18 files changed, 10 insertions, 176 deletions
diff --git a/keyboards/mechwild/bbs/bbs.c b/keyboards/mechwild/bbs/bbs.c
index 02c5f43dd9..9a7253e5da 100644
--- a/keyboards/mechwild/bbs/bbs.c
+++ b/keyboards/mechwild/bbs/bbs.c
@@ -16,7 +16,7 @@ bool dip_switch_update_kb(uint8_t index, bool active) {
 }
 #endif
 
-void eeconfig_init_kb() {
+void eeconfig_init_kb(void) {
     steno_set_mode(STENO_MODE_GEMINI); // or STENO_MODE_BOLT
     eeconfig_init_user();
 }
 \ No newline at end of file
diff --git a/keyboards/mechwild/bbs/config.h b/keyboards/mechwild/bbs/config.h
index 8798c484f1..4ac406d74d 100644
--- a/keyboards/mechwild/bbs/config.h
+++ b/keyboards/mechwild/bbs/config.h
@@ -3,7 +3,6 @@
  
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 5
@@ -32,9 +31,6 @@
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -45,25 +41,6 @@
  */
 //#define GRAVE_ESC_CTRL_OVERRIDE
 
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
 #define FORCE_NKRO
 
 /*
diff --git a/keyboards/mechwild/bbs/keymaps/default/keymap.c b/keyboards/mechwild/bbs/keymaps/default/keymap.c
index a37401eca4..1eabdcd540 100644
--- a/keyboards/mechwild/bbs/keymaps/default/keymap.c
+++ b/keyboards/mechwild/bbs/keymaps/default/keymap.c
@@ -10,12 +10,6 @@ enum layer_names {
     _FN1
 };
 
-/*   
- *  k00, k01, k02, k03, k04, k05,    k06, k07, k08, k09, k0A, k0B,\
- *  k10, k11, k12, k13, k14, k15,    k16, k17, k18, k19, k1A, k1B,\
- *                 k23, k24, k25,    k26, k27, k28                \
- */    
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* Base */
     [_BASE] = LAYOUT(
diff --git a/keyboards/mechwild/bde/config.h b/keyboards/mechwild/bde/config.h
index ad54af1aa8..232d4808fe 100644
--- a/keyboards/mechwild/bde/config.h
+++ b/keyboards/mechwild/bde/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/mechwild/bde/info.json b/keyboards/mechwild/bde/info.json
index 0177b4c949..e238945563 100644
--- a/keyboards/mechwild/bde/info.json
+++ b/keyboards/mechwild/bde/info.json
@@ -5,7 +5,6 @@
     "usb": {
         "vid": "0x6D77"
     },
-    "debounce": 5,
     "build": {
         "lto": true
     },
diff --git a/keyboards/mechwild/bde/lefty/keymaps/fancy/keymap.c b/keyboards/mechwild/bde/lefty/keymaps/fancy/keymap.c
index 3240dbdfb2..b70ac7a8ed 100644
--- a/keyboards/mechwild/bde/lefty/keymaps/fancy/keymap.c
+++ b/keyboards/mechwild/bde/lefty/keymaps/fancy/keymap.c
@@ -44,9 +44,9 @@ enum {
     left_enter,
 };
 
-uint8_t cur_dance(qk_tap_dance_state_t *state);
-void left_enter_finished(qk_tap_dance_state_t *state, void *user_data);
-void left_enter_reset(qk_tap_dance_state_t *state, void *user_data);
+uint8_t cur_dance(tap_dance_state_t *state);
+void left_enter_finished(tap_dance_state_t *state, void *user_data);
+void left_enter_reset(tap_dance_state_t *state, void *user_data);
 
 
 
@@ -79,7 +79,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 };
 
 
-uint8_t cur_dance(qk_tap_dance_state_t *state) {
+uint8_t cur_dance(tap_dance_state_t *state) {
     if (state->count == 1) {
         if (state->interrupted || !state->pressed) return SINGLE_TAP;
         // Key has not been interrupted, but the key is still held. Means you want to send a 'HOLD'.
@@ -95,7 +95,7 @@ static tap left_enter_tap_state = {
     .state = 0
 };
 
-void left_enter_finished(qk_tap_dance_state_t *state, void *user_data) {
+void left_enter_finished(tap_dance_state_t *state, void *user_data) {
     left_enter_tap_state.state = cur_dance(state);
     switch (left_enter_tap_state.state) {
         //case SINGLE_TAP: register_code(KC_ENT); break;
@@ -104,7 +104,7 @@ void left_enter_finished(qk_tap_dance_state_t *state, void *user_data) {
     }
 }
 
-void left_enter_reset(qk_tap_dance_state_t *state, void *user_data) {
+void left_enter_reset(tap_dance_state_t *state, void *user_data) {
     switch (left_enter_tap_state.state) {
         //case SINGLE_TAP: unregister_code(KC_ENT); break;
         case SINGLE_HOLD: unregister_code(KC_LSFT); break;
@@ -113,7 +113,7 @@ void left_enter_reset(qk_tap_dance_state_t *state, void *user_data) {
     left_enter_tap_state.state = 0;
 }
 
-qk_tap_dance_action_t tap_dance_actions[] = {
+tap_dance_action_t tap_dance_actions[] = {
     [left_enter] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, left_enter_finished, left_enter_reset)
 };
 
diff --git a/keyboards/mechwild/clunker/keymaps/default/keymap.c b/keyboards/mechwild/clunker/keymaps/default/keymap.c
index 688db2cbb3..7981a131c3 100644
--- a/keyboards/mechwild/clunker/keymaps/default/keymap.c
+++ b/keyboards/mechwild/clunker/keymaps/default/keymap.c
@@ -15,14 +15,6 @@ enum layer_names {
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* Base */
-    /* 
-    k00, k01, k02, k03, k04, k05, k06, k07,                     \
-    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, \
-    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A,      \
-    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, \
-    k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, \
-    k50, k51, k52,      k54,      k56,           k59, k5A, k5B  \
-    */
     [_BASE] = LAYOUT(
     KC_ESC,   KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_MUTE,
     KC_TAB,   KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,     KC_BSPC,
diff --git a/keyboards/mechwild/clunker/keymaps/via/keymap.c b/keyboards/mechwild/clunker/keymaps/via/keymap.c
index 688db2cbb3..7981a131c3 100644
--- a/keyboards/mechwild/clunker/keymaps/via/keymap.c
+++ b/keyboards/mechwild/clunker/keymaps/via/keymap.c
@@ -15,14 +15,6 @@ enum layer_names {
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* Base */
-    /* 
-    k00, k01, k02, k03, k04, k05, k06, k07,                     \
-    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, \
-    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A,      \
-    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, \
-    k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, \
-    k50, k51, k52,      k54,      k56,           k59, k5A, k5B  \
-    */
     [_BASE] = LAYOUT(
     KC_ESC,   KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_MUTE,
     KC_TAB,   KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,     KC_BSPC,
diff --git a/keyboards/mechwild/mercutio/config.h b/keyboards/mechwild/mercutio/config.h
index 5a8fbe1ec5..8c69956065 100755
--- a/keyboards/mechwild/mercutio/config.h
+++ b/keyboards/mechwild/mercutio/config.h
@@ -17,7 +17,6 @@
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 7
@@ -41,9 +40,6 @@
 /* Define custom font */
 #define OLED_FONT_H "lib/mercutiofont.c"
 
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 
diff --git a/keyboards/mechwild/mercutio/keymaps/fearless_spiff/keymap.c b/keyboards/mechwild/mercutio/keymaps/fearless_spiff/keymap.c
index f150c04803..76438f9dc3 100644
--- a/keyboards/mechwild/mercutio/keymaps/fearless_spiff/keymap.c
+++ b/keyboards/mechwild/mercutio/keymaps/fearless_spiff/keymap.c
@@ -58,7 +58,7 @@ enum {
 };
 
 // Tap Dance definitions
-qk_tap_dance_action_t tap_dance_actions[] = {
+tap_dance_action_t tap_dance_actions[] = {
     // Tap once for Tab, twice for Esc
     [TD_TAB_ESC] = ACTION_TAP_DANCE_DOUBLE(KC_TAB, KC_ESC),
 };
diff --git a/keyboards/mechwild/mercutio/keymaps/fearless_spiff_en/keymap.c b/keyboards/mechwild/mercutio/keymaps/fearless_spiff_en/keymap.c
index b39bc8b123..c79c00a707 100644
--- a/keyboards/mechwild/mercutio/keymaps/fearless_spiff_en/keymap.c
+++ b/keyboards/mechwild/mercutio/keymaps/fearless_spiff_en/keymap.c
@@ -57,7 +57,7 @@ enum {
 };
 
 // Tap Dance definitions
-qk_tap_dance_action_t tap_dance_actions[] = {
+tap_dance_action_t tap_dance_actions[] = {
     // Tap once for Tab, twice for Esc
     [TD_TAB_ESC] = ACTION_TAP_DANCE_DOUBLE(KC_TAB, KC_ESC),
 };
diff --git a/keyboards/mechwild/mokulua/mirrored/config.h b/keyboards/mechwild/mokulua/mirrored/config.h
index 3742bd1958..3cc7de83ab 100644
--- a/keyboards/mechwild/mokulua/mirrored/config.h
+++ b/keyboards/mechwild/mokulua/mirrored/config.h
@@ -3,7 +3,6 @@
 
 #pragma once
 
-#include "config_common.h"
 
 /* Key matrix size */
 #define MATRIX_ROWS 12
@@ -66,12 +65,6 @@
 //#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/mechwild/mokulua/standard/config.h b/keyboards/mechwild/mokulua/standard/config.h
index 21a6f314c3..4ebd81b24c 100644
--- a/keyboards/mechwild/mokulua/standard/config.h
+++ b/keyboards/mechwild/mokulua/standard/config.h
@@ -3,7 +3,6 @@
 
 #pragma once
 
-#include "config_common.h"
 
 /* Key matrix size */
 #define MATRIX_ROWS 12
@@ -66,12 +65,6 @@
 //#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -83,27 +76,6 @@
 //#define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/mechwild/mokulua/standard/keymaps/silly/config.h b/keyboards/mechwild/mokulua/standard/keymaps/silly/config.h
index 1e0e3ac5eb..271ab55292 100644
--- a/keyboards/mechwild/mokulua/standard/keymaps/silly/config.h
+++ b/keyboards/mechwild/mokulua/standard/keymaps/silly/config.h
@@ -3,5 +3,4 @@
 
 #pragma once
 
-#include "config_common.h"
 #define RGBLIGHT_LAYERS
 \ No newline at end of file
diff --git a/keyboards/mechwild/murphpad/config.h b/keyboards/mechwild/murphpad/config.h
index 4a056f036a..4d32dc71ec 100644
--- a/keyboards/mechwild/murphpad/config.h
+++ b/keyboards/mechwild/murphpad/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* Key matrix size */
 #define MATRIX_ROWS 6
@@ -66,9 +65,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 
diff --git a/keyboards/mechwild/obe/config.h b/keyboards/mechwild/obe/config.h
index fd10cf4cbe..590859b691 100644
--- a/keyboards/mechwild/obe/config.h
+++ b/keyboards/mechwild/obe/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 7
@@ -78,9 +77,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -92,27 +88,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/mechwild/puckbuddy/config.h b/keyboards/mechwild/puckbuddy/config.h
index 473b7b5ecd..89e8f8ae77 100644
--- a/keyboards/mechwild/puckbuddy/config.h
+++ b/keyboards/mechwild/puckbuddy/config.h
@@ -3,7 +3,6 @@
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 4
@@ -88,9 +87,6 @@
 //#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -102,27 +98,6 @@
 //#define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/mechwild/waka60/config.h b/keyboards/mechwild/waka60/config.h
index df73f51946..d498e9aa90 100644
--- a/keyboards/mechwild/waka60/config.h
+++ b/keyboards/mechwild/waka60/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 10
@@ -74,9 +73,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -88,27 +84,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */