1 files changed, 103 insertions, 0 deletions
diff --git a/keyboards/moonlander/config.h b/keyboards/moonlander/config.h
new file mode 100644
index 0000000000..b77fcbd1e0
--- /dev/null
+++ b/keyboards/moonlander/config.h
@@ -0,0 +1,103 @@
+/* Copyright 2020 ZSA Technology Labs, Inc <@zsa>
+ * Copyright 2020 Jack Humbert <jack.humb@gmail.com>
+ * Copyright 2020 Drashna Jael're  <drashna@live.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+// clang-format off
+#define VENDOR_ID       0x3297
+#define PRODUCT_ID      0x1969
+#define MANUFACTURER    ZSA Technology Labs
+#define PRODUCT         Moonlander Mark I
+#define DEVICE_VER      0x0001
+#define WEBUSB_LANDING_PAGE_URL u8"configure.ergodox-ez.com"
+
+// clang-format on
+
+/* key matrix size */
+#define MATRIX_ROWS 12
+#define MATRIX_COLS 7
+
+/*  PCB default pin-out */
+// #define MATRIX_ROW_PINS { B10, B11, B12, B13, B14, B15 }
+// #define MATRIX_COL_PINS { A0, A1, A2, A3, A6, A7, B0 }
+
+// #define MCP23_ROW_PINS { GPB5, GBP4, GBP3, GBP2, GBP1, GBP0 }
+// #define MCP23_COL_PINS { GPA0, GBA1, GBA2, GBA3, GBA4, GBA5, GBA6 }
+
+// #define MCP23_LED_R GPB7
+// #define MCP23_LED_G GPB6
+// #define MCP23_LED_B GPA7
+
+#define EEPROM_I2C_24LC128
+
+// Not needed, is default address:
+// #define EXTERNAL_EEPROM_I2C_BASE_ADDRESS 0b10100000
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION ROW2COL
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+#define DRIVER_ADDR_1 0b1110100
+#define DRIVER_ADDR_2 0b1110111
+
+#define DRIVER_COUNT 2
+#define DRIVER_1_LED_TOTAL 36
+#define DRIVER_2_LED_TOTAL 36
+#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
+#define RGB_MATRIX_CENTER { 125, 26 }
+#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 175
+#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#define RGB_MATRIX_KEYPRESSES
+#define RGB_DISABLE_WHEN_USB_SUSPENDED true
+
+#define MUSIC_MAP
+
+#define FIRMWARE_VERSION_SIZE 17
+#define DYNAMIC_KEYMAP_EEPROM_ADDR (EECONFIG_SIZE + FIRMWARE_VERSION_SIZE)
+#ifdef EEPROM_I2C
+#    define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 16383
+#    define DYNAMIC_KEYMAP_LAYER_COUNT 32
+#endif