diff options
Diffstat (limited to 'keyboards/planck/rev6_drop/config.h')
| -rw-r--r-- | keyboards/planck/rev6_drop/config.h | 128 |
1 files changed, 128 insertions, 0 deletions
diff --git a/keyboards/planck/rev6_drop/config.h b/keyboards/planck/rev6_drop/config.h new file mode 100644 index 0000000000..c1baa34b72 --- /dev/null +++ b/keyboards/planck/rev6_drop/config.h @@ -0,0 +1,128 @@ +/* + * Copyright 2018 Jack Humbert <jack.humb@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +/* USB Device descriptor parameter */ +#define PRODUCT_ID 0xA4F9 +#define DEVICE_VER 0x0006 +#undef MANUFACTURER +#define MANUFACTURER Drop + +#undef MATRIX_ROWS +#undef MATRIX_COLS +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 6 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +/* Note: These are not used for arm boards. They're here purely as documentation. */ +#undef MATRIX_ROW_PINS +#undef MATRIX_COL_PINS + +#define MATRIX_ROW_PINS \ + { A10, A9, A8, B15, C13, C14, C15, A2 } +#define MATRIX_COL_PINS \ + { B11, B10, B2, B1, A7, B0 } + +#define UNUSED_PINS + +#define ENCODERS_PAD_A \ + { B12 } +#define ENCODERS_PAD_B \ + { B13 } + +#define DIP_SWITCH_PINS \ + { B14, A15, A0, B9 } + +#define MUSIC_MAP +#undef AUDIO_VOICES +#undef AUDIO_PIN +#define AUDIO_PIN A5 +#define AUDIO_PIN_ALT A4 +#define AUDIO_PIN_ALT_AS_NEGATIVE + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +// #define DEBOUNCE 6 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * WS2812 Underglow Matrix options + */ +#define RGB_DI_PIN A1 +#define RGBLED_NUM 9 +#define DRIVER_LED_TOTAL RGBLED_NUM + +#define WS2812_PWM_DRIVER PWMD2 +#define WS2812_PWM_CHANNEL 2 +#define WS2812_PWM_PAL_MODE 1 +#define WS2812_DMA_STREAM STM32_DMA1_STREAM2 +#define WS2812_DMA_CHANNEL 2 + +#define RGB_DISABLE_WHEN_USB_SUSPENDED |