diff options
Diffstat (limited to 'keyboards/mechlovin/delphine/rgb_led')
| -rw-r--r-- | keyboards/mechlovin/delphine/rgb_led/config.h | 89 | ||||
| -rw-r--r-- | keyboards/mechlovin/delphine/rgb_led/info.json | 6 | ||||
| -rw-r--r-- | keyboards/mechlovin/delphine/rgb_led/rgb_led.c | 160 | ||||
| -rw-r--r-- | keyboards/mechlovin/delphine/rgb_led/rgb_led.h | 19 | ||||
| -rw-r--r-- | keyboards/mechlovin/delphine/rgb_led/rules.mk | 3 |
5 files changed, 0 insertions, 277 deletions
diff --git a/keyboards/mechlovin/delphine/rgb_led/config.h b/keyboards/mechlovin/delphine/rgb_led/config.h deleted file mode 100644 index 0d5bfb57f9..0000000000 --- a/keyboards/mechlovin/delphine/rgb_led/config.h +++ /dev/null @@ -1,89 +0,0 @@ -#pragma once - -#ifdef RGBLIGHT_ENABLE -#define RGB_DI_PIN E2 -#define RGBLED_NUM 13 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -/*== all animations enable ==*/ -#define RGBLIGHT_ANIMATIONS -// /*== or choose animations ==*/ -// #define RGBLIGHT_EFFECT_BREATHING -// #define RGBLIGHT_EFFECT_RAINBOW_MOOD -// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL -// #define RGBLIGHT_EFFECT_SNAKE -// #define RGBLIGHT_EFFECT_KNIGHT -// #define RGBLIGHT_EFFECT_CHRISTMAS -// #define RGBLIGHT_EFFECT_STATIC_GRADIENT -// #define RGBLIGHT_EFFECT_RGB_TEST -// #define RGBLIGHT_EFFECT_ALTERNATING -#endif - -//rgb matrix setting// This is a 7-bit address, that gets left-shifted and bit 0 -// set to 0 for write, 1 for read (as per I2C protocol) -// The address will vary depending on your wiring: -// 0b1110100 AD <-> GND -// 0b1110111 AD <-> VCC -// 0b1110101 AD <-> SCL -// 0b1110110 AD <-> SDA -#define DRIVER_ADDR_1 0b1110110 -#define DRIVER_COUNT 1 -#define DRIVER_LED_TOTAL 25 -#define RGB_MATRIX_KEYPRESSES // reacts to keypresses -#define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) -#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects -// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended -#define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) -#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 -#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set -// RGB Matrix Animation modes. Explicitly enabled -// For full list of effects, see: -// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects -# define ENABLE_RGB_MATRIX_ALPHAS_MODS -# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN -# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT -# define ENABLE_RGB_MATRIX_BREATHING -# define ENABLE_RGB_MATRIX_BAND_SAT -# define ENABLE_RGB_MATRIX_BAND_VAL -# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT -# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL -# define ENABLE_RGB_MATRIX_CYCLE_ALL -# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN -# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN -# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL -# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL -# define ENABLE_RGB_MATRIX_DUAL_BEACON -# define ENABLE_RGB_MATRIX_RAINBOW_BEACON -# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS -# define ENABLE_RGB_MATRIX_RAINDROPS -# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -# define ENABLE_RGB_MATRIX_HUE_BREATHING -# define ENABLE_RGB_MATRIX_HUE_PENDULUM -# define ENABLE_RGB_MATRIX_HUE_WAVE -# define ENABLE_RGB_MATRIX_PIXEL_RAIN -# define ENABLE_RGB_MATRIX_PIXEL_FLOW -# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL -// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined -# define ENABLE_RGB_MATRIX_TYPING_HEATMAP -# define ENABLE_RGB_MATRIX_DIGITAL_RAIN -// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -# define ENABLE_RGB_MATRIX_SPLASH -# define ENABLE_RGB_MATRIX_MULTISPLASH -# define ENABLE_RGB_MATRIX_SOLID_SPLASH -# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH diff --git a/keyboards/mechlovin/delphine/rgb_led/info.json b/keyboards/mechlovin/delphine/rgb_led/info.json deleted file mode 100644 index 0a8f1ab220..0000000000 --- a/keyboards/mechlovin/delphine/rgb_led/info.json +++ /dev/null @@ -1,6 +0,0 @@ -{ - "usb": { - "pid": "0xDEF2", - "device_version": "0.0.1" - } -} diff --git a/keyboards/mechlovin/delphine/rgb_led/rgb_led.c b/keyboards/mechlovin/delphine/rgb_led/rgb_led.c deleted file mode 100644 index 413a9a06ea..0000000000 --- a/keyboards/mechlovin/delphine/rgb_led/rgb_led.c +++ /dev/null @@ -1,160 +0,0 @@ -/* Copyright 2020 Team Mechlovin' - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "rgb_led.h" - - -#ifdef RGB_MATRIX_ENABLE -const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { -// left CA - {0, C5_2, C6_2, C7_2}, //D2-0 - {0, C1_1, C3_2, C4_2}, //D20-1 - {0, C5_1, C6_1, C7_1}, //D36-2 - {0, C2_1, C3_1, C4_1}, //D46-3 - {0, C5_4, C6_4, C7_4}, //D65-4 - {0, C1_3, C2_3, C3_3}, //D26-5 - {0, C5_3, C6_3, C7_3}, //D37-6 - {0, C1_2, C2_2, C4_3}, //D47-7 - {0, C4_5, C5_5, C7_6}, //D11-8 - {0, C1_5, C2_5, C3_5}, //D27-9 - {0, C4_4, C6_5, C7_5}, //D38-10 - {0, C1_4, C2_4, C3_4}, //D48-11 - -// left CB - {0, C2_9, C3_9, C4_9}, //D17-12 - {0, C5_9, C6_9, C7_9}, //D28-13 - {0, C1_9, C3_10, C4_10}, //D39-14 - {0, C5_10, C6_10, C7_10}, //D49-15 - {0, C1_10, C2_10, C4_11}, //D18-16 - {0, C5_11, C6_11, C7_11}, //D29-17 - {0, C1_11, C2_11, C3_11}, //D40-18 - {0, C5_12, C6_12, C7_12}, //D50-19 - {0, C1_12, C2_12, C3_12}, //D19-20 - {0, C1_13, C2_13, C3_13}, //D61-21 - {0, C4_13, C5_13, C7_14}, //D35-22 - {0, C1_14, C2_14, C3_14}, //D41-23 - {0, C4_14, C5_14, C6_14}, //D51-24 -}; - -led_config_t g_led_config = { { - // Key Matrix to LED Index - {0, 1, 2, 3}, - {4, 5, 6, 7}, - {8, 9, 10, 11}, - {12, 13, 14, 15}, - {16, 17, 18, 19}, - {20, 22, 23, 24} - }, - { - //LED Index to Physical Positon - { 0, 0}, { 75, 0}, {149, 0}, {224, 0}, - { 0, 13}, { 75, 13}, {149, 13}, {224, 13}, - { 0, 25}, { 75, 25}, {149, 25}, {224, 25}, - { 0, 38}, { 75, 38}, {149, 38}, {224, 38}, - { 0, 51}, { 75, 51}, {149, 51}, {224, 51}, - { 0, 64}, { 37, 64}, { 75, 64}, {149, 64}, {224, 64}, -}, { - 4, 4, 4, 4, - 4, 1, 1, 4, - 4, 1, 1, 4, - 4, 1, 1, 4, - 4, 1, 1, 4, - 4, 0, 1, 1, 4, -} }; - -void rgb_matrix_indicators_kb(void) { - if (host_keyboard_led_state().num_lock) { - rgb_matrix_set_color(4, 255, 255, 255); - } -} - -__attribute__((weak)) -layer_state_t layer_state_set_user(layer_state_t state) { - // if on layer 1, turn on L1 LED, otherwise off. - if (get_highest_layer(state) == 0) { - rgb_matrix_set_color(1, 255, 0, 0); - } else { - rgb_matrix_set_color(1, 0, 0, 0); - } - // if on layer 2, turn on L2 LED, otherwise off. - if (get_highest_layer(state) == 1) { - rgb_matrix_set_color(0, 255, 0, 0); - } else { - rgb_matrix_set_color(0, 0, 0, 0); - } - - // if on layer 3, turn on L3 LED, otherwise off. - if (get_highest_layer(state) == 2) { - rgb_matrix_set_color(3, 255, 0, 0); - } else { - rgb_matrix_set_color(3, 0, 0, 0); - } - - // if on layer 4, turn on L4 LED, otherwise off. - if (get_highest_layer(state) == 3) { - rgb_matrix_set_color(2, 255, 0, 0); - } else { - rgb_matrix_set_color(2, 0, 0, 0); - } - - return state; -} - -#endif - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - if (!process_record_user(keycode, record)) { return false; } - - if (record->event.pressed) { - switch(keycode) { - #ifdef RGB_MATRIX_ENABLE - case KC_F13: // toggle rgb matrix - rgb_matrix_toggle(); - return false; - case KC_F14: - rgb_matrix_step(); - return false; - case KC_F15: - rgb_matrix_increase_speed(); - return false; - case KC_F16: - rgb_matrix_decrease_speed(); - return false; - case KC_F17: - rgb_matrix_increase_hue(); - return false; - case KC_F18: - rgb_matrix_decrease_hue(); - return false; - case KC_F19: - rgb_matrix_increase_sat(); - return false; - case KC_F20: - rgb_matrix_decrease_sat(); - return false; - case KC_F21: - rgb_matrix_increase_val(); - return false; - case KC_F22: - rgb_matrix_decrease_val(); - return false; - #endif - default: - break; - } - } - return true; -} diff --git a/keyboards/mechlovin/delphine/rgb_led/rgb_led.h b/keyboards/mechlovin/delphine/rgb_led/rgb_led.h deleted file mode 100644 index 60d5817344..0000000000 --- a/keyboards/mechlovin/delphine/rgb_led/rgb_led.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2020 Team Mechlovin' - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "quantum.h" diff --git a/keyboards/mechlovin/delphine/rgb_led/rules.mk b/keyboards/mechlovin/delphine/rgb_led/rules.mk deleted file mode 100644 index 204fb1241b..0000000000 --- a/keyboards/mechlovin/delphine/rgb_led/rules.mk +++ /dev/null @@ -1,3 +0,0 @@ -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -RGB_MATRIX_ENABLE = yes # Use RGB matrix -RGB_MATRIX_DRIVER = IS31FL3731 |