diff options
Diffstat (limited to 'keyboards/mechwild/mokulua/standard')
12 files changed, 0 insertions, 368 deletions
diff --git a/keyboards/mechwild/mokulua/standard/config.h b/keyboards/mechwild/mokulua/standard/config.h deleted file mode 100644 index 21a6f314c3..0000000000 --- a/keyboards/mechwild/mokulua/standard/config.h +++ /dev/null @@ -1,125 +0,0 @@ -// Copyright 2022 Kyle McCreery (@kylemccreery) -// SPDX-License-Identifier: GPL-2.0-or-later - -#pragma once - -#include "config_common.h" - -/* Key matrix size */ -#define MATRIX_ROWS 12 -#define MATRIX_COLS 6 - -/* Key matrix pins */ -#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3 } -#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 } - -/* Encoder pins */ -#define ENCODERS_PAD_A { D2 } -#define ENCODERS_PAD_B { B2 } - -/* Encoder resolution */ -#define ENCODER_RESOLUTION 4 -#define TAP_CODE_DELAY 10 - -/* COL2ROW, ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -#define OLED_FONT_H "keyboards/mechwild/mokulua/glcdfont.c" - -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D3 -#define MASTER_LEFT -//#define MASTER_RIGHT -#define RGBLIGHT_SPLIT -#define RGBLED_SPLIT { 8, 8 } -#define SPLIT_LAYER_STATE_ENABLE -#define SPLIT_LED_STATE_ENABLE -#define SPLIT_MODS_ENABLE -#define SPLIT_OLED_ENABLE - -/* RGB options */ -#define RGB_DI_PIN B6 -#ifdef RGB_DI_PIN -# define RGBLED_NUM 16 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -/*== choose RGB animations ==*/ -//# define RGBLIGHT_EFFECT_BREATHING -# define RGBLIGHT_EFFECT_RAINBOW_MOOD -# define RGBLIGHT_EFFECT_RAINBOW_SWIRL -//# define RGBLIGHT_EFFECT_SNAKE -//# define RGBLIGHT_EFFECT_KNIGHT -//# define RGBLIGHT_EFFECT_CHRISTMAS -//# define RGBLIGHT_EFFECT_STATIC_GRADIENT -//# define RGBLIGHT_EFFECT_RGB_TEST -//# define RGBLIGHT_EFFECT_ALTERNATING -/*== customize breathing effect ==*/ -/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -/*==== use exp() and sin() ====*/ -//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -#endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT - - -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/mechwild/mokulua/standard/info.json b/keyboards/mechwild/mokulua/standard/info.json deleted file mode 100644 index 74bcd0b16f..0000000000 --- a/keyboards/mechwild/mokulua/standard/info.json +++ /dev/null @@ -1,92 +0,0 @@ -{ - "keyboard_name": "Mokulua Standard", - "manufacturer": "MechWild", - "url": "https://mechwild.com", - "maintainer": "kylemccreery", - "usb": { - "vid": "0x6D77", - "pid": "0x170B", - "device_version": "1.0.3" - }, - "layouts": { - "LAYOUT_standard": { - "layout": [ - {"label":"Esc", "x":0.62, "y":0}, - {"label":"1!", "x":1.62, "y":0}, - {"label":"2@", "x":2.62, "y":0}, - {"label":"3#", "x":3.62, "y":0}, - {"label":"4$", "x":4.62, "y":0}, - {"label":"5%", "x":5.62, "y":0}, - {"label":"6^", "x":6.62, "y":0}, - {"label":"7&", "x":9.62, "y":0}, - {"label":"8*", "x":10.62, "y":0}, - {"label":"9(", "x":11.62, "y":0}, - {"label":"0)", "x":12.62, "y":0}, - {"label":"-_", "x":13.62, "y":0}, - {"label":"Backspace", "x":14.62, "y":0}, - {"label":"Backspace", "x":15.62, "y":0}, - - {"label":"Tab", "x":0.37, "y":1, "w":1.5}, - {"label":"Q", "x":1.87, "y":1}, - {"label":"W", "x":2.87, "y":1}, - {"label":"E", "x":3.87, "y":1}, - {"label":"R", "x":4.87, "y":1}, - {"label":"T", "x":5.87, "y":1}, - {"label":"Y", "x":6.87, "y":1}, - {"label":"U", "x":10.37, "y":1}, - {"label":"I", "x":11.37, "y":1}, - {"label":"O", "x":12.37, "y":1}, - {"label":"P", "x":13.37, "y":1}, - {"label":"]}", "x":14.37, "y":1}, - {"label":"\\|", "x":15.37, "y":1, "w":1.5}, - - {"label":"Caps Lock", "x":0.25, "y":2, "w":1.75}, - {"label":"A", "x":2, "y":2}, - {"label":"S", "x":3, "y":2}, - {"label":"D", "x":4, "y":2}, - {"label":"F", "x":5, "y":2}, - {"label":"G", "x":6, "y":2}, - {"label":"H", "x":7, "y":2}, - {"label":";:", "x":9.75, "y":2}, - {"label":"H", "x":10.75, "y":2}, - {"label":"J", "x":11.75, "y":2}, - {"label":"K", "x":12.75, "y":2}, - {"label":"L", "x":13.75, "y":2}, - {"label":"'\"", "x":14.75, "y":2}, - {"label":"Enter", "x":15.75, "y":2, "w":1.75}, - - {"label":"Shift", "x":0, "y":3, "w":1.25}, - {"label":"\\|", "x":1.25, "y":3}, - {"label":"Z", "x":2.25, "y":3}, - {"label":"X", "x":3.25, "y":3}, - {"label":"C", "x":4.25, "y":3}, - {"label":"V", "x":5.25, "y":3}, - {"label":"B", "x":6.25, "y":3}, - {"label":"Mute", "x":7.37, "y":3}, - {"label":"Mute", "x":9.37, "y":3}, - {"label":"B", "x":10.5, "y":3}, - {"label":"N", "x":11.5, "y":3}, - {"label":"M", "x":12.5, "y":3}, - {"label":",<", "x":13.5, "y":3}, - {"label":".>", "x":14.5, "y":3}, - {"label":"\u2191", "x":15.5, "y":3}, - {"label":"Shift", "x":16.5, "y":3, "w":1.25}, - - {"label":"Ctrl", "x":0.25, "y":4}, - {"label":"GUI", "x":1.25, "y":4}, - {"label":"Alt", "x":2.25, "y":4}, - {"label":"Fn2", "x":3.5, "y":4, "w":1.25}, - {"label":"Fn1/Space", "x":4.94, "y":4, "h":1.5}, - {"label":"Fn2/Space", "x":5.94, "y":4, "h":1.5}, - {"label":"RGB Mode -", "x":7.13, "y":4}, - {"label":"RGB Mode +", "x":9.62, "y":4}, - {"label":"Fn2/Space", "x":10.81, "y":4, "h":1.5}, - {"label":"Fn1/Space", "x":11.81, "y":4, "h":1.5}, - {"label":"Fn2", "x":13, "y":4, "w":1.25}, - {"label":"\u2190", "x":14.5, "y":4}, - {"label":"\u2193", "x":15.5, "y":4}, - {"label":"\u2192", "x":16.5, "y":4} - ] - } - } -} diff --git a/keyboards/mechwild/mokulua/standard/keymaps/default/readme.md b/keyboards/mechwild/mokulua/standard/keymaps/default/readme.md deleted file mode 100644 index 81569df142..0000000000 --- a/keyboards/mechwild/mokulua/standard/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for Mokulua using a standard right-half diff --git a/keyboards/mechwild/mokulua/standard/keymaps/default/rules.mk b/keyboards/mechwild/mokulua/standard/keymaps/default/rules.mk deleted file mode 100644 index ee32568148..0000000000 --- a/keyboards/mechwild/mokulua/standard/keymaps/default/rules.mk +++ /dev/null @@ -1 +0,0 @@ -ENCODER_MAP_ENABLE = yes diff --git a/keyboards/mechwild/mokulua/standard/keymaps/silly/config.h b/keyboards/mechwild/mokulua/standard/keymaps/silly/config.h deleted file mode 100644 index 1e0e3ac5eb..0000000000 --- a/keyboards/mechwild/mokulua/standard/keymaps/silly/config.h +++ /dev/null @@ -1,7 +0,0 @@ -// Copyright 2022 Kyle McCreery (@kylemccreery) -// SPDX-License-Identifier: GPL-2.0-or-later - -#pragma once - -#include "config_common.h" -#define RGBLIGHT_LAYERS
\ No newline at end of file diff --git a/keyboards/mechwild/mokulua/standard/keymaps/silly/readme.md b/keyboards/mechwild/mokulua/standard/keymaps/silly/readme.md deleted file mode 100644 index 4659a3aaeb..0000000000 --- a/keyboards/mechwild/mokulua/standard/keymaps/silly/readme.md +++ /dev/null @@ -1 +0,0 @@ -# A keymap customized for use by Silly. Makes use of RGB Layer indication and a remapped layer for use in specific video games. diff --git a/keyboards/mechwild/mokulua/standard/keymaps/silly/rules.mk b/keyboards/mechwild/mokulua/standard/keymaps/silly/rules.mk deleted file mode 100644 index 36b7ba9cbc..0000000000 --- a/keyboards/mechwild/mokulua/standard/keymaps/silly/rules.mk +++ /dev/null @@ -1,2 +0,0 @@ -VIA_ENABLE = yes -LTO_ENABLE = yes diff --git a/keyboards/mechwild/mokulua/standard/keymaps/via/readme.md b/keyboards/mechwild/mokulua/standard/keymaps/via/readme.md deleted file mode 100644 index 4f47e50e88..0000000000 --- a/keyboards/mechwild/mokulua/standard/keymaps/via/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The VIA keymap for Mokulua using a standard right-half diff --git a/keyboards/mechwild/mokulua/standard/keymaps/via/rules.mk b/keyboards/mechwild/mokulua/standard/keymaps/via/rules.mk deleted file mode 100644 index 1189f4ad19..0000000000 --- a/keyboards/mechwild/mokulua/standard/keymaps/via/rules.mk +++ /dev/null @@ -1,3 +0,0 @@ -VIA_ENABLE = yes -LTO_ENABLE = yes -ENCODER_MAP_ENABLE = yes diff --git a/keyboards/mechwild/mokulua/standard/rules.mk b/keyboards/mechwild/mokulua/standard/rules.mk deleted file mode 100644 index 5aae5c7c76..0000000000 --- a/keyboards/mechwild/mokulua/standard/rules.mk +++ /dev/null @@ -1,22 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no # Enable N-Key Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output -ENCODER_ENABLE = yes # Enable encoder -OLED_ENABLE = yes # Enable OLED Screen -OLED_DRIVER = SSD1306 # Define OLED Driver -SPLIT_KEYBOARD = yes # Define split functionality
\ No newline at end of file diff --git a/keyboards/mechwild/mokulua/standard/standard.c b/keyboards/mechwild/mokulua/standard/standard.c deleted file mode 100644 index 4bccb70e3f..0000000000 --- a/keyboards/mechwild/mokulua/standard/standard.c +++ /dev/null @@ -1,82 +0,0 @@ -// Copyright 2022 Kyle McCreery (@Kyle McCreery) -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "standard.h" - -#ifdef ENCODER_ENABLE -bool encoder_update_kb(uint8_t index, bool clockwise) { - if (!encoder_update_user(index, clockwise)) { return false; } - switch (index) { - case 0: - if (clockwise) { - tap_code(KC_VOLU); - } else { - tap_code(KC_VOLD); - } - break; - case 1: - if (clockwise) { - tap_code(KC_PGUP); - } else { - tap_code(KC_PGDN); - } - break; - - } - return true; -} -#endif - -#ifdef OLED_ENABLE - oled_rotation_t oled_init_kb(oled_rotation_t rotation) { - return OLED_ROTATION_270; // flips the display 270 degrees - } - - static void render_logo(void) { // Render MechWild "MW" Logo - static const char PROGMEM logo_1[] = {0x8A, 0x8B, 0x8C, 0x8D, 0x00}; - static const char PROGMEM logo_2[] = {0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0x00}; - static const char PROGMEM logo_3[] = {0xCA, 0xCB, 0xCC, 0xCD, 0x00}; - static const char PROGMEM logo_4[] = {0x20, 0x8E, 0x8F, 0x90, 0x00}; - oled_set_cursor(0,0); - oled_write_P(logo_1, false); - oled_set_cursor(0,1); - oled_write_P(logo_2, false); - oled_set_cursor(0,2); - oled_write_P(logo_3, false); - oled_set_cursor(0,3); - oled_write_P(logo_4, false); - } - bool oled_task_kb(void) { - if (!oled_task_user()) { - return false; - } - render_logo(); - oled_set_cursor(0,6); - - oled_write_ln_P(PSTR("Layer"), false); - - switch (get_highest_layer(layer_state)) { - case 0: - oled_write_ln_P(PSTR("Base"), false); - break; - case 1: - oled_write_ln_P(PSTR("FN 1"), false); - break; - case 2: - oled_write_ln_P(PSTR("FN 2"), false); - break; - case 3: - oled_write_ln_P(PSTR("FN 3"), false); - break; - default: - oled_write_ln_P(PSTR("Undef"), false); - } - oled_write_ln_P(PSTR(""), false); - // Host Keyboard LED Status - led_t led_state = host_keyboard_led_state(); - oled_write_ln_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); - oled_write_ln_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); - oled_write_ln_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); - return false; - } -#endif diff --git a/keyboards/mechwild/mokulua/standard/standard.h b/keyboards/mechwild/mokulua/standard/standard.h deleted file mode 100644 index 0484340e8d..0000000000 --- a/keyboards/mechwild/mokulua/standard/standard.h +++ /dev/null @@ -1,31 +0,0 @@ -// Copyright 2022 Kyle McCreery (@kylemccreery) -// SPDX-License-Identifier: GPL-2.0-or-later - -#pragma once - -#include "quantum.h" - -#define ___ KC_NO - -#define LAYOUT_standard( \ - L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ - L10, L11, L12, L13, L14, L15, L16, R11, R12, R13, R14, R15, R16, \ - L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \ - L30, L31, L32, L33, L34, L35, L36, L37, R30, R31, R32, R33, R34, R35, R36, R37, \ - L40, L41, L42, L43, L44, L45, L46, R40, R41, R42, R43, R44, R45, R46 \ -) { \ - { L00, L01, L02, L03, L04, L05 }, \ - { L10, L11, L12, L13, L14, L15 }, \ - { L20, L21, L22, L23, L24, L25 }, \ - { L30, L31, L32, L33, L34, L35 }, \ - { L40, L41, L42, L43, L44, L45 }, \ - { L46, L36, L37, L26, L16, L06 }, \ - { R01, R02, R03, R04, R05, R06 }, \ - { R11, R12, R13, R14, R15, R16 }, \ - { R21, R22, R23, R24, R25, R26 }, \ - { R32, R33, R34, R35, R36, R37 }, \ - { R41, R42, R43, R44, R45, R46 }, \ - { R00, R20, R31, R30, R40, ___ } \ -} - -#define LAYOUT LAYOUT_standard |