diff options
Diffstat (limited to 'keyboards/mlego/m60/rev1')
| -rw-r--r-- | keyboards/mlego/m60/rev1/config.h | 25 | ||||
| -rw-r--r-- | keyboards/mlego/m60/rev1/ld/STM32F401xE.ld | 88 | ||||
| -rw-r--r-- | keyboards/mlego/m60/rev1/rules.mk | 5 |
3 files changed, 106 insertions, 12 deletions
diff --git a/keyboards/mlego/m60/rev1/config.h b/keyboards/mlego/m60/rev1/config.h index c05f30813a..437e605149 100644 --- a/keyboards/mlego/m60/rev1/config.h +++ b/keyboards/mlego/m60/rev1/config.h @@ -18,9 +18,14 @@ #include "config_common.h" /* USB Device descriptor parameter */ -#define PRODUCT_ID 0x0001 +#define PRODUCT_ID 0x6161 #define DEVICE_VER 0x0001 +#define LED_NUM_LOCK_PIN B12 +#define LED_SCROLL_LOCK_PIN B13 +#define LED_CAPS_LOCK_PIN C13 + +#ifdef ENCODER_ENABLE #define MATRIX_ROW_PINS \ { A6, A7, B0, B1, B10 } #define MATRIX_COL_PINS \ @@ -31,20 +36,13 @@ #define ENCODERS_PAD_B \ { B8 } -#define LED_NUM_LOCK_PIN B12 -#define LED_SCROLL_LOCK_PIN B13 -#define LED_CAPS_LOCK_PIN C13 +#endif -#define RGB_DI_PIN B15 +#ifdef RGBLIGHT_ENABLE -#define UNUSED_PINS +#define RGB_DI_PIN B15 #define RGBLIGHT_LAYERS -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -#define MATRIX_IO_DELAY 5 - #define RGBLED_NUM 20 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD @@ -56,3 +54,8 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE +#endif + +#define UNUSED_PINS +// you want to comment this if using stm32-dfu as bootloader +#define FEE_PAGE_BASE_ADDRESS 0x08008000 diff --git a/keyboards/mlego/m60/rev1/ld/STM32F401xE.ld b/keyboards/mlego/m60/rev1/ld/STM32F401xE.ld new file mode 100644 index 0000000000..daec7d8583 --- /dev/null +++ b/keyboards/mlego/m60/rev1/ld/STM32F401xE.ld @@ -0,0 +1,88 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F401xE memory setup. + */ +MEMORY +{ + flash0 (rx) : org = 0x08000000, len = 16k /* tinyuf2 bootloader requires app to be located at 64k offset for this MCU */ + flash1 (rx) : org = 0x08004000, len = 16k + flash2 (rx) : org = 0x08008000, len = 16k /* emulated eeprom */ + flash3 (rx) : org = 0x0800C000, len = 16k + flash4 (rx) : org = 0x08010000, len = 512k - 64k + flash5 (rx) : org = 0x00000000, len = 0 + flash6 (rx) : org = 0x00000000, len = 0 + flash7 (rx) : org = 0x00000000, len = 0 + ram0 (wx) : org = 0x20000000, len = 96k + ram1 (wx) : org = 0x00000000, len = 0 + ram2 (wx) : org = 0x00000000, len = 0 + ram3 (wx) : org = 0x00000000, len = 0 + ram4 (wx) : org = 0x00000000, len = 0 + ram5 (wx) : org = 0x00000000, len = 0 + ram6 (wx) : org = 0x00000000, len = 0 + ram7 (wx) : org = 0x00000000, len = 0 +} + +/* For each data/text section two region are defined, a virtual region + and a load region (_LMA suffix).*/ + +/* Flash region to be used for exception vectors.*/ +REGION_ALIAS("VECTORS_FLASH", flash4); +REGION_ALIAS("VECTORS_FLASH_LMA", flash4); + +/* Flash region to be used for constructors and destructors.*/ +REGION_ALIAS("XTORS_FLASH", flash4); +REGION_ALIAS("XTORS_FLASH_LMA", flash4); + +/* Flash region to be used for code text.*/ +REGION_ALIAS("TEXT_FLASH", flash4); +REGION_ALIAS("TEXT_FLASH_LMA", flash4); + +/* Flash region to be used for read only data.*/ +REGION_ALIAS("RODATA_FLASH", flash4); +REGION_ALIAS("RODATA_FLASH_LMA", flash4); + +/* Flash region to be used for various.*/ +REGION_ALIAS("VARIOUS_FLASH", flash4); +REGION_ALIAS("VARIOUS_FLASH_LMA", flash4); + +/* Flash region to be used for RAM(n) initialization data.*/ +REGION_ALIAS("RAM_INIT_FLASH_LMA", flash4); + +/* RAM region to be used for Main stack. This stack accommodates the processing + of all exceptions and interrupts.*/ +REGION_ALIAS("MAIN_STACK_RAM", ram0); + +/* RAM region to be used for the process stack. This is the stack used by + the main() function.*/ +REGION_ALIAS("PROCESS_STACK_RAM", ram0); + +/* RAM region to be used for data segment.*/ +REGION_ALIAS("DATA_RAM", ram0); +REGION_ALIAS("DATA_RAM_LMA", flash4); + +/* RAM region to be used for BSS segment.*/ +REGION_ALIAS("BSS_RAM", ram0); + +/* RAM region to be used for the default heap.*/ +REGION_ALIAS("HEAP_RAM", ram0); + +/* Generic rules inclusion.*/ +INCLUDE rules.ld + +/* TinyUF2 bootloader reset support */ +_board_dfu_dbl_tap = ORIGIN(ram0) + 64k - 4; /* this is based off the linker file for tinyuf2 */ diff --git a/keyboards/mlego/m60/rev1/rules.mk b/keyboards/mlego/m60/rev1/rules.mk index a3ccf0102d..6b119a1f37 100644 --- a/keyboards/mlego/m60/rev1/rules.mk +++ b/keyboards/mlego/m60/rev1/rules.mk @@ -2,7 +2,10 @@ MCU = STM32F401 # Bootloader selection -BOOTLOADER = stm32-dfu +BOOTLOADER = tinyuf2 +#BOOTLOADER = stm32-dfu +MCU_LDSCRIPT = STM32F401xE +EEPROM_DRIVER = vendor # Build Options # change yes to no to disable |