diff options
Diffstat (limited to 'keyboards/mitosis')
| -rw-r--r-- | keyboards/mitosis/keymaps/datagrok/keymap.c | 29 | ||||
| -rw-r--r-- | keyboards/mitosis/keymaps/datagrok/readme.md | 67 |
2 files changed, 57 insertions, 39 deletions
diff --git a/keyboards/mitosis/keymaps/datagrok/keymap.c b/keyboards/mitosis/keymaps/datagrok/keymap.c index 36683fbc5d..24d9d65004 100644 --- a/keyboards/mitosis/keymaps/datagrok/keymap.c +++ b/keyboards/mitosis/keymaps/datagrok/keymap.c @@ -2,8 +2,8 @@ enum mitosis_layers { - _xW, // workman _xQ, // qwerty + _xW, // workman _xS, // symbols _xN, // numbers _xF // functions @@ -12,7 +12,6 @@ enum mitosis_layers // Fillers to make layering more clear #define XXXXXXX KC_NO // No-op (no key in this location on Mitosis' fake matrix) #define _______ KC_TRNS // Transparent, because I haven't decided a mapping yet -#define ___M___ KC_TRNS // Transparent, as required by modifier key on another layer #define KC_LMTA KC_LALT // For fun, name the mods like the space cadet keyboard does #define KC_RMTA KC_RALT // META #define KC_LSUP KC_LGUI // SUPER @@ -27,17 +26,17 @@ enum mitosis_layers // other is released. Which doesn't bother me. const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_xW] = { - {KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_SCLN}, - {KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I}, - {KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, KC_DOT, KC_QUOT}, - {XXXXXXX, KC_LSUP, KC_LCTL, MO(_xN), KC_LSFT, KC_RSFT, MO(_xN), KC_RCTL, KC_RSUP, XXXXXXX}, - {XXXXXXX, KC_LHYP, KC_LMTA, MO(_xS), KC_BSPC, KC_SPC, MO(_xS), KC_RMTA, KC_RHYP, XXXXXXX} - }, [_xQ] = { {KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P}, {KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN}, {KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_QUOT}, + {XXXXXXX, KC_LSUP, KC_LCTL, MO(_xN), SFT_T(KC_TAB), KC_RSFT, MO(_xN), KC_RCTL, KC_RSUP, XXXXXXX}, + {XXXXXXX, KC_LHYP, KC_LMTA, MO(_xS), KC_BSPC, KC_SPC, MO(_xS), KC_RMTA, KC_RHYP, XXXXXXX} + }, + [_xW] = { + {KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_SCLN}, + {KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I}, + {KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, KC_DOT, KC_QUOT}, {XXXXXXX, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX}, {XXXXXXX, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX} }, @@ -46,21 +45,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_TAB, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_CIRC, KC_AMPR, KC_PIPE, KC_GRV, KC_UNDS}, {KC_BSLS, KC_RPRN, KC_RCBR, KC_RBRC, KC_RABK, KC_LABK, KC_LBRC, KC_LCBR, KC_LPRN, KC_SLSH}, {XXXXXXX, _______, _______, MO(_xF), _______, _______, MO(_xF), _______, _______, XXXXXXX}, - {XXXXXXX, _______, _______, ___M___, KC_DEL, KC_ENT, ___M___, _______, _______, XXXXXXX}, + {XXXXXXX, _______, _______, _______, KC_DEL, KC_ENT, _______, _______, _______, XXXXXXX}, }, [_xN] = { - {_______, _______, _______, _______, _______, KC_PSLS, KC_P7, KC_P8, KC_P9, KC_P0}, + {_______, _______, _______, _______, KC_NLCK, KC_PSLS, KC_P7, KC_P8, KC_P9, KC_P0}, {_______, _______, _______, _______, _______, KC_PAST, KC_P4, KC_P5, KC_P6, KC_PPLS}, {_______, _______, _______, _______, _______, KC_PMNS, KC_P1, KC_P2, KC_P3, KC_PEQL}, - {XXXXXXX, _______, _______, ___M___, _______, _______, ___M___, _______, _______, XXXXXXX}, + {XXXXXXX, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX}, {XXXXXXX, _______, _______, MO(_xF), _______, KC_PENT, MO(_xF), _______, _______, XXXXXXX}, }, [_xF] = { {_______, _______, KC_PGUP, _______, KC_VOLU, KC_F13, KC_F7, KC_F8, KC_F9, KC_F10}, {_______, KC_HOME, KC_PGDN, KC_END, KC_VOLD, KC_F14, KC_F4, KC_F5, KC_F6, KC_F11}, - {TG(_xQ), KC_MPRV, KC_MPLY, KC_MNXT, KC_MUTE, KC_F15, KC_F1, KC_F2, KC_F3, KC_F12}, - {XXXXXXX, _______, _______, ___M___, _______, _______, ___M___, _______, _______, XXXXXXX}, - {XXXXXXX, _______, _______, _______, ___M___, ___M___, _______, _______, _______, XXXXXXX}, + {TG(_xW), KC_MPRV, KC_MPLY, KC_MNXT, KC_MUTE, KC_F15, KC_F1, KC_F2, KC_F3, KC_F12}, + {XXXXXXX, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX}, + {XXXXXXX, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX}, }, }; diff --git a/keyboards/mitosis/keymaps/datagrok/readme.md b/keyboards/mitosis/keymaps/datagrok/readme.md index a5b7b6c624..a81829f26b 100644 --- a/keyboards/mitosis/keymaps/datagrok/readme.md +++ b/keyboards/mitosis/keymaps/datagrok/readme.md @@ -1,24 +1,30 @@ - + -[Keyboard layout editor source](http://www.keyboard-layout-editor.com/#/gists/e1a6a7a480fd4984c0bed38ee35f6c4f) +[Keyboard layout editor source](http://www.keyboard-layout-editor.com/#/gists/9cf33be8a8e773647cfa44a0dbc44b31) # a layout for the Mitosis - Emphasis on momentary modifiers, all usable from either hand, arranged - symmetrically, but distinguishable left/right by the OS. Shift, Fn1 - ("Lower"), Fn2 ("Raise"), Super ("Windows"), Meta ("Alt"), Hyper. + symmetrically, but distinguishable left/right by the OS. Shift, Red + ("Lower"), Blue ("Raise"), Super ("Windows"), Meta ("Alt"), Hyper. -- Fn1 and Fn2 are used to momentary-enable (like a shift key) one of three layers: +- Red and Blue are used to momentary-enable (like a shift key) one of three layers: - - Fn1 (Red): Symbols layer - - Fn2 (Blue): Numbers layer - - Both: Functions layer + - Red: Symbols layer + - Blue: Numbers layer + - "Purple" (both Red and Blue): Functions layer -- The base layer is a slight variant of [Workman][]. QWERTY may be toggled-on. +- The base layer is QWERTY. A slight variant of [Workman][] may be toggled-on. + +- Emphasis on minimizing hand travel, so as not to lose orientation with + homerow. - Paired programming symbols (braces, brackets, parentheses) are arranged - symmetrically in the symbols layer. `?` and `!` are moved to take the place - of `<` and `>`. + symmetrically in the symbols layer. + +- `?` and `!` are moved to take the place of `<` and `>`. Rationale: unmodded + and shifted keys should be for prose, while symbols useful for programming + should be colocated on their own layer. - No OS keymap modification required. @@ -30,17 +36,24 @@ - Remove the lines in `rules.mk` mentioning `F_CPU` and `F_USB`. - Remove the lines in `config.h` mentioning `SERIAL_UART_BAUD`. -- I'm learning a new key placement, so might as well go all out and use an - optimal non-QWERTY layout. +- Workman layout -- I like the way Workman feels and some of its advantages over Colemak. - Unfortunately, it was designed using a weighting system based on a standard - column-staggered keyboard so is probably not as optimal as one could achieve - on an ergonomic board like the Mitosis. + - I'm learning a new physical key placement, so I might as well go all out + and use an optimal non-QWERTY layout. + + - I like the way Workman feels and some of its advantages over Colemak. + Unfortunately, it was designed using a weighting system based on a + standard column-staggered keyboard so is probably not as optimal as one + could achieve on an ergonomic board like the Mitosis. Maybe run an + optimizer routine after I determine good values for key difficulty on the + Mitosis. - Arrows in the home position (on a layer). Mod+Arrows = PgUp/PgDn/Home/End, which is intuitive for me +- I use tab all the time for autocompletion. To allow it to live on the base + layer it is now Mod-Tapped with left shift. + ### Abandoned ideas - ~~"Since QWERTY and Workman keep angle brackets together, place other @@ -52,22 +65,28 @@ activates a symbols layer where all brackets are easily accessible. - Space/Enter to the left of layer select for Enter doesn't work well; I always - trigger space first. + trigger space first when mashing the keys simultaneously. This might not + continue to be true if I change the angle at which I strike the keys e.g. + with a neoprene base or a wrist support. -- I used to have Blue layer on ring finger, but that was too hard to use in +- I used to have Blue on ring finger, but that was too hard to use in conjunction with shift. ## To do +- Figure out where to place non-numpad numbers so we don't need num lock turned + on to type them? - Improve LED indications (may require modding bluetooth firmware): - Is any board nonresponsive (which one?) - Does either board have a low battery? - Add Insert, PrintScr, Pause/Break -- Make QWERTY base layer for people who customize layout in software? Store - default base layer in eeprom? -- See if the henkans placement is at all useful for Japanese speakers, or abuse - different keysyms -- Mod a speaker onto my receiver and enable tones +- ~~Make QWERTY base layer for people who customize layout in software?~~ I + default to QWERTY now. +- Store default base layer in eeprom? +- See if the henkan/muhenkan placement is at all useful for Japanese speakers, + or abuse different keysyms for Left/Right Hyper. (Original space cadet used + scancodes 145/175. 145 is LANG2, 175 is "reserved" in USB HID spec.) +- Mod a buzzer onto my receiver and enable tones - Implement "layer lock" key - Improve tri-layer behavior |