diff options
Diffstat (limited to 'keyboards/maartenwut')
18 files changed, 1530 insertions, 40 deletions
diff --git a/keyboards/maartenwut/plain60/keymaps/via/keymap.c b/keyboards/maartenwut/plain60/keymaps/via/keymap.c index 7e8cfff354..a500f23896 100644 --- a/keyboards/maartenwut/plain60/keymaps/via/keymap.c +++ b/keyboards/maartenwut/plain60/keymaps/via/keymap.c @@ -1,17 +1,32 @@ #include QMK_KEYBOARD_H -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _MA 0 - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[_MA] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, \ - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTRL) +[0] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTRL), + +[1] = LAYOUT( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______), + +[2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______), + +[3] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______), }; diff --git a/keyboards/maartenwut/ta65/config.h b/keyboards/maartenwut/ta65/config.h index d54a6273d8..729f21a2e2 100644 --- a/keyboards/maartenwut/ta65/config.h +++ b/keyboards/maartenwut/ta65/config.h @@ -24,7 +24,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define PRODUCT_ID 0x7465 #define DEVICE_VER 0x0001 #define MANUFACTURER Maartenwut -#define PRODUCT TA-65 +#define PRODUCT ta-65 #define DESCRIPTION A universal 65% PCB with underglow. /* key matrix size */ @@ -37,6 +37,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_COL_PINS {D2,D1,D0,D3,D5,C7,C6,B6,B5,F0,F1,F4,F5,F6,F7,B0} #define UNUSED_PINS +#define ENCODERS_PAD_A { B2 } +#define ENCODERS_PAD_B { B1 } + +/* Uncomment if your encoder doesn't react to every turn or skips */ +//#define ENCODER_RESOLUTION 2 + /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/maartenwut/ta65/keymaps/default/keymap.c b/keyboards/maartenwut/ta65/keymaps/default/keymap.c index b04172c759..8bb8a14ba0 100644 --- a/keyboards/maartenwut/ta65/keymaps/default/keymap.c +++ b/keyboards/maartenwut/ta65/keymaps/default/keymap.c @@ -1,17 +1,38 @@ #include QMK_KEYBOARD_H -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _MA 0 - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[_MA] = LAYOUT_all( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_GRV, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_PGUP, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_APP, KC_RCTRL, KC_LEFT, KC_DOWN, KC_RGHT) +[0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTRL, KC_LEFT, KC_DOWN, KC_RGHT), + +[1] = LAYOUT_all( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + }; + +void encoder_update_user(uint8_t index, bool clockwise) { + switch(get_highest_layer(layer_state)){ + case 1: //Layer 1 + if (!clockwise) { // Remove ! to reverse direction + tap_code(KC_WH_U); + } else { + tap_code(KC_WH_D); + } + break; + default: //Layer 0 + if (!clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + break; + } +} diff --git a/keyboards/maartenwut/ta65/rules.mk b/keyboards/maartenwut/ta65/rules.mk index db0567bd03..86efb933bb 100644 --- a/keyboards/maartenwut/ta65/rules.mk +++ b/keyboards/maartenwut/ta65/rules.mk @@ -12,19 +12,24 @@ MCU = atmega32u4 BOOTLOADER = qmk-dfu # Build Options -# comment out to disable the options. +# change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs +ENCODER_ENABLE = yes LAYOUTS = 65_ansi 65_iso diff --git a/keyboards/maartenwut/wasdat/info.json b/keyboards/maartenwut/wasdat/info.json index 8f931f46cf..6154bd5555 100644 --- a/keyboards/maartenwut/wasdat/info.json +++ b/keyboards/maartenwut/wasdat/info.json @@ -185,7 +185,6 @@ {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, - {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, @@ -209,6 +208,7 @@ {"label":":", "x":10.75, "y":3.5}, {"label":"@", "x":11.75, "y":3.5}, {"label":"~", "x":12.75, "y":3.5}, + {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, {"label":"4", "x":18.5, "y":3.5}, {"label":"5", "x":19.5, "y":3.5}, @@ -405,7 +405,6 @@ {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, - {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, @@ -424,6 +423,7 @@ {"label":":", "x":10.75, "y":3.5}, {"label":"@", "x":11.75, "y":3.5}, {"label":"~", "x":12.75, "y":3.5}, + {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"label":"|", "x":1.25, "y":4.5}, diff --git a/keyboards/maartenwut/wasdat_code/config.h b/keyboards/maartenwut/wasdat_code/config.h new file mode 100644 index 0000000000..16d5acd9c4 --- /dev/null +++ b/keyboards/maartenwut/wasdat_code/config.h @@ -0,0 +1,258 @@ +/* +Copyright 2019 Maarten Dekkers <maartenwut@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4705 +#define PRODUCT_ID 0xB00E +#define DEVICE_VER 0x0001 +#define MANUFACTURER Maartenwut +#define PRODUCT Wasdat Code +#define DESCRIPTION Custom controller for the WASD CODE TKL and 104-key keyboards + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 16 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { E6, C7, C6, B6, B5, B4, D7, D6 } +#define MATRIX_COL_PINS { } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION ROW2COL + +// For QMK DFU +#define QMK_ESC_OUTPUT E6 +#define QMK_ESC_INPUT F0 +#define QMK_LED B1 + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +#define BACKLIGHT_PIN B7 +#define BACKLIGHT_BREATHING +#define BACKLIGHT_LEVELS 5 + +// #define RGB_DI_PIN E2 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 16 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line +#endif +*/ + +/* Bootmagic Lite key configuration */ +#define BOOTMAGIC_LITE_ROW 2 +#define BOOTMAGIC_LITE_COLUMN 3 + +#define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/maartenwut/wasdat_code/info.json b/keyboards/maartenwut/wasdat_code/info.json new file mode 100644 index 0000000000..526883f8d5 --- /dev/null +++ b/keyboards/maartenwut/wasdat_code/info.json @@ -0,0 +1,459 @@ +{ + "keyboard_name": "Wasdat Code", + "url": "https://maartenwut.com/product/wasdat-code/", + "maintainer": "Maartenwut", + "width": 22.5, + "height": 6.5, + "layouts": { + "LAYOUT_fullsize_ansi": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"~", "x":0, "y":1.5}, + {"label":"1", "x":1, "y":1.5}, + {"label":"2", "x":2, "y":1.5}, + {"label":"3", "x":3, "y":1.5}, + {"label":"4", "x":4, "y":1.5}, + {"label":"5", "x":5, "y":1.5}, + {"label":"6", "x":6, "y":1.5}, + {"label":"7", "x":7, "y":1.5}, + {"label":"8", "x":8, "y":1.5}, + {"label":"9", "x":9, "y":1.5}, + {"label":"0", "x":10, "y":1.5}, + {"label":"_", "x":11, "y":1.5}, + {"label":"+", "x":12, "y":1.5}, + {"label":"Backspace", "x":13, "y":1.5, "w":2}, + + {"label":"Insert", "x":15.25, "y":1.5}, + {"label":"Home", "x":16.25, "y":1.5}, + {"label":"PgUp", "x":17.25, "y":1.5}, + + {"label":"Num Lock", "x":18.5, "y":1.5}, + {"label":"/", "x":19.5, "y":1.5}, + {"label":"*", "x":20.5, "y":1.5}, + {"label":"-", "x":21.5, "y":1.5}, + + {"label":"Tab", "x":0, "y":2.5, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.5}, + {"label":"W", "x":2.5, "y":2.5}, + {"label":"E", "x":3.5, "y":2.5}, + {"label":"R", "x":4.5, "y":2.5}, + {"label":"T", "x":5.5, "y":2.5}, + {"label":"Y", "x":6.5, "y":2.5}, + {"label":"U", "x":7.5, "y":2.5}, + {"label":"I", "x":8.5, "y":2.5}, + {"label":"O", "x":9.5, "y":2.5}, + {"label":"P", "x":10.5, "y":2.5}, + {"label":"{", "x":11.5, "y":2.5}, + {"label":"}", "x":12.5, "y":2.5}, + {"label":"|", "x":13.5, "y":2.5, "w":1.5}, + + {"label":"Delete", "x":15.25, "y":2.5}, + {"label":"End", "x":16.25, "y":2.5}, + {"label":"PgDn", "x":17.25, "y":2.5}, + + {"label":"7", "x":18.5, "y":2.5}, + {"label":"8", "x":19.5, "y":2.5}, + {"label":"9", "x":20.5, "y":2.5}, + {"label":"+", "x":21.5, "y":2.5, "h":2}, + + {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, + {"label":"A", "x":1.75, "y":3.5}, + {"label":"S", "x":2.75, "y":3.5}, + {"label":"D", "x":3.75, "y":3.5}, + {"label":"F", "x":4.75, "y":3.5}, + {"label":"G", "x":5.75, "y":3.5}, + {"label":"H", "x":6.75, "y":3.5}, + {"label":"J", "x":7.75, "y":3.5}, + {"label":"K", "x":8.75, "y":3.5}, + {"label":"L", "x":9.75, "y":3.5}, + {"label":":", "x":10.75, "y":3.5}, + {"label":"\"", "x":11.75, "y":3.5}, + {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, + + {"label":"4", "x":18.5, "y":3.5}, + {"label":"5", "x":19.5, "y":3.5}, + {"label":"6", "x":20.5, "y":3.5}, + + {"label":"Shift", "x":0, "y":4.5, "w":2.25}, + {"label":"Z", "x":2.25, "y":4.5}, + {"label":"X", "x":3.25, "y":4.5}, + {"label":"C", "x":4.25, "y":4.5}, + {"label":"V", "x":5.25, "y":4.5}, + {"label":"B", "x":6.25, "y":4.5}, + {"label":"N", "x":7.25, "y":4.5}, + {"label":"M", "x":8.25, "y":4.5}, + {"label":"<", "x":9.25, "y":4.5}, + {"label":">", "x":10.25, "y":4.5}, + {"label":"?", "x":11.25, "y":4.5}, + {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, + + {"label":"\u2191", "x":16.25, "y":4.5}, + + {"label":"1", "x":18.5, "y":4.5}, + {"label":"2", "x":19.5, "y":4.5}, + {"label":"3", "x":20.5, "y":4.5}, + {"label":"Enter", "x":21.5, "y":4.5, "h":2}, + + {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, + {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, + {"x":3.75, "y":5.5, "w":6.25}, + {"label":"Alt", "x":10, "y":5.5, "w":1.25}, + {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, + {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, + + {"label":"\u2190", "x":15.25, "y":5.5}, + {"label":"\u2193", "x":16.25, "y":5.5}, + {"label":"\u2192", "x":17.25, "y":5.5}, + + {"label":"0", "x":18.5, "y":5.5, "w":2}, + {"label":".", "x":20.5, "y":5.5} + ] + }, + "LAYOUT_fullsize_iso": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"\u00ac", "x":0, "y":1.5}, + {"label":"!", "x":1, "y":1.5}, + {"label":"\"", "x":2, "y":1.5}, + {"label":"\u00a3", "x":3, "y":1.5}, + {"label":"$", "x":4, "y":1.5}, + {"label":"%", "x":5, "y":1.5}, + {"label":"^", "x":6, "y":1.5}, + {"label":"&", "x":7, "y":1.5}, + {"label":"*", "x":8, "y":1.5}, + {"label":"(", "x":9, "y":1.5}, + {"label":")", "x":10, "y":1.5}, + {"label":"_", "x":11, "y":1.5}, + {"label":"+", "x":12, "y":1.5}, + {"label":"Backspace", "x":13, "y":1.5, "w":2}, + + {"label":"Insert", "x":15.25, "y":1.5}, + {"label":"Home", "x":16.25, "y":1.5}, + {"label":"PgUp", "x":17.25, "y":1.5}, + + {"label":"Num Lock", "x":18.5, "y":1.5}, + {"label":"/", "x":19.5, "y":1.5}, + {"label":"*", "x":20.5, "y":1.5}, + {"label":"-", "x":21.5, "y":1.5}, + + {"label":"Tab", "x":0, "y":2.5, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.5}, + {"label":"W", "x":2.5, "y":2.5}, + {"label":"E", "x":3.5, "y":2.5}, + {"label":"R", "x":4.5, "y":2.5}, + {"label":"T", "x":5.5, "y":2.5}, + {"label":"Y", "x":6.5, "y":2.5}, + {"label":"U", "x":7.5, "y":2.5}, + {"label":"I", "x":8.5, "y":2.5}, + {"label":"O", "x":9.5, "y":2.5}, + {"label":"P", "x":10.5, "y":2.5}, + {"label":"{", "x":11.5, "y":2.5}, + {"label":"}", "x":12.5, "y":2.5}, + + {"label":"Delete", "x":15.25, "y":2.5}, + {"label":"End", "x":16.25, "y":2.5}, + {"label":"PgDn", "x":17.25, "y":2.5}, + + {"label":"7", "x":18.5, "y":2.5}, + {"label":"8", "x":19.5, "y":2.5}, + {"label":"9", "x":20.5, "y":2.5}, + {"label":"+", "x":21.5, "y":2.5, "h":2}, + + {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, + {"label":"A", "x":1.75, "y":3.5}, + {"label":"S", "x":2.75, "y":3.5}, + {"label":"D", "x":3.75, "y":3.5}, + {"label":"F", "x":4.75, "y":3.5}, + {"label":"G", "x":5.75, "y":3.5}, + {"label":"H", "x":6.75, "y":3.5}, + {"label":"J", "x":7.75, "y":3.5}, + {"label":"K", "x":8.75, "y":3.5}, + {"label":"L", "x":9.75, "y":3.5}, + {"label":":", "x":10.75, "y":3.5}, + {"label":"@", "x":11.75, "y":3.5}, + {"label":"~", "x":12.75, "y":3.5}, + {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, + + {"label":"4", "x":18.5, "y":3.5}, + {"label":"5", "x":19.5, "y":3.5}, + {"label":"6", "x":20.5, "y":3.5}, + + {"label":"Shift", "x":0, "y":4.5, "w":1.25}, + {"label":"|", "x":1.25, "y":4.5}, + {"label":"Z", "x":2.25, "y":4.5}, + {"label":"X", "x":3.25, "y":4.5}, + {"label":"C", "x":4.25, "y":4.5}, + {"label":"V", "x":5.25, "y":4.5}, + {"label":"B", "x":6.25, "y":4.5}, + {"label":"N", "x":7.25, "y":4.5}, + {"label":"M", "x":8.25, "y":4.5}, + {"label":"<", "x":9.25, "y":4.5}, + {"label":">", "x":10.25, "y":4.5}, + {"label":"?", "x":11.25, "y":4.5}, + {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, + + {"label":"\u2191", "x":16.25, "y":4.5}, + + {"label":"1", "x":18.5, "y":4.5}, + {"label":"2", "x":19.5, "y":4.5}, + {"label":"3", "x":20.5, "y":4.5}, + {"label":"Enter", "x":21.5, "y":4.5, "h":2}, + + {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, + {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, + {"x":3.75, "y":5.5, "w":6.25}, + {"label":"AltGr", "x":10, "y":5.5, "w":1.25}, + {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, + {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, + + {"label":"\u2190", "x":15.25, "y":5.5}, + {"label":"\u2193", "x":16.25, "y":5.5}, + {"label":"\u2192", "x":17.25, "y":5.5}, + + {"label":"0", "x":18.5, "y":5.5, "w":2}, + {"label":".", "x":20.5, "y":5.5} + ] + }, + "LAYOUT_tkl_ansi": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0},</ |