3 files changed, 1 insertions, 35 deletions
diff --git a/keyboards/mt/mt40/config.h b/keyboards/mt/mt40/config.h
index 8cc9f7efcc..811854bdc0 100644
--- a/keyboards/mt/mt40/config.h
+++ b/keyboards/mt/mt40/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 7
@@ -59,46 +58,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define BACKLIGHT_PIN D2
 
-/* number of backlight levels */
 #define BACKLIGHT_LEVELS 3
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-/* #define DEBOUNCE 5 */
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 /* #define LOCKING_SUPPORT_ENABLE */
 /* Locking resynchronize hack */
 /* #define LOCKING_RESYNC_ENABLE */
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
diff --git a/keyboards/mt/mt40/info.json b/keyboards/mt/mt40/info.json
index 3f3c1fc374..999c3b075d 100644
--- a/keyboards/mt/mt40/info.json
+++ b/keyboards/mt/mt40/info.json
@@ -8,6 +8,7 @@
     "pid": "0x422D",
     "device_version": "0.0.1"
   },
+  "community_layouts": ["planck_mit"],
   "layouts": {
     "LAYOUT_planck_mit": {
       "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3, "w":2}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}]
diff --git a/keyboards/mt/mt40/rules.mk b/keyboards/mt/mt40/rules.mk
index 3024f40149..1046811e2f 100644
--- a/keyboards/mt/mt40/rules.mk
+++ b/keyboards/mt/mt40/rules.mk
@@ -18,5 +18,4 @@ AUDIO_ENABLE = no      # Audio output
 RGBLIGHT_ENABLE = yes  # Enable WS2812 RGB underlight. 
 WS2812_DRIVER = i2c
 
-LAYOUTS = planck_mit
 LAYOUTS_HAS_RGB = no