diff options
Diffstat (limited to 'keyboards/matrix/m12og/rev1')
| -rw-r--r-- | keyboards/matrix/m12og/rev1/boards/m12og_v1/board.c | 50 | ||||
| -rw-r--r-- | keyboards/matrix/m12og/rev1/boards/m12og_v1/board.h | 142 | ||||
| -rw-r--r-- | keyboards/matrix/m12og/rev1/boards/m12og_v1/board.mk | 5 | ||||
| -rw-r--r-- | keyboards/matrix/m12og/rev1/chconf.h | 40 | ||||
| -rw-r--r-- | keyboards/matrix/m12og/rev1/halconf.h | 26 | ||||
| -rw-r--r-- | keyboards/matrix/m12og/rev1/info.json | 103 | ||||
| -rw-r--r-- | keyboards/matrix/m12og/rev1/ld/m12og_v1.ld | 85 | ||||
| -rw-r--r-- | keyboards/matrix/m12og/rev1/matrix.c | 96 | ||||
| -rw-r--r-- | keyboards/matrix/m12og/rev1/mcuconf.h | 209 | ||||
| -rw-r--r-- | keyboards/matrix/m12og/rev1/readme.md | 26 | ||||
| -rw-r--r-- | keyboards/matrix/m12og/rev1/rev1.c | 32 | ||||
| -rw-r--r-- | keyboards/matrix/m12og/rev1/rev1.h | 37 |
12 files changed, 0 insertions, 851 deletions
diff --git a/keyboards/matrix/m12og/rev1/boards/m12og_v1/board.c b/keyboards/matrix/m12og/rev1/boards/m12og_v1/board.c deleted file mode 100644 index b1fc61c557..0000000000 --- a/keyboards/matrix/m12og/rev1/boards/m12og_v1/board.c +++ /dev/null @@ -1,50 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include <hal.h> - -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -#if HAL_USE_PAL || defined(__DOXYGEN__) -const PALConfig pal_default_config = -{ - {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH}, - {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH}, - {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH}, - {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH}, - {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH}, -}; -#endif - -/* - * Early initialization code. - * This initialization must be performed just after stack setup and before - * any other initialization. - */ -void __early_init(void) { - stm32_clock_init(); - -} - -/* - * Board-specific initialization code. - */ -void boardInit(void) { - -} diff --git a/keyboards/matrix/m12og/rev1/boards/m12og_v1/board.h b/keyboards/matrix/m12og/rev1/boards/m12og_v1/board.h deleted file mode 100644 index 685deb4160..0000000000 --- a/keyboards/matrix/m12og/rev1/boards/m12og_v1/board.h +++ /dev/null @@ -1,142 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Board identifier. - */ -#define BOARD_M12OG -#define BOARD_NAME "Matrix 12og keyboard" - -/* - * Board frequencies. - */ -#define STM32_LSECLK 32768 -#define STM32_HSECLK 8000000 - -/* - * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h. - * - * Only xB (128KB Flash) is defined, but it's identical to the - * x8 version (64KB Flash) except for the Flash region size in the - * linker script. For x8 parts use xB here and change to the x8 linker - * script in the project Makefile. - */ -#define STM32F103xB - -/* - * IO pins assignments - * - * numbering is sorted by onboard/connectors, as from the schematics in - * http://www.vcc-gnd.com/read.php?tid=369 - */ - -/* on-board */ -#define GPIOA_USBDM 11 // pin 8 -#define GPIOA_USBDP 12 // pin 9 - -#define GPIOC_OSC32_IN 14 -#define GPIOC_OSC32_OUT 15 - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * - * The digits have the following meaning: - * 0 - Analog input. - * 1 - Push Pull output 10MHz. - * 2 - Push Pull output 2MHz. - * 3 - Push Pull output 50MHz. - * 4 - Digital input. - * 5 - Open Drain output 10MHz. - * 6 - Open Drain output 2MHz. - * 7 - Open Drain output 50MHz. - * 8 - Digital input with PullUp or PullDown resistor depending on ODR. - * 9 - Alternate Push Pull output 10MHz. - * A - Alternate Push Pull output 2MHz. - * B - Alternate Push Pull output 50MHz. - * C - Reserved. - * D - Alternate Open Drain output 10MHz. - * E - Alternate Open Drain output 2MHz. - * F - Alternate Open Drain output 50MHz. - * Please refer to the STM32 Reference Manual for details. - */ - -/* - * Port A setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOACRL 0x88888888 /* PA7...PA0 */ -#define VAL_GPIOACRH 0x88888888 /* PA15...PA8 */ -#define VAL_GPIOAODR 0xFFFFFFFF - -/* - * Port B setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */ -#define VAL_GPIOBCRH 0x88888888 /* PB15...PB8 */ -#define VAL_GPIOBODR 0xFFFFFFFF - -/* - * Port C setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */ -#define VAL_GPIOCCRH 0x88888888 /* PC15...PC8 */ -#define VAL_GPIOCODR 0xFFFFFFFF - -/* - * Port D setup. - * Everything input with pull-up except: - * PD0 - Normal input (XTAL). - * PD1 - Normal input (XTAL). - */ -#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */ -#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */ -#define VAL_GPIODODR 0xFFFFFFFF - -/* - * Port E setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */ -#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */ -#define VAL_GPIOEODR 0xFFFFFFFF - -/* - * USB bus activation macro, required by the USB driver. - */ -#define usb_lld_connect_bus(usbp) /* always connected */ - -/* - * USB bus de-activation macro, required by the USB driver. - */ -#define usb_lld_disconnect_bus(usbp) /* always connected */ - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/keyboards/matrix/m12og/rev1/boards/m12og_v1/board.mk b/keyboards/matrix/m12og/rev1/boards/m12og_v1/board.mk deleted file mode 100644 index 48f620db1c..0000000000 --- a/keyboards/matrix/m12og/rev1/boards/m12og_v1/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/m12og_v1/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/m12og_v1 diff --git a/keyboards/matrix/m12og/rev1/chconf.h b/keyboards/matrix/m12og/rev1/chconf.h deleted file mode 100644 index 5109645a37..0000000000 --- a/keyboards/matrix/m12og/rev1/chconf.h +++ /dev/null @@ -1,40 +0,0 @@ -/* Copyright 2020 QMK - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -/* - * This file was auto-generated by: - * `qmk chibios-confmigrate -i keyboards/matrix/m12og/rev1/chconf.h -r platforms/chibios/common/configs/chconf.h` - */ - -#pragma once - -#define CH_CFG_ST_TIMEDELTA 0 - -#define CH_CFG_USE_REGISTRY TRUE - -#define CH_CFG_USE_WAITEXIT TRUE - -#define CH_CFG_USE_CONDVARS TRUE - -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE - -#define CH_CFG_USE_MESSAGES TRUE - -#define CH_CFG_USE_MAILBOXES TRUE - -#define CH_CFG_USE_HEAP TRUE - -#include_next <chconf.h> diff --git a/keyboards/matrix/m12og/rev1/halconf.h b/keyboards/matrix/m12og/rev1/halconf.h deleted file mode 100644 index 20ce9bc3c0..0000000000 --- a/keyboards/matrix/m12og/rev1/halconf.h +++ /dev/null @@ -1,26 +0,0 @@ -/* Copyright 2020 QMK - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -/* - * This file was auto-generated by: - * `qmk chibios-confmigrate -i keyboards/matrix/m12og/rev1/halconf.h -r platforms/chibios/common/configs/halconf.h` - */ - -#pragma once - -#define HAL_USE_PWM TRUE - -#include_next <halconf.h> diff --git a/keyboards/matrix/m12og/rev1/info.json b/keyboards/matrix/m12og/rev1/info.json deleted file mode 100644 index 3406beab76..0000000000 --- a/keyboards/matrix/m12og/rev1/info.json +++ /dev/null @@ -1,103 +0,0 @@ -{ - "keyboard_name": "m12og_v1", - "manufacturer": "Matrix", - "url": "", - "maintainer": "kb-elmo", - "usb": { - "vid": "0x4D58", - "pid": "0x0369", - "device_version": "0.0.1" - }, - "layouts": { - "LAYOUT_all": { - "layout": [ - {"label":"Esc", "x":0, "y":0}, - {"label":"F1", "x":2, "y":0}, - {"label":"F2", "x":3, "y":0}, - {"label":"F3", "x":4, "y":0}, - {"label":"F4", "x":5, "y":0}, - {"label":"F5", "x":6.5, "y":0}, - {"label":"F6", "x":7.5, "y":0}, - {"label":"F7", "x":8.5, "y":0}, - {"label":"F8", "x":9.5, "y":0}, - {"label":"F9", "x":11, "y":0}, - {"label":"F10", "x":12, "y":0}, - {"label":"F11", "x":13, "y":0}, - {"label":"F12", "x":14, "y":0}, - {"label":"PrtSc", "x":15.25, "y":0}, - {"label":"Scroll Lock", "x":16.25, "y":0}, - {"label":"Pause", "x":17.25, "y":0}, - {"label":"~", "x":0, "y":1.5}, - {"label":"!", "x":1, "y":1.5}, - {"label":"@", "x":2, "y":1.5}, - {"label":"#", "x":3, "y":1.5}, - {"label":"$", "x":4, "y":1.5}, - {"label":"%", "x":5, "y":1.5}, - {"label":"^", "x":6, "y":1.5}, - {"label":"&", "x":7, "y":1.5}, - {"label":"*", "x":8, "y":1.5}, - {"label":"(", "x":9, "y":1.5}, - {"label":")", "x":10, "y":1.5}, - {"label":"_", "x":11, "y":1.5}, - {"label":"+", "x":12, "y":1.5}, - {"label":"Backspace", "x":13, "y":1.5, "w":2}, - {"label":"Insert", "x":15.25, "y":1.5}, - {"label":"Home", "x":16.25, "y":1.5}, - {"label":"PgUp", "x":17.25, "y":1.5}, - {"label":"Tab", "x":0, "y":2.5, "w":1.5}, - {"label":"Q", "x":1.5, "y":2.5}, - {"label":"W", "x":2.5, "y":2.5}, - {"label":"E", "x":3.5, "y":2.5}, - {"label":"R", "x":4.5, "y":2.5}, - {"label":"T", "x":5.5, "y":2.5}, - {"label":"Y", "x":6.5, "y":2.5}, - {"label":"U", "x":7.5, "y":2.5}, - {"label":"I", "x":8.5, "y":2.5}, - {"label":"O", "x":9.5, "y":2.5}, - {"label":"P", "x":10.5, "y":2.5}, - {"label":"{", "x":11.5, "y":2.5}, - {"label":"}", "x":12.5, "y":2.5}, - {"label":"|", "x":13.5, "y":2.5, "w":1.5}, - {"label":"Delete", "x":15.25, "y":2.5}, - {"label":"End", "x":16.25, "y":2.5}, - {"label":"PgDn", "x":17.25, "y":2.5}, - {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, - {"label":"A", "x":1.75, "y":3.5}, - {"label":"S", "x":2.75, "y":3.5}, - {"label":"D", "x":3.75, "y":3.5}, - {"label":"F", "x":4.75, "y":3.5}, - {"label":"G", "x":5.75, "y":3.5}, - {"label":"H", "x":6.75, "y":3.5}, - {"label":"J", "x":7.75, "y":3.5}, - {"label":"K", "x":8.75, "y":3.5}, - {"label":"L", "x":9.75, "y":3.5}, - {"label":":", "x":10.75, "y":3.5}, - {"label":"\"", "x":11.75, "y":3.5}, - {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, - {"label":"Shift", "x":0, "y":4.5, "w":2.25}, - {"label":"Z", "x":2.25, "y":4.5}, - {"label":"X", "x":3.25, "y":4.5}, - {"label":"C", "x":4.25, "y":4.5}, - {"label":"V", "x":5.25, "y":4.5}, - {"label":"B", "x":6.25, "y":4.5}, - {"label":"N", "x":7.25, "y":4.5}, - {"label":"M", "x":8.25, "y":4.5}, - {"label":"<", "x":9.25, "y":4.5}, - {"label":">", "x":10.25, "y":4.5}, - {"label":"?", "x":11.25, "y":4.5}, - {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, - {"label":"\u2191", "x":16.25, "y":4.5}, - {"label":"Ctrl", "x":0, "y":5.5, "w":1.5}, - {"label":"Win", "x":1.5, "y":5.5}, - {"label":"Alt", "x":2.5, "y":5.5, "w":1.5}, - {"x":4, "y":5.5, "w":7}, - {"label":"Win", "x":11, "y":5.5, "w":1.5}, - {"label":"Menu", "x":12.5, "y":5.5}, - {"label":"Ctrl", "x":13.5, "y":5.5, "w":1.5}, - {"label":"\u2190", "x":15.25, "y":5.5}, - {"label":"\u2193", "x":16.25, "y":5.5}, - {"label":"\u2192", "x":17.25, "y":5.5} - ] - } - } -} diff --git a/keyboards/matrix/m12og/rev1/ld/m12og_v1.ld b/keyboards/matrix/m12og/rev1/ld/m12og_v1.ld deleted file mode 100644 index ad04d6d170..0000000000 --- a/keyboards/matrix/m12og/rev1/ld/m12og_v1.ld +++ /dev/null @@ -1,85 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F103xB memory setup for use with the matrix 12og mass-storage device bootloader. - */ -MEMORY -{ - flash0 : org = 0x08018000, len = 128k - 0x18000 - flash1 : org = 0x00000000, len = 0 - flash2 : org = 0x00000000, len = 0 - flash3 : org = 0x00000000, len = 0 - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x20000000, len = 20k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash0); -REGION_ALIAS("XTORS_FLASH_LMA", flash0); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash0); -REGION_ALIAS("TEXT_FLASH_LMA", flash0); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash0); -REGION_ALIAS("RODATA_FLASH_LMA", flash0); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash0); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts.*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash0); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for the default heap.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -/* Generic rules inclusion.*/ -INCLUDE rules.ld diff --git a/keyboards/matrix/m12og/rev1/matrix.c b/keyboards/matrix/m12og/rev1/matrix.c deleted file mode 100644 index 9c36153da1..0000000000 --- a/keyboards/matrix/m12og/rev1/matrix.c +++ /dev/null @@ -1,96 +0,0 @@ -/* Copyright 2021 xyzz - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <stdint.h> -#include <stdbool.h> -#include "util.h" -#include "matrix.h" -#include "debounce.h" -#include "quantum.h" - -static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; - -static void select_col(uint8_t col) { - setPinOutput(col_pins[col]); - writePinHigh(col_pins[col]); -} - -static void unselect_col(uint8_t col) { setPinInputLow(col_pins[col]); } - -static void unselect_cols(void) { - for (uint8_t x = 0; x < MATRIX_COLS; x++) { - setPinInputLow(col_pins[x]); - } -} - -static void init_pins(void) { - unselect_cols(); - for (uint8_t x = 0; x < MATRIX_ROWS; x++) { - setPinInputLow(row_pins[x]); - } -} - -static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) { - bool matrix_changed = false; - - // Select col and wait for col selecton to stabilize - select_col(current_col); - matrix_io_delay(); - - // For each row... - for (uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++) { - // Store last value of row prior to reading - matrix_row_t last_row_value = current_matrix[row_index]; - matrix_row_t current_row_value = last_row_value; - - // Check row pin state - if (readPin(row_pins[row_index]) != 0) { - // Pin LO, set col bit - current_row_value |= (MATRIX_ROW_SHIFTER << current_col); - } else { - // Pin HI, clear col bit - current_row_value &= ~(MATRIX_ROW_SHIFTER << current_col); - } - - // Determine if the matrix changed state - if ((last_row_value != current_row_value)) { - matrix_changed |= true; - current_matrix[row_index] = current_row_value; - } - } - - // Unselect col - unselect_col(current_col); - - return matrix_changed; -} - -void matrix_init_custom(void) { - // initialize key pins - init_pins(); -} - -uint8_t matrix_scan_custom(matrix_row_t current_matrix[]) { - bool changed = false; - - // Set col, read rows - for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { - changed |= read_rows_on_col(current_matrix, current_col); - } - - return (uint8_t)changed; -} diff --git a/keyboards/matrix/m12og/rev1/mcuconf.h b/keyboards/matrix/m12og/rev1/mcuconf.h deleted file mode 100644 index a645d3c5d5..0000000000 --- a/keyboards/matrix/m12og/rev1/mcuconf.h +++ /dev/null @@ -1,209 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 TRUE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/matrix/m12og/rev1/readme.md b/keyboards/matrix/m12og/rev1/readme.md deleted file mode 100644 index e860be1575..0000000000 --- a/keyboards/matrix/m12og/rev1/readme.md +++ /dev/null @@ -1,26 +0,0 @@ -# Matrix 8XV1.2 OG keyboard - - - -This was the Matrix 8XV1.2 OG keyboard made by the Matrix team. -Note: This firmware only supports ANSI only version (green/yellow PCB), and DOES NOT support the 8XV1.2 OG ISO/ANSI version. - -* Keyboard Maintainer: [kb-elmo](https://github.com/kb-elmo) -* Hardware Supported: Matrix 8XV1.2 OG ANSI only PCB -* Hardware Availability: Matrix Lab - -Make example for this keyboard (after setting up your build environment): - - make matrix/m12og/rev1:default - ---- -**Bootloader:** - -Hold down ESC while plugging in the keyboard. The board will show up as a mass storage device on your computer. Drag and drop the compiled firmware .bin file into it. The board will automatically reset and load the new firmware. - -:no_entry: **DO NOT DO THIS ON A MAC OS SYSTEM! IT WILL PERMANENTLY BRICK THE KEYBOARD!!!** - ---- - - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/matrix/m12og/rev1/rev1.c b/keyboards/matrix/m12og/rev1/rev1.c deleted file mode 100644 index 53183c7d2d..0000000000 --- a/keyboards/matrix/m12og/rev1/rev1.c +++ /dev/null @@ -1,32 +0,0 @@ -/* Copyright 2021 kb-elmo<mail@elmo.space> - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "rev1.h" - -void board_init(void) { - writePinLow(A8); -} - -void bootloader_jump(void) { - // This board doesn't use the standard DFU bootloader, and no information is available regarding how to enter bootloader mode. All we can do here is reset. - NVIC_SystemReset(); -} - -void keyboard_post_init_kb(void) { - rgblight_enable_noeeprom(); - rgblight_sethsv_noeeprom(5, 255, 255); - rgblight_mode_noeeprom(37); -} diff --git a/keyboards/matrix/m12og/rev1/rev1.h b/keyboards/matrix/m12og/rev1/rev1.h deleted file mode 100644 index 6bc656fe9b..0000000000 --- a/keyboards/matrix/m12og/rev1/rev1.h +++ /dev/null @@ -1,37 +0,0 @@ -/* Copyright 2021 kb-elmo<mail@elmo.space> - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "quantum.h" - -#define ____ KC_NO - -#define LAYOUT_all( \ - k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014, k015, \ - k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k213, k313, k114, k115, \ - k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k113, k314, k214, k215, \ - k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, \ - k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k410, k411, k412, \ - k500, k501, k502, k505, k506, k507, k508, k413, k414, k315 \ - |