diff options
Diffstat (limited to 'keyboards/panc60/readme.md')
| -rw-r--r-- | keyboards/panc60/readme.md | 43 |
1 files changed, 8 insertions, 35 deletions
diff --git a/keyboards/panc60/readme.md b/keyboards/panc60/readme.md index 3312a07ce7..52dcc4ccea 100644 --- a/keyboards/panc60/readme.md +++ b/keyboards/panc60/readme.md @@ -4,45 +4,18 @@ The panc60 is a 60% PCB with backlight and rgb underglow. -Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin), [Jack Humbert](https://github.com/jackhumbert) -Hardware Supported: panc60 PCB -Hardware Availability: [PANC Interactive](https://store.panc.co/product/panc60-60-pcb) +* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin), [Jack Humbert](https://github.com/jackhumbert) +* Hardware Supported: panc60 PCB +* Hardware Availability: [PANC Interactive](https://store.panc.co/product/panc60-60-pcb) Make example for this keyboard (after setting up your build environment): make panc60:default -Flashing - -**Reset Key:** Hold down the key located at `K40`, commonly programmed as left control while plugging in the keyboard. - -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. - -To put the panc60 into reset, hold left control while plugging in. - -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python3 - pip3 install pyusb - brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) + + make panc60:default:flash + +**Reset Key**: Hold down the key located at *K40*, commonly programmed as *left control* while plugging in the keyboard. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |