    {                                      \
-        { D4, D2, E6, B6, D7, C6, C7, B7 } \
-    }
-
 // These pins are not broken out, and cannot be used normally.
 // They are set as output and pulled high, by default
 #define UNUSABLE_PINS \
     { B4, D6, F1, F5, F6, F7 }
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 #define USB_MAX_POWER_CONSUMPTION 100
 
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* disable action features */
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
 
-/* Bootmagic Lite key configuration */
-#define BOOTMAGIC_LITE_ROW 0
-#define BOOTMAGIC_LITE_COLUMN 3
-
 #define RGB_DI_PIN B5
 #define RGBLED_NUM 4
 #define RGBLIGHT_LIMIT_VAL 40
diff --git a/keyboards/ploopyco/mouse/info.json b/keyboards/ploopyco/mouse/info.json
index f672336c25..522f996ef8 100644
--- a/keyboards/ploopyco/mouse/info.json
+++ b/keyboards/ploopyco/mouse/info.json
@@ -8,6 +8,16 @@
         "pid": "0x4D6F",
         "device_version": "0.0.1"
     },
+    "bootmagic": {
+        "matrix": [0, 3]
+    },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
+    "matrix_pins": {
+        "direct": [
+            ["D4", "D2", "E6", "B6", "D7", "C6", "C7", "B7"]
+        ]
+    },
     "layouts": {
         "LAYOUT": {
             "layout": [
diff --git a/keyboards/ploopyco/mouse/rules.mk b/keyboards/ploopyco/mouse/rules.mk
index 840b5eba39..8d62f78ed7 100644
--- a/keyboards/ploopyco/mouse/rules.mk
+++ b/keyboards/ploopyco/mouse/rules.mk
@@ -1,12 +1,6 @@
-# MCU name
-MCU = atmega32u4
-
 # Processor frequency
 F_CPU = 8000000
 
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #