diff options
Diffstat (limited to 'keyboards/mechlovin')
75 files changed, 806 insertions, 256 deletions
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev1/info.json b/keyboards/mechlovin/adelais/rgb_led/rev1/info.json index 816b9414c1..bdf9e7fdf5 100644 --- a/keyboards/mechlovin/adelais/rgb_led/rev1/info.json +++ b/keyboards/mechlovin/adelais/rgb_led/rev1/info.json @@ -4,7 +4,7 @@ "pid": "0xAEC1" }, "rgb_matrix": { - "driver": "WS2812" + "driver": "ws2812" }, "matrix_pins": { "cols": ["A10", "A9", "A8", "B15", "B14", "B13", "B12", "B11", "B10", "B8", "B4", "B5", "B3", "C14", "A15"], diff --git a/keyboards/mechlovin/adelais/rgb_led/rev2/config.h b/keyboards/mechlovin/adelais/rgb_led/rev2/config.h index 1e549f9a89..088c29a048 100644 --- a/keyboards/mechlovin/adelais/rgb_led/rev2/config.h +++ b/keyboards/mechlovin/adelais/rgb_led/rev2/config.h @@ -1,6 +1,5 @@ #pragma once -#define RGBLED_NUM 23 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -11,9 +10,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 //rgb matrix setting // This is a 7-bit address, that gets left-shifted and bit 0 @@ -86,5 +82,3 @@ # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #define RGB_MATRIX_DISABLE_KEYCODES - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/mechlovin/adelais/rgb_led/rev2/info.json b/keyboards/mechlovin/adelais/rgb_led/rev2/info.json index 4ac693f894..b086d9ce95 100644 --- a/keyboards/mechlovin/adelais/rgb_led/rev2/info.json +++ b/keyboards/mechlovin/adelais/rgb_led/rev2/info.json @@ -4,7 +4,7 @@ "pid": "0xAEC2" }, "rgb_matrix": { - "driver": "IS31FL3731" + "driver": "is31fl3731" }, "matrix_pins": { "cols": ["A10", "A9", "A8", "B15", "B14", "B13", "B12", "B11", "B10", "B8", "B4", "B5", "B3", "C14", "A7"], @@ -16,6 +16,14 @@ {"pin_a": "A4", "pin_b": "A3"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 23 + }, "ws2812": { "pin": "A15" }, diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/config.h b/keyboards/mechlovin/adelais/rgb_led/rev3/config.h index c4f801b40d..3c514668d1 100644 --- a/keyboards/mechlovin/adelais/rgb_led/rev3/config.h +++ b/keyboards/mechlovin/adelais/rgb_led/rev3/config.h @@ -20,7 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #ifdef RGBLIGHT_ENABLE #define WS2812_SPI SPID1 // default: SPID1 #define WS2812_SPI_MOSI_PAL_MODE 5 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5 -#define RGBLED_NUM 23 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -31,9 +30,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #endif #ifdef RGB_MATRIX_ENABLE @@ -108,5 +104,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2 #endif - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/info.json b/keyboards/mechlovin/adelais/rgb_led/rev3/info.json index d1775ccb83..ba6f31b83e 100644 --- a/keyboards/mechlovin/adelais/rgb_led/rev3/info.json +++ b/keyboards/mechlovin/adelais/rgb_led/rev3/info.json @@ -4,7 +4,7 @@ "pid": "0xAEC3" }, "rgb_matrix": { - "driver": "IS31FL3741" + "driver": "is31fl3741" }, "matrix_pins": { "cols": ["B10", "B11", "B2", "B1", "B0", "A6", "A5", "A10", "A9", "A15", "B3", "B4", "B5", "B8", "B9"], @@ -16,6 +16,9 @@ {"pin_a": "B12", "pin_b": "B13"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "STM32F103", "bootloader": "stm32duino", "indicators": { @@ -23,6 +26,11 @@ "num_lock": "A0", "scroll_lock": "C15" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 23 + }, "ws2812": { "pin": "A7", "driver": "spi" diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/rules.mk b/keyboards/mechlovin/adelais/rgb_led/rev3/rules.mk index 5664ce6844..e144301381 100644 --- a/keyboards/mechlovin/adelais/rgb_led/rev3/rules.mk +++ b/keyboards/mechlovin/adelais/rgb_led/rev3/rules.mk @@ -6,6 +6,3 @@ RGBLIGHT_ENABLE = yes ENCODER_ENABLE = yes CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration - -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
\ No newline at end of file diff --git a/keyboards/mechlovin/adelais/standard_led/arm/config.h b/keyboards/mechlovin/adelais/standard_led/arm/config.h index 1c9b61b9df..68857621b7 100644 --- a/keyboards/mechlovin/adelais/standard_led/arm/config.h +++ b/keyboards/mechlovin/adelais/standard_led/arm/config.h @@ -18,9 +18,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once #define BACKLIGHT_PWM_DRIVER PWMD3 -#define BACKLIGHT_PWM_CHANNEL 3 -#define RGBLED_NUM 23 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mechlovin/adelais/standard_led/arm/info.json b/keyboards/mechlovin/adelais/standard_led/arm/info.json index 9c6bd46a70..c4b97fbd78 100644 --- a/keyboards/mechlovin/adelais/standard_led/arm/info.json +++ b/keyboards/mechlovin/adelais/standard_led/arm/info.json @@ -9,6 +9,9 @@ "pin": "B0", "breathing": true }, + "rgblight": { + "led_count": 23 + }, "ws2812": { "pin": "A7" }, diff --git a/keyboards/mechlovin/adelais/standard_led/arm/rev3/config.h b/keyboards/mechlovin/adelais/standard_led/arm/rev3/config.h deleted file mode 100644 index 254d204038..0000000000 --- a/keyboards/mechlovin/adelais/standard_led/arm/rev3/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -#define TAP_CODE_DELAY 10
\ No newline at end of file diff --git a/keyboards/mechlovin/adelais/standard_led/arm/rev3/info.json b/keyboards/mechlovin/adelais/standard_led/arm/rev3/info.json index a5ebef5b87..46907dc7a9 100644 --- a/keyboards/mechlovin/adelais/standard_led/arm/rev3/info.json +++ b/keyboards/mechlovin/adelais/standard_led/arm/rev3/info.json @@ -9,6 +9,9 @@ {"pin_a": "B7", "pin_b": "B6"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "STM32F303", "board": "QMK_PROTON_C", "bootloader": "stm32-dfu", diff --git a/keyboards/mechlovin/adelais/standard_led/arm/rev4/config.h b/keyboards/mechlovin/adelais/standard_led/arm/rev4/config.h deleted file mode 100644 index 7905be1891..0000000000 --- a/keyboards/mechlovin/adelais/standard_led/arm/rev4/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* -Copyright 2021 Mechlovin' Studio - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ -#pragma once - -#define TAP_CODE_DELAY 10
\ No newline at end of file diff --git a/keyboards/mechlovin/adelais/standard_led/arm/rev4/info.json b/keyboards/mechlovin/adelais/standard_led/arm/rev4/info.json index b6ee0c5b67..f0d10942ad 100644 --- a/keyboards/mechlovin/adelais/standard_led/arm/rev4/info.json +++ b/keyboards/mechlovin/adelais/standard_led/arm/rev4/info.json @@ -9,6 +9,9 @@ {"pin_a": "B7", "pin_b": "B6"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "layout_aliases": { "LAYOUT_all": "LAYOUT_alice_split_bs" }, diff --git a/keyboards/mechlovin/adelais/standard_led/avr/rev1/config.h b/keyboards/mechlovin/adelais/standard_led/avr/rev1/config.h index 0e23efaf3a..f1fda9adfc 100644 --- a/keyboards/mechlovin/adelais/standard_led/avr/rev1/config.h +++ b/keyboards/mechlovin/adelais/standard_led/avr/rev1/config.h @@ -31,7 +31,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION ROW2COL -#define RGBLED_NUM 23 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -42,5 +41,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/mechlovin/adelais/standard_led/avr/rev1/info.json b/keyboards/mechlovin/adelais/standard_led/avr/rev1/info.json index 31de7de957..d7c51465ff 100644 --- a/keyboards/mechlovin/adelais/standard_led/avr/rev1/info.json +++ b/keyboards/mechlovin/adelais/standard_led/avr/rev1/info.json @@ -10,10 +10,16 @@ {"pin_a": "C7", "pin_b": "C6"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "backlight": { "pin": "B5", "breathing": true }, + "rgblight": { + "led_count": 23 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/mechlovin/delphine/mono_led/config.h b/keyboards/mechlovin/delphine/mono_led/config.h index 61c495c889..8349512ec5 100644 --- a/keyboards/mechlovin/delphine/mono_led/config.h +++ b/keyboards/mechlovin/delphine/mono_led/config.h @@ -2,11 +2,6 @@ #pragma once #ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 13 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mechlovin/delphine/mono_led/info.json b/keyboards/mechlovin/delphine/mono_led/info.json index 7f775f8c36..7e665b3830 100644 --- a/keyboards/mechlovin/delphine/mono_led/info.json +++ b/keyboards/mechlovin/delphine/mono_led/info.json @@ -3,6 +3,12 @@ "pid": "0xDEF1", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 13, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/mechlovin/delphine/rgb_led/config.h b/keyboards/mechlovin/delphine/rgb_led/config.h index 7d9aa447f9..1e79908cd2 100644 --- a/keyboards/mechlovin/delphine/rgb_led/config.h +++ b/keyboards/mechlovin/delphine/rgb_led/config.h @@ -1,11 +1,6 @@ #pragma once #ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 13 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mechlovin/delphine/rgb_led/info.json b/keyboards/mechlovin/delphine/rgb_led/info.json index 3b9fb036e9..6beba9038c 100644 --- a/keyboards/mechlovin/delphine/rgb_led/info.json +++ b/keyboards/mechlovin/delphine/rgb_led/info.json @@ -3,10 +3,16 @@ "pid": "0xDEF2", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + |